Date: Sun, 09 Dec 2001 10:28:45 -0800 From: Joseph Maxwell <jaymax@ns.net> To: questions@FreeBSD.ORG Subject: HELP!! Runaway /var/log/mgetty.cuaa1 log file Message-ID: <3C13AD59.28E8AC3B@ns.net>
next in thread | raw e-mail | index | archive | help
Hello,
I have a runaway log file w/ approx. 576 line repeat, ~43 Kb per min.
One cycle is given below. Seems to be modem related ????? but there is
no modem in the system and no ref. in /etc/rc.conf /etc/defaults/rc.conf
How can this be corrected? or at least contained? other than by frequent
log rotations.
Running FreeBSD O/S v 4.2
on a 486 - 2DX platform config w/
Thanks
-- Joe --
dmesg output
o FreeBSD 4.2-RELEASE #0: Mon Nov 20 13:02:55 GMT 2000
o jkh@bento.FreeBSD.org:/usr/src/sys/compile/GENERIC
o Timecounter "i8254" frequency 1193182 Hz
o CPU: i486 DX2 (486-class CPU)
o Origin = "GenuineIntel" Id = 0x435 Stepping = 5
o Features=0x3<FPU,VME>
o real memory = 20971520 (20480K bytes)
o config> di sn0
o config> di lnc0
o config> di ie0
o config> di fe0
o config> di cs0
o config> q
o avail memory = 16314368 (15932K bytes)
o Preloaded elf kernel "kernel" at 0xc0436000.
o Preloaded userconfig_script "/boot/kernel.conf" at 0xc043609c.
o md0: Malloc disk
o npx0: <math processor> on motherboard
o npx0: INT 16 interface
o isa0: <ISA bus> on motherboard
o fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2
on isa0
o fd0: <1440-KB 3.5" drive> on fdc0 drive 0
o ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
o ata1 at port 0x170-0x177,0x376 irq 15 on isa0
o atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on
isa0
o atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
o kbd0 at atkbd0
o vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
o sc0: <System console> at flags 0x100 on isa0
o sc0: VGA <16 virtual consoles, flags=0x300>
o sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
o sio0: type 16450
o sio1 at port 0x2f8-0x2ff irq 3 on isa0
o sio1: type 16450
o ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
o ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
o plip0: <PLIP network interface> on ppbus0
o lpt0: <Printer> on ppbus0
o lpt0: Interrupt-driven port
o ppi0: <Parallel I/O> on ppbus0
o ed0 at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
o ed0: address 00:40:05:a0:40:18, type NE2000 (16 bit)
o ad0: 2442MB <Maxtor 82560A4> [4962/16/63] at ata0-master
BIOSPIO
o ad1: 521MB <Maxtor 7546 AT> [1060/16/63] at ata0-slave BIOSPIO
o acd0: CDROM <CD-ROM Drive/G6D> at ata1-master using BIOSPIO
o Mounting root from ufs:/dev/ad0s1a
o ed0: promiscuous mode enabled
o pid 249 (man), uid 9 on /usr: file system full
o cd9660: Joliet Extension
------------------------------------------------------------------------------------------------------------
Log file output:
12/08 06:33:42 aa1 mgetty: experimental test release 1.1.22-Aug17
12/08 06:33:42 aa1 something foul in config line: '*** Configuring for
port cuaa1 ***'
12/08 06:33:42 aa1 (keyword '***' not found)
12/08 06:33:42 aa1 something foul in config line: '- `debug (mgetty)''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'This sets the amount
of logging `mgetty' will do. A good value is'
12/08 06:33:42 aa1 (keyword 'This' not found)
12/08 06:33:42 aa1 something foul in config line: '4, more details are
seen with `5', and `9' is really noisy. Try'
12/08 06:33:42 aa1 (keyword '4,' not found)
12/08 06:33:42 aa1 something foul in config line: 'it! The log data is
written to the file `/tmp/log_mg.cuaxx'.: [4]'
12/08 06:33:42 aa1 (keyword 'it!' not found)
12/08 06:33:42 aa1 something foul in config line: '- `fax-id''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'This sets the fax
station ID used in fax mode to identify your'
12/08 06:33:42 aa1 (keyword 'This' not found)
12/08 06:33:42 aa1 something foul in config line: 'site to the caller
(usually this is simply your fax phone number).'
12/08 06:33:42 aa1 (keyword 'site' not found)
12/08 06:33:42 aa1 something foul in config line: ': [00 00 000000]'
12/08 06:33:42 aa1 (keyword ':' not found)
12/08 06:33:42 aa1 something foul in config line: '- `speed''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'Specify, as integer
value, the port speed to use. Default is'
12/08 06:33:42 aa1 (keyword 'Specify,' not found)
12/08 06:33:42 aa1 something foul in config line: '38400. If the given
speed is not valid, `mgetty' complains loudly'
12/08 06:33:42 aa1 (keyword '38400.' not found)
12/08 06:33:42 aa1 something foul in config line: 'and exits.: [38400]'
12/08 06:33:42 aa1 (keyword 'and' not found)
12/08 06:33:42 aa1 something foul in config line: '- `switchbd''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'Some modems, mainly
Rockwell chipsets, switch to 19200 bps when'
12/08 06:33:42 aa1 (keyword 'Some' not found)
12/08 06:33:42 aa1 something foul in config line: 'entering fax mode.
Others may need other speed switches (but I'
12/08 06:33:42 aa1 (keyword 'entering' not found)
12/08 06:33:42 aa1 something foul in config line: 'know none). If your
modem is Rockwell based, try `switchbd 19200''
12/08 06:33:42 aa1 (keyword 'know' not found)
12/08 06:33:42 aa1 something foul in config line: 'if fax reception
doesn't work. (*Warning:* if this is set wrongly,'
12/08 06:33:42 aa1 (keyword 'if' not found)
12/08 06:33:42 aa1 something foul in config line: 'fax reception will
definitely fail. For most sane modems, you do'
12/08 06:33:42 aa1 (keyword 'fax' not found)
12/08 06:33:42 aa1 something foul in config line: '*not need* this.).
Set speed or `0':'
12/08 06:33:42 aa1 (keyword '*not' not found)
12/08 06:33:42 aa1 something foul in config line: '- `direct''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'Tells mgetty that it
is running on a direct line. Mgetty won't try'
12/08 06:33:42 aa1 (keyword 'Tells' not found)
12/08 06:33:42 aa1 something foul in config line: 'to initialize any
modem, nor will it wait for `RING'. It will just'
12/08 06:33:42 aa1 (keyword 'to' not found)
12/08 06:33:42 aa1 something foul in config line: 'wait for any
character, and then output the issue file and login'
12/08 06:33:42 aa1 (keyword 'wait' not found)
12/08 06:33:42 aa1 something foul in config line: 'prompt. This option
is used if you want to connect to machines via'
12/08 06:33:42 aa1 (keyword 'prompt.' not found)
12/08 06:33:42 aa1 something foul in config line: 'nullmodem cable.:
[NO]'
12/08 06:33:42 aa1 (keyword 'nullmodem' not found)
12/08 06:33:42 aa1 something foul in config line: '- `blocking''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'Tells mgetty to open
the device in `blocking' mode, that is, the'
12/08 06:33:42 aa1 (keyword 'Tells' not found)
12/08 06:33:42 aa1 something foul in config line: '`open()' system call
won't succeed until carrier detect is set.'
12/08 06:33:42 aa1 (keyword '`open()'' not found)
12/08 06:33:42 aa1 something foul in config line: 'This is set if
`mgetty' is called as `getty'. I'm not sure whether'
12/08 06:33:42 aa1 (keyword 'This' not found)
12/08 06:33:42 aa1 something foul in config line: 'it's very useful,
but I include it for completeness: [NO]'
12/08 06:33:42 aa1 (keyword 'it's' not found)
12/08 06:33:42 aa1 something foul in config line: '- `port-owner''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'If set, mgetty will
`chown' the tty line to the given username (you'
12/08 06:33:42 aa1 (keyword 'If' not found)
12/08 06:33:42 aa1 something foul in config line: 'can specify a string
or an integer uid, but the integer must be'
12/08 06:33:42 aa1 (keyword 'can' not found)
12/08 06:33:42 aa1 something foul in config line: 'valid). This is
highly recommended for security purposes: only'
12/08 06:33:42 aa1 (keyword 'valid).' not found)
12/08 06:33:42 aa1 something foul in config line: 'give port access to
those users you trust not to misuse your modem'
12/08 06:33:42 aa1 (keyword 'give' not found)
12/08 06:33:42 aa1 something foul in config line: 'lines!: [uucp]'
12/08 06:33:42 aa1 (keyword 'lines!:' not found)
12/08 06:33:42 aa1 something foul in config line: '- `port-group''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'If set, mgetty will
`chgrp' the tty line to this group id (which'
12/08 06:33:42 aa1 (keyword 'If' not found)
12/08 06:33:42 aa1 something foul in config line: 'can be given as
group name, or as integer gid). If it's not given,'
12/08 06:33:42 aa1 (keyword 'can' not found)
12/08 06:33:42 aa1 something foul in config line: 'or not valid, the
primary group id of `port-owner''
12/08 06:33:42 aa1 (keyword 'or' not found)
12/08 06:33:42 aa1 something foul in config line: 'will be used.:
[uucp]'
12/08 06:33:42 aa1 (keyword 'will' not found)
12/08 06:33:42 aa1 something foul in config line: '- `port-mode''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'Specifies the
permissions to `chmod' the device to.'
12/08 06:33:42 aa1 (keyword 'Specifies' not found)
12/08 06:33:42 aa1 something foul in config line: '*Never* make a modem
device world-accessible, better use `0660''
12/08 06:33:42 aa1 (keyword '*Never*' not found)
12/08 06:33:42 aa1 something foul in config line: 'or even `0600'.:
[0660]'
12/08 06:33:42 aa1 (keyword 'or' not found)
12/08 06:33:42 aa1 something foul in config line: '- `toggle-dtr''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'Tells mgetty whether
it should lower the DTR line upon startup to'
12/08 06:33:42 aa1 (keyword 'Tells' not found)
12/08 06:33:42 aa1 something foul in config line: 'reset modem. Default
is `yes', but some (few) modems react'
12/08 06:33:42 aa1 (keyword 'reset' not found)
12/08 06:33:42 aa1 something foul in config line: 'allergic to that and
crash.: [YES]'
12/08 06:33:42 aa1 (keyword 'allergic' not found)
12/08 06:33:42 aa1 something foul in config line: '-
`toggle-dtr-waittime''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'Specifies the time
(in ms) to hold the DTR line low.: [500]'
12/08 06:33:42 aa1 (keyword 'Specifies' not found)
12/08 06:33:42 aa1 something foul in config line: '- `data-only''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'Tells `mgetty' to
forget about faxing and only use the data part of'
12/08 06:33:42 aa1 (keyword 'Tells' not found)
12/08 06:33:42 aa1 something foul in config line: 'the modem. Default
is `false'. You need this if your modem can't'
12/08 06:33:42 aa1 (keyword 'the' not found)
12/08 06:33:42 aa1 something foul in config line: 'distinguish incoming
fax and data calls.: [NO]'
12/08 06:33:42 aa1 (keyword 'distinguish' not found)
12/08 06:33:42 aa1 something foul in config line: '- `fax-only''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'Tells `mgetty' to
put the modem in fax-only mode. You need this if'
12/08 06:33:42 aa1 (keyword 'Tells' not found)
12/08 06:33:42 aa1 something foul in config line: 'your modem can't
distinguish incoming fax and data calls, but you'
12/08 06:33:42 aa1 (keyword 'your' not found)
12/08 06:33:42 aa1 something foul in config line: 'need fax more
important than data; and you need it if you want to'
12/08 06:33:42 aa1 (keyword 'need' not found)
12/08 06:33:42 aa1 something foul in config line: 'disable data calls
for security reasons (this could be achieved'
12/08 06:33:42 aa1 (keyword 'disable' not found)
12/08 06:33:42 aa1 something foul in config line: 'via `login.config'
as well): [NO]'
12/08 06:33:42 aa1 (keyword 'via' not found)
12/08 06:33:42 aa1 something foul in config line: '- `modem-type''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'Specifies the kind
of modem connected to the port. Valid options are:'
12/08 06:33:42 aa1 (keyword 'Specifies' not found)
12/08 06:33:42 aa1 something foul in config line: '* auto'
12/08 06:33:42 aa1 (keyword '*' not found)
12/08 06:33:42 aa1 something foul in config line: 'Mgetty will detect
the modem type itself (which may occasionally'
12/08 06:33:42 aa1 (keyword 'Mgetty' not found)
12/08 06:33:42 aa1 something foul in config line: 'be not desirable, or
it may fail on old modem equipment).'
12/08 06:33:42 aa1 (keyword 'be' not found)
12/08 06:33:42 aa1 something foul in config line: '* c2.0'
12/08 06:33:42 aa1 (keyword '*' not found)
12/08 06:33:42 aa1 something foul in config line: 'Modem is a CLASS 2.0
fax mode. Works better than class 2, if'
12/08 06:33:42 aa1 (keyword 'Modem' not found)
12/08 06:33:42 aa1 something foul in config line: 'both are available,
because its better standardized. Known to'
12/08 06:33:42 aa1 (keyword 'both' not found)
12/08 06:33:42 aa1 something foul in config line: 'work with USR and
ZyXEL.'
12/08 06:33:42 aa1 (keyword 'work' not found)
12/08 06:33:42 aa1 something foul in config line: '* cls2'
12/08 06:33:42 aa1 (keyword '*' not found)
12/08 06:33:42 aa1 something foul in config line: 'Modem is a CLASS 2
fax modem, mgetty will not try class 2.0.'
12/08 06:33:42 aa1 (keyword 'Modem' not found)
12/08 06:33:42 aa1 something foul in config line: '* data'
12/08 06:33:42 aa1 (keyword '*' not found)
12/08 06:33:42 aa1 something foul in config line: 'Do not try fax
initialization'
12/08 06:33:42 aa1 (keyword 'Do' not found)
12/08 06:33:42 aa1 something foul in config line: 'There is no way
(yet) to tell mgetty to use *only* fax mode and'
12/08 06:33:42 aa1 (keyword 'There' not found)
12/08 06:33:42 aa1 something foul in config line: 'refuse data calls
with this option, use the `fax-only true''
12/08 06:33:42 aa1 (keyword 'refuse' not found)
12/08 06:33:42 aa1 something foul in config line: 'statement for that.:
[auto]'
12/08 06:33:42 aa1 (keyword 'statement' not found)
12/08 06:33:42 aa1 something foul in config line: '- `init-chat''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'Tells mgetty the
chat sequence to use for initializing the modem.'
12/08 06:33:42 aa1 (keyword 'Tells' not found)
12/08 06:33:42 aa1 something foul in config line: '*Warning*: the
sequence starts with *expect*, which will in most'
12/08 06:33:42 aa1 (keyword '*Warning*:' not found)
12/08 06:33:42 aa1 something foul in config line: 'cases be `""'
(nothing). This ordering was chosen because UUCP'
12/08 06:33:42 aa1 (keyword 'cases' not found)
12/08 06:33:42 aa1 something foul in config line: 'does it this way,
and I wanted to avoid confusion here.'
12/08 06:33:42 aa1 (keyword 'does' not found)
12/08 06:33:42 aa1 something foul in config line: 'Example: '
12/08 06:33:42 aa1 (keyword 'Example:' not found)
12/08 06:33:42 aa1 something foul in config line: '""
\d\d\d+++\d\d\dATQ0E1V1H0 OK ATL0M0S0=0 OK AT&K3 OK'
12/08 06:33:42 aa1 (keyword '""' not found)
12/08 06:33:42 aa1 something foul in config line: 'init sequence: [""
ATS0=0Q0&D3&C1 OK]'
12/08 06:33:42 aa1 (keyword 'init' not found)
12/08 06:33:42 aa1 something foul in config line: '- `force-init-chat''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'In some cases, the
modem can get stuck in a mode where it won't'
12/08 06:33:42 aa1 (keyword 'In' not found)
12/08 06:33:42 aa1 something foul in config line: 'react to a simple
`AT' command. Usually this happens because the'
12/08 06:33:42 aa1 (keyword 'react' not found)
12/08 06:33:42 aa1 something foul in config line: 'modem is set to
ignore a DTR drop and still has a data connection'
12/08 06:33:42 aa1 (keyword 'modem' not found)
12/08 06:33:42 aa1 something foul in config line: 'to the other side.
If you use a voice modem, it could be stuck in'
12/08 06:33:42 aa1 (keyword 'to' not found)
12/08 06:33:42 aa1 something foul in config line: 'voice mode.'
12/08 06:33:42 aa1 (keyword 'voice' not found)
12/08 06:33:42 aa1 something foul in config line: 'In these situations,
the normal `init-chat' will time out, because'
12/08 06:33:42 aa1 (keyword 'In' not found)
12/08 06:33:42 aa1 something foul in config line: 'the modem won't send
the proper responses back.'
12/08 06:33:42 aa1 (keyword 'the' not found)
12/08 06:33:42 aa1 something foul in config line: 'To get the modem
back into a sane state, you can use the'
12/08 06:33:42 aa1 (keyword 'To' not found)
12/08 06:33:42 aa1 something foul in config line: '`force-init-chat'
chat sequence. The default setup will send the'
12/08 06:33:42 aa1 (keyword '`force-init-chat'' not found)
12/08 06:33:42 aa1 something foul in config line: 'DLE ETX characters,
to get voice modems back to life, and then the'
12/08 06:33:42 aa1 (keyword 'DLE' not found)
12/08 06:33:42 aa1 something foul in config line:
'`(pause)+++(pause)ATH0' sequence to get the modem back from data'
12/08 06:33:42 aa1 (keyword '`(pause)+++(pause)ATH0'' not found)
12/08 06:33:42 aa1 something foul in config line: 'mode to command
mode.'
12/08 06:33:42 aa1 (keyword 'mode' not found)
12/08 06:33:42 aa1 something foul in config line: 'You could prepend
this sequence to `init-chat' (it wouldn't harm),'
12/08 06:33:42 aa1 (keyword 'You' not found)
12/08 06:33:42 aa1 something foul in config line: 'but especially the
pauses around the +++ sequence makes this'
12/08 06:33:42 aa1 (keyword 'but' not found)
12/08 06:33:42 aa1 something foul in config line: 'undesirable slow.:'
12/08 06:33:42 aa1 (keyword 'undesirable' not found)
12/08 06:33:42 aa1 something foul in config line: '-
`modem-check-time''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'Some modems have the
nasty tendency to crash silently. With this'
12/08 06:33:42 aa1 (keyword 'Some' not found)
12/08 06:33:42 aa1 something foul in config line: 'option, you tell
`mgetty' to check every SECONDS seconds with a'
12/08 06:33:42 aa1 (keyword 'option,' not found)
12/08 06:33:42 aa1 something foul in config line: 'simple `AT...OK'
sequence whether the modem still reacts. If not,'
12/08 06:33:42 aa1 (keyword 'simple' not found)
12/08 06:33:42 aa1 something foul in config line: '`mgetty' will
restart itself and do a full modem reset.: [3600]'
12/08 06:33:42 aa1 (keyword '`mgetty'' not found)
12/08 06:33:42 aa1 something foul in config line: '- `rings''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'Sets the number of
`RING' messages to wait for, before mgetty'
12/08 06:33:42 aa1 (keyword 'Sets' not found)
12/08 06:33:42 aa1 something foul in config line: 'picks up the phone.
*Warning:* if your modem auto-answers, for'
12/08 06:33:42 aa1 (keyword 'picks' not found)
12/08 06:33:42 aa1 something foul in config line: 'whatever reason, set
this to something *different* than the'
12/08 06:33:42 aa1 (keyword 'whatever' not found)
12/08 06:33:42 aa1 something foul in config line: 'value set with
`ATS0=mmm', otherwise the modems autoanswer and'
12/08 06:33:42 aa1 (keyword 'value' not found)
12/08 06:33:42 aa1 something foul in config line: 'mgettys manual
answer will collide (most modems hang up if a'
12/08 06:33:42 aa1 (keyword 'mgettys' not found)
12/08 06:33:42 aa1 something foul in config line: 'command is received
during auto-answer): [1]'
12/08 06:33:42 aa1 (keyword 'command' not found)
12/08 06:33:42 aa1 something foul in config line: '- `answer-chat''
12/08 06:33:42 aa1 (keyword '-' not found)
12/08 06:33:42 aa1 something foul in config line: 'This is the command
sequence that is used to answer a phone call.'
12/08 06:33:42 aa1 (keyword 'This' not found)
12/08 06:33:42 aa1 something foul in config line: 'Usually you can
leave it at the default ` "" ATA CONNECT \c \r ','
12/08 06:33:42 aa1 (keyword 'Usually' not found)
12/08 06:33:42 aa1 something foul in config line: 'but for some modems
you need `ATS0=1' in place of `ATA' (ATA not'
12/08 06:33:43 aa1 (keyword 'but' not found)
12/08 06:33:43 aa1 something foul in config line: 'allowed). The extra
`\r' expect string is needed that the code can'
12/08 06:33:43 aa1 (keyword 'allowed).' not found)
12/08 06:33:43 aa1 something foul in config line: 'grab the full
CONNECT XYZ\R string. It will work without the \r,'
12/08 06:33:43 aa1 (keyword 'grab' not found)
12/08 06:33:43 aa1 something foul in config line: 'but then the logging
information will be less detailed. *Right now,'
12/08 06:33:43 aa1 (keyword 'but' not found)
12/08 06:33:43 aa1 something foul in config line: '\r won't work at
all, it's not implemented yet. Don't use it.*'
12/08 06:33:43 aa1 (keyword '\r' not found)
12/08 06:33:43 aa1 something foul in config line: ': ["" ATA CONNECT \c
\r]'
12/08 06:33:43 aa1 (keyword ':' not found)
12/08 06:33:43 aa1 something foul in config line: '-
`answer-chat-timeout''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'During the
ANSWER-CHAT, each "expect" string must be seen in the'
12/08 06:33:43 aa1 (keyword 'During' not found)
12/08 06:33:43 aa1 something foul in config line: 'time specified here.
Default is 80 seconds. This time should be at'
12/08 06:33:43 aa1 (keyword 'time' not found)
12/08 06:33:43 aa1 something foul in config line: 'least some 5 seconds
longer than the time set with the `ATS7=...''
12/08 06:33:43 aa1 (keyword 'least' not found)
12/08 06:33:43 aa1 something foul in config line: 'modem setup
command.: [80]'
12/08 06:33:43 aa1 (keyword 'modem' not found)
12/08 06:33:43 aa1 something foul in config line: '- `autobauding''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'Some modems switch
their DTE line speed to the communication line'
12/08 06:33:43 aa1 (keyword 'Some' not found)
12/08 06:33:43 aa1 something foul in config line: 'speed after
connecting, e.g., after sending `CONNECT 2400', the'
12/08 06:33:43 aa1 (most likely syntax error)
12/08 06:33:43 aa1 something foul in config line: 'modem switches to
2400 bps. Newer modems usually have a switch to'
12/08 06:33:43 aa1 (keyword 'modem' not found)
12/08 06:33:43 aa1 something foul in config line: '"lock" a DTE baud
rate, which is strongly recommended. If your'
12/08 06:33:43 aa1 (keyword '"lock"' not found)
12/08 06:33:43 aa1 something foul in config line: 'modem insists on
doing this speed switch, setting `autobauding' to'
12/08 06:33:43 aa1 (keyword 'modem' not found)
12/08 06:33:43 aa1 something foul in config line: 'YES will make mgetty
behave accordingly.: [NO]'
12/08 06:33:43 aa1 (keyword 'YES' not found)
12/08 06:33:43 aa1 something foul in config line: '- `ringback''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'If you have to put
your modem and your telephone on the same phone'
12/08 06:33:43 aa1 (keyword 'If' not found)
12/08 06:33:43 aa1 something foul in config line: 'line, you can switch
on "ringback" or "ring-twice". This means,'
12/08 06:33:43 aa1 (keyword 'line,' not found)
12/08 06:33:43 aa1 something foul in config line: 'mgetty won't answer
the phone on the first call, but remember the'
12/08 06:33:43 aa1 (keyword 'mgetty' not found)
12/08 06:33:43 aa1 something foul in config line: 'call, and pick up on
the second call (if it comes in the time'
12/08 06:33:43 aa1 (keyword 'call,' not found)
12/08 06:33:43 aa1 something foul in config line: 'specified by
`ringback-time').: [NO]'
12/08 06:33:43 aa1 (keyword 'specified' not found)
12/08 06:33:43 aa1 something foul in config line: '- `ringback-time''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'This setting
specifies how much time may pass between the first'
12/08 06:33:43 aa1 (keyword 'This' not found)
12/08 06:33:43 aa1 something foul in config line: 'and the second call
if "ringback" is active.: [30]'
12/08 06:33:43 aa1 (keyword 'and' not found)
12/08 06:33:43 aa1 something foul in config line: '- `ignore-carrier''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'If your Modem does
not assert the DCD (carrier detect) line, or the'
12/08 06:33:43 aa1 (keyword 'If' not found)
12/08 06:33:43 aa1 something foul in config line: 'serial port or cable
or serial driver is broken, it is possible'
12/08 06:33:43 aa1 (keyword 'serial' not found)
12/08 06:33:43 aa1 something foul in config line: 'that `mgetty' or
`login' will block after a successful CONNECT'
12/08 06:33:43 aa1 (keyword 'that' not found)
12/08 06:33:43 aa1 something foul in config line: '(that means:
everything seems to work, but suddenly nothing is sent'
12/08 06:33:43 aa1 (keyword '(that' not found)
12/08 06:33:43 aa1 something foul in config line: 'to the port anymore.
Depending on the operating system used, this'
12/08 06:33:43 aa1 (keyword 'to' not found)
12/08 06:33:43 aa1 something foul in config line: 'can be before
printing the `/etc/issue' file or not before printing'
12/08 06:33:43 aa1 (keyword 'can' not found)
12/08 06:33:43 aa1 something foul in config line: 'the `password:'
prompt.'
12/08 06:33:43 aa1 (keyword 'the' not found)
12/08 06:33:43 aa1 something foul in config line: 'To work around this,
you can switch off the carrier detection in'
12/08 06:33:43 aa1 (keyword 'To' not found)
12/08 06:33:43 aa1 something foul in config line: 'software: set
`ignore-carrier true'. Default is `false'.'
12/08 06:33:43 aa1 (keyword 'software:' not found)
12/08 06:33:43 aa1 something foul in config line: '*WARNING:* If you
use this, your system won't be able to detect'
12/08 06:33:43 aa1 (keyword '*WARNING:*' not found)
12/08 06:33:43 aa1 something foul in config line: 'when a caller just
hangs up instead of cleanly logging out. This'
12/08 06:33:43 aa1 (keyword 'when' not found)
12/08 06:33:43 aa1 something foul in config line: 'may result in
hanging modems, etc.: [false]'
12/08 06:33:43 aa1 (keyword 'may' not found)
12/08 06:33:43 aa1 something foul in config line: '- `issue-file''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'This is the file
printed before the login prompt.: [/etc/issue]'
12/08 06:33:43 aa1 (keyword 'This' not found)
12/08 06:33:43 aa1 something foul in config line: '- `prompt-waittime''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'This specifies how
long `mgetty' will wait for modem and line to'
12/08 06:33:43 aa1 (keyword 'This' not found)
12/08 06:33:43 aa1 something foul in config line: 'settle down (in ms)
before printing issue file and login prompt: [500]'
12/08 06:33:43 aa1 (keyword 'settle' not found)
12/08 06:33:43 aa1 something foul in config line: '- `login-prompt''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'This specifies the
login prompt that mgetty will output. Some'
12/08 06:33:43 aa1 (keyword 'This' not found)
12/08 06:33:43 aa1 something foul in config line: 'special characters
in this string (and in the issue file, btw) are'
12/08 06:33:43 aa1 (keyword 'special' not found)
12/08 06:33:43 aa1 something foul in config line: 'recognized and
replaced by something else:'
12/08 06:33:43 aa1 (keyword 'recognized' not found)
12/08 06:33:43 aa1 something foul in config line: '* @ system name'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: '* \n newline'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: '* \r carriage
return'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: '* \g bell'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: '* \b backspace
(ascii 010)'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: '* \f form feed
(ascii 013)'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: '* \t TAB'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: '* \P (and \L) port
name (e.g. ttyS0)'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: '* \C date and time,
in "ctime()" format'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: '* \I Connection
string (e.g. 2400/REL)'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: '* \N (and \U) number
of users currently logged in'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: '* \S Port speed
(e.g. 38400)'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: '* \D current date in
dd/mm/yy format'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: '* \T current time in
hh:mm:ss format'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: '* \DIGIT character
with the specified octal code'
12/08 06:33:43 aa1 (keyword '*' not found)
12/08 06:33:43 aa1 something foul in config line: 'The maximum lenght
of the login prompt is limited to 140'
12/08 06:33:43 aa1 (keyword 'The' not found)
12/08 06:33:43 aa1 something foul in config line: 'characters (after
expansion).: [@!login: ]'
12/08 06:33:43 aa1 (keyword 'characters' not found)
12/08 06:33:43 aa1 something foul in config line: '- `login-time''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'This specifies the
maximum time the user can take to log in. If no'
12/08 06:33:43 aa1 (keyword 'This' not found)
12/08 06:33:43 aa1 something foul in config line: 'login has occured
after that time, `mgetty' will hang up.: [240]'
12/08 06:33:43 aa1 (keyword 'login' not found)
12/08 06:33:43 aa1 something foul in config line: '- `fax-server-file''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'Specifies the fax
file(s) that is to be sent if someone else calls'
12/08 06:33:43 aa1 (keyword 'Specifies' not found)
12/08 06:33:43 aa1 something foul in config line: 'your modem in *fax
polling mode*, that is, the caller *receives* a'
12/08 06:33:43 aa1 (keyword 'your' not found)
12/08 06:33:43 aa1 something foul in config line: 'document. '
12/08 06:33:43 aa1 (keyword 'document.' not found)
12/08 06:33:43 aa1 something foul in config line: 'Normally, the file
given is a text file, containing the list of G3'
12/08 06:33:43 aa1 (keyword 'Normally,' not found)
12/08 06:33:43 aa1 something foul in config line: 'files to send to the
calling machine, one file per line. Comment'
12/08 06:33:43 aa1 (keyword 'files' not found)
12/08 06:33:43 aa1 something foul in config line: 'lines (starting with
"#") are ignored. For backward compatibility,'
12/08 06:33:43 aa1 (keyword 'lines' not found)
12/08 06:33:43 aa1 something foul in config line: '`mgetty' does check
whether the named file is a G3 file itself, in'
12/08 06:33:43 aa1 (keyword '`mgetty'' not found)
12/08 06:33:43 aa1 something foul in config line: 'which case this file
is sent directly (but then, you can only send'
12/08 06:33:43 aa1 (keyword 'which' not found)
12/08 06:33:43 aa1 something foul in config line: 'one page).'
12/08 06:33:43 aa1 (keyword 'one' not found)
12/08 06:33:43 aa1 something foul in config line: 'Not all modems
support fax poll *server* mode, I know that the'
12/08 06:33:43 aa1 (keyword 'Not' not found)
12/08 06:33:43 aa1 something foul in config line: 'ZyXEL and MultiTech
do.:'
12/08 06:33:43 aa1 (keyword 'ZyXEL' not found)
12/08 06:33:43 aa1 something foul in config line: '- `diskspace''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'This setting tells
mgetty the minimum amount of disk space (in KB) that'
12/08 06:33:43 aa1 (keyword 'This' not found)
12/08 06:33:43 aa1 something foul in config line: 'has to be available
in the fax spool directory for fax reception'
12/08 06:33:43 aa1 (keyword 'has' not found)
12/08 06:33:43 aa1 something foul in config line: 'to be allowed.:
[1024]'
12/08 06:33:43 aa1 (keyword 'to' not found)
12/08 06:33:43 aa1 something foul in config line: '- `notify''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'This is the address
that will get mails if a fax is received. Not'
12/08 06:33:43 aa1 (keyword 'This' not found)
12/08 06:33:43 aa1 something foul in config line: 'fully tested.:
[faxadmin]'
12/08 06:33:43 aa1 (keyword 'fully' not found)
12/08 06:33:43 aa1 something foul in config line: '- `fax-owner''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'If set, mgetty will
`chown' the received files to the given username'
12/08 06:33:43 aa1 (keyword 'If' not found)
12/08 06:33:43 aa1 something foul in config line: '(you can specify a
string or an integer uid, but the integer must be'
12/08 06:33:43 aa1 (keyword '(you' not found)
12/08 06:33:43 aa1 something foul in config line: 'valid).: [uucp]'
12/08 06:33:43 aa1 (keyword 'valid).:' not found)
12/08 06:33:43 aa1 something foul in config line: '- `fax-group''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'If set, mgetty will
`chgrp' the received files to this group id'
12/08 06:33:43 aa1 (keyword 'If' not found)
12/08 06:33:43 aa1 something foul in config line: '(which can be given
as group name, or as integer gid).: [modem]'
12/08 06:33:43 aa1 (keyword '(which' not found)
12/08 06:33:43 aa1 something foul in config line: '- `fax-mode''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'Specifies the
permissions to `chmod' the received files.: [0660]'
12/08 06:33:43 aa1 (keyword 'Specifies' not found)
12/08 06:33:43 aa1 something foul in config line: '- `debug (sendfax)''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'controls the amount
of information written into the fax log file.'
12/08 06:33:43 aa1 (keyword 'controls' not found)
12/08 06:33:43 aa1 something foul in config line: '`0' means "totally
silent" (not even errors are written), `9''
12/08 06:33:43 aa1 (keyword '`0'' not found)
12/08 06:33:43 aa1 something foul in config line: 'is really noisy. I
usually use `3' or `4' in normal use, and `6''
12/08 06:33:43 aa1 (keyword 'is' not found)
12/08 06:33:43 aa1 something foul in config line: 'for debugging.: [4]'
12/08 06:33:43 aa1 (keyword 'for' not found)
12/08 06:33:43 aa1 something foul in config line: '- `modem-init''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'Specifies an `AT...'
command that is to be sent to the modem right'
12/08 06:33:43 aa1 (keyword 'Specifies' not found)
12/08 06:33:43 aa1 something foul in config line: 'at the *beginning*
of all modem talk (even before setting the modem'
12/08 06:33:43 aa1 (keyword 'at' not found)
12/08 06:33:43 aa1 something foul in config line: 'into fax mode, so
this could be an `ATZ' if you want to reset the'
12/08 06:33:43 aa1 (keyword 'into' not found)
12/08 06:33:43 aa1 something foul in config line: 'modem).: '
12/08 06:33:43 aa1 (keyword 'modem).:' not found)
12/08 06:33:43 aa1 something foul in config line: '- `modem-handshake''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'Specifies an `AT...'
command that will be sent to the modem at the'
12/08 06:33:43 aa1 (keyword 'Specifies' not found)
12/08 06:33:43 aa1 something foul in config line: '*end* of the modem
initialization, right before dialing. *Do not'
12/08 06:33:43 aa1 (keyword '*end*' not found)
12/08 06:33:43 aa1 something foul in config line: 'use ATZ or such
here*, since resetting the modem will switch off'
12/08 06:33:43 aa1 (keyword 'use' not found)
12/08 06:33:43 aa1 something foul in config line: 'fax mode.: [AT&H3]'
12/08 06:33:43 aa1 (keyword 'fax' not found)
12/08 06:33:43 aa1 something foul in config line: '- `max-tries''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'Specify the maximum
number of tries per page if the receiving end'
12/08 06:33:43 aa1 (keyword 'Specify' not found)
12/08 06:33:43 aa1 something foul in config line: 'reports reception
errors. If NNN tries do not suffice to'
12/08 06:33:43 aa1 (keyword 'reports' not found)
12/08 06:33:43 aa1 something foul in config line: 'successfully
transmit a page, `sendfax' will give up or simply go'
12/08 06:33:43 aa1 (keyword 'successfully' not found)
12/08 06:33:43 aa1 something foul in config line: 'on, depending on the
setting of `max-tries-continue' (see below).'
12/08 06:33:43 aa1 (keyword 'on,' not found)
12/08 06:33:43 aa1 something foul in config line: 'If this is set to
`0', `sendfax' will ignore retransmission'
12/08 06:33:43 aa1 (keyword 'If' not found)
12/08 06:33:43 aa1 something foul in config line: 'requests and simply
go on.: [3]'
12/08 06:33:43 aa1 (keyword 'requests' not found)
12/08 06:33:43 aa1 something foul in config line: '-
`max-tries-continue''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'After the maximum
number of tries for one page are reached,'
12/08 06:33:43 aa1 (keyword 'After' not found)
12/08 06:33:43 aa1 something foul in config line: '`sendfax' can report
an error and abort (`max-tries-continue NO'),'
12/08 06:33:43 aa1 (keyword '`sendfax'' not found)
12/08 06:33:43 aa1 something foul in config line: 'or go on with the
next page (YES).'
12/08 06:33:43 aa1 (keyword 'or' not found)
12/08 06:33:43 aa1 something foul in config line: 'For "mission
critical" faxes, I'd set it to NO, but since the page'
12/08 06:33:43 aa1 (keyword 'For' not found)
12/08 06:33:43 aa1 something foul in config line: 'quality is most
often quite good even if reported as "page bad",'
12/08 06:33:43 aa1 (keyword 'quality' not found)
12/08 06:33:43 aa1 something foul in config line: 'the default is YES.:
[YES]'
12/08 06:33:43 aa1 (keyword 'the' not found)
12/08 06:33:43 aa1 something foul in config line: '- `speed''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'Set the port speed
to use for fax send operations. Usually,'
12/08 06:33:43 aa1 (keyword 'Set' not found)
12/08 06:33:43 aa1 something foul in config line: '`38400' is a good
choice, but a few dumb modems (for example, some'
12/08 06:33:43 aa1 (keyword '`38400'' not found)
12/08 06:33:43 aa1 something foul in config line: 'based on rockwell
chipsets) need `19200' or even `9600'. A few'
12/08 06:33:43 aa1 (keyword 'based' not found)
12/08 06:33:43 aa1 something foul in config line: 'modems can go
higher, but `sendfax' may not support it, and it may'
12/08 06:33:43 aa1 (keyword 'modems' not found)
12/08 06:33:43 aa1 something foul in config line: 'not always work.:
[38400]'
12/08 06:33:43 aa1 (keyword 'not' not found)
12/08 06:33:43 aa1 something foul in config line: '- `dial-prefix''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'This is the command
used for dialing out. Usually this will be'
12/08 06:33:43 aa1 (keyword 'This' not found)
12/08 06:33:43 aa1 something foul in config line: 'something simple, as
`ATD' or `ATDP', but if you have an unusual'
12/08 06:33:43 aa1 (keyword 'something' not found)
12/08 06:33:43 aa1 something foul in config line: 'setup, it could also
be something like `ATX0DP0;X4DT' (meaning:'
12/08 06:33:43 aa1 (keyword 'setup,' not found)
12/08 06:33:43 aa1 something foul in config line: 'switch off dial-tone
detection, pulse-dial `0', back to command'
12/08 06:33:43 aa1 (keyword 'switch' not found)
12/08 06:33:43 aa1 something foul in config line: 'mode, switch on
dial-tone detection, and go ahead dialing with'
12/08 06:33:43 aa1 (keyword 'mode,' not found)
12/08 06:33:43 aa1 something foul in config line: 'touch tones). The
phone number will be sent right after the'
12/08 06:33:43 aa1 (keyword 'touch' not found)
12/08 06:33:43 aa1 something foul in config line: '`dial-prefix'.:
[ATD]'
12/08 06:33:43 aa1 (keyword '`dial-prefix'.:' not found)
12/08 06:33:43 aa1 something foul in config line: '- `poll-dir''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'This is used to
specify a directory where polled faxes (wheather'
12/08 06:33:43 aa1 (keyword 'This' not found)
12/08 06:33:43 aa1 something foul in config line: 'maps and such) are
to be saved into. Default is the current'
12/08 06:33:43 aa1 (keyword 'maps' not found)
12/08 06:33:43 aa1 something foul in config line: 'directory.: [./]'
12/08 06:33:43 aa1 (keyword 'directory.:' not found)
12/08 06:33:43 aa1 something foul in config line: '- `normal-res''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'If set to `yes' or
`true' (boolean), `sendfax' won't attempt to'
12/08 06:33:43 aa1 (keyword 'If' not found)
12/08 06:33:43 aa1 something foul in config line: 'make a fax
connection in "fine resolution" mode. Normally you'
12/08 06:33:43 aa1 (keyword 'make' not found)
12/08 06:33:43 aa1 something foul in config line: 'won't need to use
that option, since `faxrunq' will set the `-n''
12/08 06:33:43 aa1 (keyword 'won't' not found)
12/08 06:33:43 aa1 something foul in config line: 'switch if needed.:
[NO]'
12/08 06:33:43 aa1 (keyword 'switch' not found)
12/08 06:33:43 aa1 something foul in config line: '- `verbose''
12/08 06:33:43 aa1 (keyword '-' not found)
12/08 06:33:43 aa1 something foul in config line: 'If set to `yes' or
`true', `sendfax' will output progress reports'
12/08 06:33:43 aa1 (keyword 'If' not found)
12/08 06:33:43 aa1 something foul in config line: 'on stdout, if set to
`no', `sendfax' will only print error and'
12/08 06:33:43 aa1 (keyword 'on' not found)
12/08 06:33:43 aa1 something foul in config line: 'warning messages.:
[NO]'
12/08 06:33:43 aa1 (keyword 'warning' not found)
12/08 06:33:43 aa1 something foul in config line: 'Settings for port
cuaa1'
12/08 06:33:43 aa1 (keyword 'Settings' not found)
12/08 06:33:43 aa1 something foul in config line:
'------------------------ '
12/08 06:33:43 aa1 (keyword '------------------------' not found)
12/08 06:33:43 aa1 something foul in config line: 'modem-handshake
AT&H3'
12/08 06:33:43 aa1 (keyword 'modem-handshake' not found)
12/08 06:33:43 aa1 something foul in config line: 'max-tries 3'
12/08 06:33:43 aa1 (keyword 'max-tries' not found)
12/08 06:33:43 aa1 something foul in config line: 'max-tries-continue
YES'
12/08 06:33:43 aa1 (keyword 'max-tries-continue' not found)
12/08 06:33:43 aa1 something foul in config line: 'dial-prefix ATD'
12/08 06:33:43 aa1 (keyword 'dial-prefix' not found)
12/08 06:33:43 aa1 something foul in config line: 'poll-dir ./'
12/08 06:33:43 aa1 (keyword 'poll-dir' not found)
12/08 06:33:43 aa1 something foul in config line: 'normal-res NO'
12/08 06:33:43 aa1 (keyword 'normal-res' not found)
12/08 06:33:43 aa1 something foul in config line: 'verbose NO'
12/08 06:33:43 aa1 (keyword 'verbose' not found)
12/08 06:33:43 aa1 something foul in config line: 'OK?: [y]'
12/08 06:33:43 aa1 (keyword 'OK?:' not found)
12/08 06:33:43 aa1 check for lockfiles
12/08 06:33:43 aa1 locking the line
12/08 06:33:43 aa1 WARNING: DSR is off - modem turned off or bad cable?
12/08 06:33:43 aa1 lowering DTR to reset Modem
12/08 06:33:44 aa1 send: ATS0=0Q0&D3&C1[0d]
12/08 06:33:44 aa1 waiting for ``OK''
12/08 06:34:04 aa1 timeout in chat script, waiting for `OK'
12/08 06:34:04 aa1 init chat timed out, trying force-init-chat
12/08 06:34:04 aa1 send: \d[10][03]\d\d\d+++\d\d\d[0d]\dATQ0V1H0[0d]
12/08 06:34:08 aa1 waiting for ``OK''
12/08 06:34:28 aa1 timeout in chat script, waiting for `OK'
12/08 06:34:28 aa1 init chat failed, exiting...: Interrupted system
call
12/08 06:34:28 ##### failed in mg_init_data, dev=cuaa1, pid=435
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3C13AD59.28E8AC3B>