Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 25 Mar 2009 08:46:35 +0800
From:      wsk <wsk@gddsn.org.cn>
To:        Robert Noland <rnoland@FreeBSD.org>
Cc:        stable@freebsd.org, x11@freebsd.org, current@freebsd.org
Subject:   Re: [PREVIEW] Nouveau on FreeBSD (Take 2)
Message-ID:  <49C97EEB.4090607@gddsn.org.cn>
In-Reply-To: <1237882591.1771.26.camel@balrog.2hip.net>
References:  <49B88449.3000403@gddsn.org.cn> <49B8AC04.10508@gddsn.org.cn>	 <49C6E5C6.60306@gddsn.org.cn> <1237798914.2110.24.camel@balrog.2hip.net>	 <49C85F4E.5050002@gddsn.org.cn> <1237882591.1771.26.camel@balrog.2hip.net>

next in thread | previous in thread | raw e-mail | index | archive | help
Robert Noland wrote:
> On Tue, 2009-03-24 at 12:19 +0800, wsk wrote:
>   
>> Robert Noland wrote:
>>     
>>> On Mon, 2009-03-23 at 09:28 +0800, wsk wrote:
>>>   
>>>       
>>>>> Ok, this patch should work on NV50 chips also.
>>>>>       
>>>>> What you get is EXA and Xv.
>>>>>       
>>>>> You still need:
>>>>>       
>>>>> A recent -CURRENT or -STABLE.
>>>>>       
>>>>> git master of libdrm and xf86-video-nouveau.
>>>>>       
>>>>> This patch.
>>>>>       
>>>>> Things I've figured out since the last patch...
>>>>>       
>>>>> On NV50 class hardware you need to have a compositing manager running
>>>>> for Xv to work.  That means xcompmgr, metacity with composite enabled,
>>>>> xfce (rumored to work as well, haven't tried).  If your running Gnome
>>>>> with metacity, open gconf-editor and go to apps->metacity->general and
>>>>> check the composite box.
>>>>>       
>>>>> On NV40 class hardware, you don't need the composite manager.  In fact
>>>>> (at least with Xserver 1.6 which I'm running now), if a composite
>>>>> manager is enabled, I'm seeing high cpu utilization from Xorg under some
>>>>> circumstances.  I don't think this is a drm issue, but still an issue.
>>>>> For me, if I start a video using mplayer in an xterm, cpu is fine as
>>>>> long as that xterm is the foreground window.  If it is not the
>>>>> foreground window, even if it isn't obscured I see the cpu utilization.
>>>>> Disabling the composite manager makes everything fine.
>>>>>       
>>>>> http://people.freebsd.org/~rnoland/drm-nouveau-032109.patch <http://people.freebsd.org/%7Ernoland/drm-nouveau-032109.patch>;
>>>>>       
>>>>> robert.
>>>>>       
>>>>>           
>>>> get the following errors and exitThis is a pre-release version of the X server from The X.Org Foundation.
>>>> It is not supported in any way.
>>>> Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
>>>> Select the "xorg" product for bugs you find in this release.
>>>> Before reporting bugs in pre-release versions please check the
>>>> latest version in the X.Org Foundation git repository.
>>>> See http://wiki.x.org/wiki/GitPage for git access instructions.
>>>>
>>>> X.Org X Server 1.5.99.902 (1.6.0 RC 2)
>>>> Release Date: 2009-1-30
>>>> X Protocol Version 11, Revision 0
>>>> Build Operating System: FreeBSD 7.1-STABLE amd64
>>>> Current Operating System: FreeBSD lp.gddsn.org.cn 7.2-PRERELEASE FreeBSD 7.2-PRE
>>>> RELEASE #2: Sun Mar 22 19:44:23 CST 2009     wsk@lp.gddsn.org.cn:/usr/obj/usr/sr
>>>> c/sys/WSK amd64
>>>> Build Date: 06 February 2009  04:22:44PM
>>>>
>>>>         Before reporting problems, check http://wiki.x.org
>>>>         to make sure that you have the latest version.
>>>> Markers: (--) probed, (**) from config file, (==) default setting,
>>>>         (++) from command line, (!!) notice, (II) informational,
>>>>         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>>>> (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 23 09:14:03 2009
>>>> ing config file: "xorg.conf1"
>>>> error: [drm:pid30722:drm_alloc_resource] *ERROR* Couldn't find resource 0x2
>>>> error: [drm:pid30722:drm_alloc_resource] *ERROR* Couldn't find resource 0x2
>>>> error: [drm:pid30722:drm_alloc_resource] *ERROR* Couldn't find resource 0x2
>>>> vgapci0: 0x10000000 bytes of rid 0x14 res 3 failed (0, 0xffffffffffffffff).
>>>> error: [drm:pid30722:drm_alloc_resource] *ERROR* Couldn't find resource 0x1
>>>> vgapci0: 0x10000000 bytes of rid 0x14 res 3 failed (0, 0xffffffffffffffff).
>>>> error: [drm:pid30722:drm_alloc_resource] *ERROR* Couldn't find resource 0x1
>>>> drm0: [ITHREAD]
>>>> info: [drm] Allocating FIFO number 1
>>>> info: [drm] nouveau_fifo_alloc: initialised FIFO 1
>>>> info: [drm] PFIFO_DMA_PUSHER - Ch 1
>>>> (EE) NOUVEAU(0): 1296: No valid FB address in PCI config space
>>>> (EE) Screen(s) found, but none have a usable configuration.
>>>>
>>>> Fatal server error:
>>>> no screens found
>>>>
>>>> Please consult the The X.Org Foundation support
>>>>          at http://wiki.x.org
>>>>  for help.
>>>> Please also check the log file at "/var/log/Xorg.0.log" for additional informati
>>>> on.
>>>>
>>>> info: [drm] nouveau_fifo_free: freeing fifo 1
>>>> error: [drm:pid30722:nouveau_fifo_free] *ERROR* Failed to idle channel 1 before
>>>> destroy.Prepare for strangeness..
>>>> vgapci0: 0x10000000 bytes of rid 0x14 res 3 failed (0, 0xffffffffffffffff).
>>>> error: [drm:pid30722:drm_alloc_resource] *ERROR* Couldn't find resource 0x1
>>>>
>>>> what can i do ?
>>>>
>>>>
>>>>
>>>>
>>>> plain text document attachment (Xorg.0.log)
>>>> This is a pre-release version of the X server from The X.Org Foundation.
>>>> It is not supported in any way.
>>>> Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
>>>> Select the "xorg" product for bugs you find in this release.
>>>> Before reporting bugs in pre-release versions please check the
>>>> latest version in the X.Org Foundation git repository.
>>>> See http://wiki.x.org/wiki/GitPage for git access instructions.
>>>>
>>>> X.Org X Server 1.5.99.902 (1.6.0 RC 2)
>>>> Release Date: 2009-1-30
>>>> X Protocol Version 11, Revision 0
>>>> Build Operating System: FreeBSD 7.1-STABLE amd64 
>>>> Current Operating System: FreeBSD lp.gddsn.org.cn 7.2-PRERELEASE FreeBSD 7.2-PRERELEASE #2: Sun Mar 22 19:44:23 CST 2009     wsk@lp.gddsn.org.cn:/usr/obj/usr/src/sys/WSK amd64
>>>> Build Date: 06 February 2009  04:22:44PM
>>>>  
>>>> 	Before reporting problems, check http://wiki.x.org
>>>> 	to make sure that you have the latest version.
>>>> Markers: (--) probed, (**) from config file, (==) default setting,
>>>> 	(++) from command line, (!!) notice, (II) informational,
>>>> 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>>>> (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 23 09:14:03 2009
>>>> (++) Using config file: "xorg.conf1"
>>>> (==) No Layout section.  Using the first Screen section.
>>>> (==) No screen section available. Using defaults.
>>>> (**) |-->Screen "Default Screen Section" (0)
>>>> (**) |   |-->Monitor "<default monitor>"
>>>> (==) No device specified for screen "Default Screen Section".
>>>> 	Using the first device section listed.
>>>> (**) |   |-->Device "Card0"
>>>> (==) No monitor specified for screen "Default Screen Section".
>>>> 	Using a default monitor configuration.
>>>> (==) Automatically adding devices
>>>> (==) Automatically enabling devices
>>>> (==) No FontPath specified.  Using compiled-in default.
>>>> (==) FontPath set to:
>>>> 	built-ins
>>>> (==) ModulePath set to "/usr/local/lib/xorg/modules"
>>>> (II) Cannot locate a core pointer device.
>>>> (II) Cannot locate a core keyboard device.
>>>> (II) The server relies on HAL to provide the list of input devices.
>>>> 	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
>>>> (II) Loader magic: 0xb20
>>>> (II) Module ABI versions:
>>>> 	X.Org ANSI C Emulation: 0.4
>>>> 	X.Org Video Driver: 5.0
>>>> 	X.Org XInput driver : 4.0
>>>> 	X.Org Server Extension : 2.0
>>>> (II) Loader running on freebsd
>>>> (--) Using syscons driver with X support (version 2.0)
>>>> (--) using VT number 9
>>>>
>>>> (--) PCI:*(0@1:0:0) nVidia Corporation Quadro NVS 140M rev 161, Mem @ 0xfd000000/16777216, 0x00000000/268435456, 0xfa000000/33554432, I/O @ 0x0000df00/128, BIOS @ 0x????????/65536
>>>>     
>>>>         
>>> Ok, thats a new one...
>>>
>>>   
>>>       
>>>> (II) System resource ranges:
>>>> 	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>>>> 	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>>>> 	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>>>> 	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>>>> 	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
>>>> (II) LoadModule: "extmod"
>>>> (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
>>>> (II) Module extmod: vendor="X.Org Foundation"
>>>> 	compiled for 1.5.99.902, module version = 1.0.0
>>>> 	Module class: X.Org Server Extension
>>>> 	ABI class: X.Org Server Extension, version 2.0
>>>> (II) Loading extension MIT-SCREEN-SAVER
>>>> (II) Loading extension XFree86-VidModeExtension
>>>> (II) Loading extension XFree86-DGA
>>>> (II) Loading extension DPMS
>>>> (II) Loading extension XVideo
>>>> (II) Loading extension XVideo-MotionCompensation
>>>> (II) Loading extension X-Resource
>>>> (II) LoadModule: "dbe"
>>>> (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
>>>> (II) Module dbe: vendor="X.Org Foundation"
>>>> 	compiled for 1.5.99.902, module version = 1.0.0
>>>> 	Module class: X.Org Server Extension
>>>> 	ABI class: X.Org Server Extension, version 2.0
>>>> (II) Loading extension DOUBLE-BUFFER
>>>> (II) LoadModule: "glx"
>>>> (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
>>>> (II) Module glx: vendor="X.Org Foundation"
>>>> 	compiled for 1.5.99.902, module version = 1.0.0
>>>> 	ABI class: X.Org Server Extension, version 2.0
>>>> (==) AIGLX disabled
>>>> (==) Exporting typical set of GLX visuals
>>>> (II) Loading extension GLX
>>>> (II) LoadModule: "record"
>>>> (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
>>>> (II) Module record: vendor="X.Org Foundation"
>>>> 	compiled for 1.5.99.902, module version = 1.13.0
>>>> 	Module class: X.Org Server Extension
>>>> 	ABI class: X.Org Server Extension, version 2.0
>>>> (II) Loading extension RECORD
>>>> (II) LoadModule: "dri"
>>>> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
>>>> (II) Module dri: vendor="X.Org Foundation"
>>>> 	compiled for 1.5.99.902, module version = 1.0.0
>>>> 	ABI class: X.Org Server Extension, version 2.0
>>>> (II) Loading extension XFree86-DRI
>>>> (II) LoadModule: "nouveau"
>>>> (II) Loading /usr/local/lib/xorg/modules/drivers//nouveau_drv.so
>>>> (II) Module nouveau: vendor="X.Org Foundation"
>>>> 	compiled for 1.5.99.902, module version = 0.0.10
>>>> 	Module class: X.Org Video Driver
>>>> 	ABI class: X.Org Video Driver, version 5.0
>>>> (II) NOUVEAU driver Date:   Wed Mar 18 09:36:33 2009 +1000
>>>> (II) NOUVEAU driver for NVIDIA chipset families :
>>>> 	RIVA TNT    (NV04)
>>>> 	RIVA TNT2   (NV05)
>>>> 	GeForce 256 (NV10)
>>>> 	GeForce 2   (NV11, NV15)
>>>> 	GeForce 4MX (NV17, NV18)
>>>> 	GeForce 3   (NV20)
>>>> 	GeForce 4Ti (NV25, NV28)
>>>> 	GeForce FX  (NV3x)
>>>> 	GeForce 6   (NV4x)
>>>> 	GeForce 7   (G7x)
>>>> 	GeForce 8   (G8x)
>>>> (II) Primary Device is: PCI 01@00:00:0
>>>> (II) resource ranges after probing:
>>>> 	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>>>> 	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>>>> 	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>>>> 	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>>>> 	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
>>>> (--) NOUVEAU(0): Chipset: "NVIDIA NV86"
>>>>     
>>>>         
>>> Hrm, NV86... I'll have to ask around about that.  Meanwhile can you send
>>> me a pciconf -lvb which should at least show us the BAR configuration.
>>>
>>> Ok, my sources are telling me that this should work and that it is an
>>> NV50, or at least should work the same...
>>>
>>> Also, just to be safe, please rebuild/reinstall devel/libpciaccess.  I'm
>>> not sure if it may be trashing the BARs somehow.
>>>
>>> robert.
>>>   
>>>       
>> bar [24] = type I/O Port, range 32, base 0xeff0, size 16, enabled
>> ichsmb0@pci0:0:31:3: class=0x0c0500 card=0x01fe1028 chip=0x283e8086
>> rev=0x02 hdr=0x00
>> vendor = 'Intel Corporation'
>> device = '82801H (ICH8 Family) SMBus Controller'
>> class = serial bus
>> subclass = SMBus
>> bar [10] = type Memory, range 32, base 0xfebfbf00, size 256, enabled
>> bar [20] = type I/O Port, range 32, base 0x10c0, size 32, enabled
>> vgapci0@pci0:1:0:0: class=0x030000 card=0x01fe1028 chip=0x042910de
>> rev=0xa1 hdr=0x00
>> vendor = 'Nvidia Corp'
>> device = 'Unknown nVidia Quadro FX 570M'
>> class = display
>> subclass = VGA
>> bar [10] = type Memory, range 32, base 0xfd000000, size 16777216, enabled
>>     
>
> Ok, this is BAR 0, BARs 1 and 2 are indeed are not showing up.  BAR 1
> should be your framebuffer and should be where most of your memory is.
> (This is the memory the tell you about when you buy the card, 256M,
> 512M, etc.)  It should probably be a 64bit BAR, which is why BAR 2 isn't
> there.  We are going to need more details on your card...
>   
indeed,my DELL D830 laptop video card is Quadro NVS 140M with 256M memory.
but it recognized Quadro FX 570M with pciconfig.
>   
>> bar [1c] = type Memory, range 64, base 0xfa000000, size 33554432, enabled
>>     
>
> This one is BAR 3, which is used when it doesn't find BAR 1.
>
> robert.
>
>   
>> bar [24] = type I/O Port, range 32, base 0xdf00, size 128, enabled
>> ndis0@pci0:12:0:0: class=0x028000 card=0x000a1028 chip=0x432814e4
>> rev=0x03 hdr=0x00
>> vendor = 'Broadcom Corporation'
>> device = 'BCM94321KFBG Broadcom 4321AGN 802.11a/b/g/draft-n Wi-Fi Solution'
>> class = network
>> bar [10] = type Memory, range 64, base 0xf9ffc000, size 16384, enabled
>> bar [18] = type Prefetchable Memory, range 64, base 0xf0000000, size
>> 1048576, enabled
>> bge0@pci0:9:0:0: class=0x020000 card=0x01fe1028 chip=0x167314e4 rev=0x02
>> hdr=0x00
>> vendor = 'Broadcom Corporation'
>> device = 'B57xx Broadcom NetXtreme Gigabit Ethernet'
>> class = network
>> subclass = ethernet
>> bar [10] = type Memory, range 64, base 0xf9bf0000, size 65536, enabled
>> cbb0@pci0:3:1:0: class=0x060700 card=0x01fe1028 chip=0x71351217 rev=0x21
>> hdr=0x02
>> vendor = 'O2 Micro Inc'
>> device = 'OZ711EZ1 MemoryCardBus Controller'
>> class = bridge
>> subclass = PCI-CardBus
>> bar [10] = type Memory, range 32, base 0xf9a00000, size 4096, enabled
>> fwohci0@pci0:3:1:4: class=0x0c0010 card=0x01fe1028 chip=0x00f71217
>> rev=0x02 hdr=0x00
>> vendor = 'O2 Micro Inc'
>> device = '0x00f71217 1394 Open Host Controller Interface'
>> class = serial bus
>> subclass = FireWire
>> bar [10] = type Memory, range 32, base 0xf9aff000, size 4096, enabled
>> bar [14] = type Memory, range 32, base 0xf9afe800, size 2048, enabled
>>
>> and follow your intrudction.still pain me :(
>>
>> (++) Using config file: "xorg.conf1"
>> drm0: <NVidia Display Adapter> on vgapci0
>> info: [drm] Detected an NV50 generation card (0x086900a2)
>> vgapci0: child drm0 requested pci_enable_busmaster
>> info: [drm] Initialized nouveau 0.0.12 20060213
>> error: [drm:pid6493:drm_alloc_resource] *ERROR* Couldn't find resource 0x2
>> vgapci0: 0x10000000 bytes of rid 0x14 res 3 failed (0, 0xffffffffffffffff).
>> error: [drm:pid6493:drm_alloc_resource] *ERROR* Couldn't find resource 0x1
>> vgapci0: 0x10000000 bytes of rid 0x14 res 3 failed (0, 0xffffffffffffffff).
>> error: [drm:pid6493:drm_alloc_resource] *ERROR* Couldn't find resource 0x1
>> drm0: [ITHREAD]
>> info: [drm] Allocating FIFO number 1
>> error: [drm:pid6494:nouveau_graph_trapped_channel] *ERROR* AIII,
>> invalid/inactiv
>> e channel id 128
>> info: [drm] PGRAPH_ERROR - nSource:info: [drm] PROTECTION_ERRORinfo:
>> [drm] , nSt
>> atus:info: [drm]
>> info: [drm] PGRAPH_ERROR - Ch -1/0 Class 0x0000 Mthd 0x0000 Data
>> 0x00000000:0x00
>> 000000
>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* magic set 1:
>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408900: 0x8000003f
>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408904: 0xcf6f7f0e
>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408908: 0xfff7367f
>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x0040890c: 0x00001850
>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408910: 0xafff3587
>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408e08: 0x800b6fad
>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408e0c: 0x00000000
>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408e10: 0x4df4fd60
>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408e14: 0x000000d7
>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408e18: 0x3139768d
>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408e1c: 0xf6d69757
>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408e20: 0x63161650
>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00408e24: 0x07220009
>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* magic set 2:
>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409900: 0x00000000
>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409904: 0x00000000
>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409908: 0x00000000
>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x0040990c: 0x00000000
>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409910: 0x00000000
>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409e08: 0x00000000
>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409e0c: 0x00000000
>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409e10: 0x00000000
>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409e14: 0x00000000
>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409e18: 0x00000000
>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409e18: 0x00000000
>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409e1c: 0x00000000
>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409e20: 0x00000000
>> error: [drm:pid6494:nv50_pgraph_irq_handler] *ERROR* 0x00409e24: 0x00000000
>> info: [drm] nouveau_fifo_alloc: initialised FIFO 1
>> info: [drm] PFIFO_DMA_PUSHER - Ch 1
>> (EE) NOUVEAU(0): 1296: No valid FB address in PCI config space
>> (EE) Screen(s) found, but none have a usable configuration.
>>
>> Fatal server error:
>> no screens found
>>
>> Please consult the The X.Org Foundation support
>> at http://wiki.x.org
>> for help.
>> Please also check the log file at "/var/log/Xorg.0.log" for additional
>> informati
>> on.
>>
>> info: [drm] nouveau_fifo_free: freeing fifo 1
>> error: [drm:pid6493:nouveau_fifo_free] *ERROR* Failed to idle channel 1
>> before d
>> estroy.Prepare for strangeness..
>> info: [drm] PFIFO_DMA_PUSHER - Ch 127
>> vgapci0: 0x10000000 bytes of rid 0x14 res 3 failed (0, 0xffffffffffffffff).
>> error: [drm:pid6493:drm_alloc_resource] *ERROR* Couldn't find resource 0x1
>>
>>     
>>>   
>>>       
>>>> (II) Loading sub module "int10"
>>>> (II) LoadModule: "int10"
>>>> (II) Loading /usr/local/lib/xorg/modules//libint10.so
>>>> (II) Module int10: vendor="X.Org Foundation"
>>>> 	compiled for 1.5.99.902, module version = 1.0.0
>>>> 	ABI class: X.Org Video Driver, version 5.0
>>>> (II) NOUVEAU(0): Initializing int10
>>>> (==) NOUVEAU(0): Write-combining range (0xa0000,0x20000) was already clear
>>>> (==) NOUVEAU(0): Write-combining range (0xc0000,0x40000) was already clear
>>>> (II) NOUVEAU(0): Primary V_BIOS segment is: 0xc000
>>>> (==) NOUVEAU(0): Write-combining range (0x0,0x1000) was already clear
>>>> drmOpenDevice: node name is /dev/dri/card0
>>>> drmOpenDevice: open result is 10, (OK)
>>>> drmOpenDevice: node name is /dev/dri/card0
>>>> drmOpenDevice: open result is 10, (OK)
>>>> drmOpenByBusid: Searching for BusID pci:0000:01:00.0
>>>> drmOpenDevice: node name is /dev/dri/card0
>>>> drmOpenDevice: open result is 10, (OK)
>>>> drmOpenByBusid: drmOpenMinor returns 10
>>>> drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
>>>> (II) [drm] DRM interface version 1.2
>>>> (II) [drm] DRM open master succeeded.
>>>> (II) NOUVEAU(0): [drm] nouveau interface version: 0.0.12
>>>> (--) NOUVEAU(0): [drm] kernel modesetting not available
>>>> (--) NOUVEAU(0): VESA-HACK: Console VGA mode is 0x3
>>>> (II) NOUVEAU(0): Creating default Display subsection in Screen section
>>>> 	"Default Screen Section" for depth/fbbpp 24/32
>>>> (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
>>>> (==) NOUVEAU(0): RGB weight 888
>>>> (==) NOUVEAU(0): Default visual is TrueColor
>>>> (II) Loading sub module "vgahw"
>>>> (II) LoadModule: "vgahw"
>>>> (II) Loading /usr/local/lib/xorg/modules//libvgahw.so
>>>> (II) Module vgahw: vendor="X.Org Foundation"
>>>> 	compiled for 1.5.99.902, module version = 0.1.0
>>>> 	ABI class: X.Org Video Driver, version 5.0
>>>> (==) NOUVEAU(0): Randr1.2 support enabled
>>>> (==) NOUVEAU(0): Using HW cursor
>>>> (EE) NOUVEAU(0): 1296: No valid FB address in PCI config space
>>>> (==) NOUVEAU(0): Write-combining range (0x0,0x1000) was already clear
>>>> (II) UnloadModule: "nouveau"
>>>> (II) UnloadModule: "vgahw"
>>>> (II) Unloading /usr/local/lib/xorg/modules//libvgahw.so
>>>> (II) UnloadModule: "int10"
>>>> (II) Unloading /usr/local/lib/xorg/modules//libint10.so
>>>> (EE) Screen(s) found, but none have a usable configuration.
>>>>
>>>> Fatal server error:
>>>> no screens found
>>>>
>>>> Please consult the The X.Org Foundation support 
>>>> 	 at http://wiki.x.org
>>>>  for help. 
>>>> Please also check the log file at "/var/log/Xorg.0.log" for additional information.
>>>>
>>>>     
>>>>         




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?49C97EEB.4090607>