Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 2 Mar 2003 14:56:43 -0600
From:      Wayne <wayne@etaq.com>
To:        questions@freebsd.org
Cc:        current@freebsd.org
Subject:   can't sshd into box
Message-ID:  <20030302145643.A26191@etaq.com>

next in thread | raw e-mail | index | archive | help
Dear FreeBSD,

    I have installed 5.0 into a new Dell.  I have not set up anything
special yet (no firewall, no natd, etc.).

    I can ssh out to the world, but I can't get into the new box from the
gateway FreeBSD box on the same home network.  The gateway box properly
lists the new box in /etc/hosts.  Each box can ping the other by name
and by ip.

    I have tried the OpenSSH that came with the system, and I
installed ssh-3.0 , and the result is the same.  sshd is running
on the new box.  

    I enabled telnet in inetd.conf, and I get rejected, also.

    Is there a new default connecton protection that I must turn off, or
something?  [/etc/hosts.allow  is the default setting, I see no answer
there.]

              - Wayne

--------- example screen output below.  The new box is etaq3  ------

wayne@etaq:/home/wayne>ssh etaq3
ssh_exchange_identification: read: Connection reset by peer

wayne@etaq:/home/wayne>telnet etaq3
Trying 192.168.0.12...
Connected to etaq3.etaq.com.
Escape character is '^]'.
Connection closed by foreign host.

wayne@etaq:/home/wayne>ping etaq3
PING etaq3.etaq.com (192.168.0.12): 56 data bytes
64 bytes from 192.168.0.12: icmp_seq=0 ttl=64 time=0.402 ms
64 bytes from 192.168.0.12: icmp_seq=1 ttl=64 time=0.618 ms
64 bytes from 192.168.0.12: icmp_seq=2 ttl=64 time=0.344 ms

-- 
Wayne M Barnes
wayne@etaq.com

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030302145643.A26191>