Date: Tue, 19 Mar 2013 13:44:59 GMT From: Goran Lowkrantz <goran.lowkrantz@ismobile.com> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/177108: mvs driver with MV88SX6081 have timeout waiting for write DRQ Message-ID: <201303191344.r2JDixwO092282@red.freebsd.org> Resent-Message-ID: <201303191350.r2JDo17s023425@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 177108 >Category: kern >Synopsis: mvs driver with MV88SX6081 have timeout waiting for write DRQ >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Tue Mar 19 13:50:00 UTC 2013 >Closed-Date: >Last-Modified: >Originator: Goran Lowkrantz >Release: 9.1-PRERELEASE >Organization: isMobile AB >Environment: FreeBSD utgard.hq.ismobile.com 9.1-PRERELEASE FreeBSD 9.1-PRERELEASE #0 r243780M: Sun Dec 2 22:57:58 UTC 2012 root@midgard.glz.hidden-powers.com:/usr/obj/nanobsd.utgard/usr/src/sys/GENERIC >Description: When upgrading from FreeBSD 8.2-STABLE #0: Sun Sep 25 03:26:06 CEST 2011 to FreeBSD 9.1-PRERELEASE #0 r243780M: Sun Dec 2 22:57:58 UTC 2012 we found that the a number of devices over two SUPERMICRO AOC-SAT2-MV8 64-bit PCI-X133MHz SATA II (3.0Gb/s) Controller Card started to experience timeouts. They work just fine under 8.2 but are unusable due to the timeouts in 9.1. Disks are direct attached, no port multiplier. Problem devices are ada1, ada2, ada8, ada9, ada10, ada11. Errors are a mix of these two on the affected devices. mvsch8: Wait status 50 mvsch8: timeout waiting for write DRQ (ada8:mvsch8:0:0:0): WRITE_MUL48. ACB: 39 00 a8 49 06 40 95 00 00 00 01 00 (ada8:mvsch8:0:0:0): CAM status: Command timeout (ada8:mvsch8:0:0:0): Retrying command mvsch2: Wait status 50 mvsch2: timeout waiting for write DRQ (ada2:mvsch2:0:0:0): WRITE_MUL. ACB: c5 00 64 73 05 4c 00 00 00 00 03 00 (ada2:mvsch2:0:0:0): CAM status: Command timeout (ada2:mvsch2:0:0:0): Retrying command camcontrol devlist -v: scbus1 on mvsch0 bus 0: <ST31500341AS CC1H> at scbus1 target 0 lun 0 (pass2,ada0) scbus2 on mvsch1 bus 0: <ST31500341AS CC1H> at scbus2 target 0 lun 0 (pass3,ada1) scbus3 on mvsch2 bus 0: <WDC WD2003FYYS-02W0B0 01.01D01> at scbus3 target 0 lun 0 (pass4,ada2) scbus4 on mvsch3 bus 0: <WDC WD2003FYYS-02W0B0 01.01D01> at scbus4 target 0 lun 0 (pass5,ada3) scbus5 on mvsch4 bus 0: <ST2000DM001-1CH164 CC43> at scbus5 target 0 lun 0 (pass6,ada4) scbus6 on mvsch5 bus 0: <ST2000DM001-1CH164 CC43> at scbus6 target 0 lun 0 (pass7,ada5) scbus7 on mvsch6 bus 0: <ST2000DM001-1CH164 CC43> at scbus7 target 0 lun 0 (pass8,ada6) scbus8 on mvsch7 bus 0: <ST3000DM001-9YN166 CC4H> at scbus8 target 0 lun 0 (pass9,ada7) scbus9 on mvsch8 bus 0: <ST31500341AS CC1H> at scbus9 target 0 lun 0 (pass10,ada8) scbus10 on mvsch9 bus 0: <ST31500341AS CC1H> at scbus10 target 0 lun 0 (pass11,ada9) scbus11 on mvsch10 bus 0: <WDC WD2003FYYS-02W0B0 01.01D01> at scbus11 target 0 lun 0 (pass12,ada10) scbus12 on mvsch11 bus 0: <WDC WD2003FYYS-02W0B0 01.01D01> at scbus12 target 0 lun 0 (pass13,ada11) scbus13 on mvsch12 bus 0: <ST2000DM001-1CH164 CC43> at scbus13 target 0 lun 0 (pass14,ada12) scbus14 on mvsch13 bus 0: <ST2000DM001-1CH164 CC43> at scbus14 target 0 lun 0 (pass15,ada13) scbus15 on mvsch14 bus 0: <ST2000DM001-1CH164 CC43> at scbus15 target 0 lun 0 (pass16,ada14) scbus16 on mvsch15 bus 0: <INTEL SSDSA2M160G2GC 2CV102HD> at scbus16 target 0 lun 0 (pass17,ada15) Controllers: mvs0: <Marvell 88SX6081 SATA controller> port 0xa800-0xa8ff mem 0xfb800000-0xfb8fffff,0xfb400000-0xfb7fffff irq 28 at device 2.0 on pci6 mvs0: Gen-II, 8 3Gbps ports, Port Multiplier supported mvs0: [ITHREAD] mvsch0: <Marvell SATA channel> at channel 0 on mvs0 mvsch0: [ITHREAD] mvsch1: <Marvell SATA channel> at channel 1 on mvs0 mvsch1: [ITHREAD] mvsch2: <Marvell SATA channel> at channel 2 on mvs0 mvsch2: [ITHREAD] mvsch3: <Marvell SATA channel> at channel 3 on mvs0 mvsch3: [ITHREAD] mvsch4: <Marvell SATA channel> at channel 4 on mvs0 mvsch4: [ITHREAD] mvsch5: <Marvell SATA channel> at channel 5 on mvs0 mvsch5: [ITHREAD] mvsch6: <Marvell SATA channel> at channel 6 on mvs0 mvsch6: [ITHREAD] mvsch7: <Marvell SATA channel> at channel 7 on mvs0 mvsch7: [ITHREAD] pcib11: <ACPI PCI-PCI bridge> at device 0.2 on pci4 mvs1: <Marvell 88SX6081 SATA controller> port 0x9800-0x98ff mem 0xfa700000-0xfa7fffff,0xfac00000-0xfaffffff irq 48 at device 1.0 on pci5 mvs1: Gen-II, 8 3Gbps ports, Port Multiplier supported mvs1: [ITHREAD] mvsch8: <Marvell SATA channel> at channel 0 on mvs1 mvsch8: [ITHREAD] mvsch9: <Marvell SATA channel> at channel 1 on mvs1 mvsch9: [ITHREAD] mvsch10: <Marvell SATA channel> at channel 2 on mvs1 mvsch10: [ITHREAD] mvsch11: <Marvell SATA channel> at channel 3 on mvs1 mvsch11: [ITHREAD] mvsch12: <Marvell SATA channel> at channel 4 on mvs1 mvsch12: [ITHREAD] mvsch13: <Marvell SATA channel> at channel 5 on mvs1 mvsch13: [ITHREAD] mvsch14: <Marvell SATA channel> at channel 6 on mvs1 mvsch14: [ITHREAD] mvsch15: <Marvell SATA channel> at channel 7 on mvs1 mvsch15: [ITHREAD] /glz >How-To-Repeat: Boot 9.1 image. Access file systems on any of the devices. >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201303191344.r2JDixwO092282>