Date: Fri, 3 Jul 1998 10:44:31 +0300 (EET DST) From: Yury Yaroshevsky <yk@info.dgtu.donetsk.ua> To: freebsd-stable@FreeBSD.ORG Subject: Troubles with slattach in 2.2.6-STABLE ... Message-ID: <199807030744.KAA29544@info.dgtu.donetsk.ua>
next in thread | raw e-mail | index | archive | help
Hi , I'm running FreeBSD 2.2-STABLE (cvs(over ctm)#4434) and am having problem with slip: Jul 2 12:40:18 cross /kernel: Copyright (c) 1992-1998 FreeBSD Inc. Jul 2 12:40:18 cross /kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993 Jul 2 12:40:18 cross /kernel: The Regents of the University of California. All rights reserved. Jul 2 12:40:19 cross /kernel: Jul 2 12:40:19 cross /kernel: FreeBSD 2.2.6-STABLE #0: Thu Jul 2 12:39:43 EEST 1998 Jul 2 12:40:19 cross /kernel: yk@work.dgtu.donetsk.ua:/usr/src/sys/compile/CROSS Jul 2 12:40:19 cross /kernel: CPU: AMD Am5x86 Write-Back (486-class CPU) Jul 2 12:40:19 cross /kernel: Origin = "AuthenticAMD" Id = 0x4f4 Stepping=4 Jul 2 12:40:19 cross /kernel: Features=0x1<FPU> Jul 2 12:40:19 cross /kernel: real memory = 16777216 (16384K bytes) Jul 2 12:40:20 cross /kernel: Probing for devices on PCI bus 0: Jul 2 12:40:20 cross /kernel: chip0 <SiS 85c496> rev 49 on pci0:5:0 Jul 2 12:40:20 cross /kernel: Probing for devices on the ISA bus: Jul 2 12:40:20 cross /kernel: sc0 at 0x60-0x6f irq 1 on motherboard Jul 2 12:40:20 cross /kernel: sc0: VGA color <16 virtual consoles, flags=0x0> Jul 2 12:40:20 cross /kernel: ed0 at 0x340-0x35f irq 5 on isa Jul 2 12:40:20 cross /kernel: ed0: address 00:50:4e:05:90:89, type NE2000 (16 bit) Jul 2 12:40:20 cross /kernel: lpt0 at 0x378-0x37f irq 7 on isa Jul 2 12:40:20 cross /kernel: lpt0: Interrupt-driven port Jul 2 12:40:20 cross /kernel: lp0: TCP/IP capable interface Jul 2 12:40:20 cross /kernel: sio0 at 0x3f8-0x3ff irq 4 on isa Jul 2 12:40:20 cross /kernel: sio0: type 16550A Jul 2 12:40:21 cross /kernel: sio1 at 0x2f8-0x2ff irq 3 on isa Jul 2 12:40:21 cross /kernel: sio1: type 16550A Jul 2 12:40:21 cross /kernel: wdc0 at 0x1f0-0x1f7 irq 14 on isa Jul 2 12:40:21 cross /kernel: wdc0: unit 0 (wd0): <WDC AC2635F> Jul 2 12:40:21 cross /kernel: wd0: 610MB (1249920 sectors), 1240 cyls, 16 heads, 63 S/T, 512 B/S Jul 2 12:40:21 cross /kernel: fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa Jul 2 12:40:21 cross /kernel: npx0 on motherboard Jul 2 12:40:21 cross /kernel: npx0: INT 16 interface Jul 2 12:40:21 cross /kernel: ccd0-3: Concatenated disk drivers Jul 2 12:40:21 cross /kernel: IP packet filtering initialized, divert enabled, default to accept, unlimited logging Jul 2 12:41:21 cross login: ROOT LOGIN (root) ON ttyv1 Leased line is up by SRM Patton 1004. I'm run slattach manually. /sbin/slattach -c -l -S 10 -s 57600 ttyd1 Jul 2 12:41:41 cross slattach[187]: sl10 connected to /dev//ttyd1 at 57600 baud ifconfig sl10 inet ip1 ip2 If I trying to send any TCP or UDP packets, my host was rebooted :(((((( without any warning. But pinging remote host perform successfully. Jul 2 12:48:22 cross /kernel: Copyright (c) 1992-1998 FreeBSD Inc. Jul 2 12:48:22 cross /kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993 Jul 2 12:48:22 cross /kernel: The Regents of the University of California. All rights reserved. Jul 2 12:48:22 cross /kernel: Jul 2 12:48:22 cross /kernel: FreeBSD 2.2.6-STABLE #0: Thu Jul 2 12:39:43 EEST 1998 Jul 2 12:48:22 cross /kernel: yk@work.dgtu.donetsk.ua:/usr/src/sys/compile/CROSS Jul 2 12:48:22 cross /kernel: CPU: AMD Am5x86 Write-Back (486-class CPU) Jul 2 12:48:22 cross /kernel: Origin = "AuthenticAMD" Id = 0x4f4 Stepping=4 Jul 2 12:48:22 cross /kernel: Features=0x1<FPU> Jul 2 12:48:22 cross /kernel: real memory = 16777216 (16384K bytes) Jul 2 12:48:22 cross /kernel: avail memory = 14856192 (14508K bytes) Jul 2 12:48:22 cross /kernel: Probing for devices on PCI bus 0: Jul 2 12:48:22 cross /kernel: chip0 <SiS 85c496> rev 49 on pci0:5:0 Jul 2 12:48:23 cross /kernel: Probing for devices on the ISA bus: Jul 2 12:48:23 cross /kernel: sc0 at 0x60-0x6f irq 1 on motherboard Jul 2 12:48:23 cross /kernel: sc0: VGA color <16 virtual consoles, flags=0x0> Jul 2 12:48:23 cross /kernel: ed0 at 0x340-0x35f irq 5 on isa Jul 2 12:48:23 cross /kernel: ed0: address 00:50:4e:05:90:89, type NE2000 (16 bit) Jul 2 12:48:23 cross /kernel: lpt0 at 0x378-0x37f irq 7 on isa Jul 2 12:48:23 cross /kernel: lpt0: Interrupt-driven port Jul 2 12:48:23 cross /kernel: lp0: TCP/IP capable interface Jul 2 12:48:23 cross /kernel: sio0 at 0x3f8-0x3ff irq 4 on isa Jul 2 12:48:23 cross /kernel: sio0: type 16550A Jul 2 12:48:23 cross /kernel: sio1 at 0x2f8-0x2ff irq 3 on isa Jul 2 12:48:23 cross /kernel: sio1: type 16550A Jul 2 12:48:23 cross /kernel: wdc0 at 0x1f0-0x1f7 irq 14 on isa Jul 2 12:48:24 cross /kernel: wdc0: unit 0 (wd0): <WDC AC2635F> Jul 2 12:48:24 cross /kernel: wd0: 610MB (1249920 sectors), 12 Jul 2 12:48:24 cross /kernel: 40 cyls, 16 heads, 63 S/T, 512 B/S Jul 2 12:48:24 cross /kernel: fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa Jul 2 12:48:24 cross /kernel: npx0 on motherboard Jul 2 12:48:24 cross /kernel: npx0: INT 16 interface Jul 2 12:48:24 cross /kernel: ccd0-3: Concatenated disk drivers Jul 2 12:48:24 cross /kernel: IP packet filtering initialized, divert enabled, default to accept, unlimited logging Jul 2 12:48:24 cross /kernel: WARNING: / was not properly dismounted. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Jul 2 12:49:26 cross login: ROOT LOGIN (root) ON ttyv2 Jul 2 13:13:21 cross login: ROOT LOGIN (root) ON ttyv1 This is bug in slattach? Any ideas? PS. I'm probe some version cvs. #4389 - #4434. (20-30 June 1998) PPS. After experiments I discovered that : I have 16 slip interfaces in kernel. So, if I try up slattach on sl0 - this work. But if I try up slattach on any other slip interfaces - situation described above repeated. See my config of kernel: machine "i386" ident CROSS maxusers 30 options INCLUDE_CONFIG_FILE # Include this file in kernel config kernel root on wd0 ##################################################################### # CPU OPTIONS cpu "I486_CPU" cpu "I586_CPU" # aka Pentium(tm) ##################################################################### # COMPATIBILITY OPTIONS options "COMPAT_43" options SYSVSHM options SYSVSEM options SYSVMSG options "MD5" ##################################################################### # DEBUGGING OPTIONS #options DDB #options DDB_UNATTENDED #options KTRACE #kernel tracing #options DIAGNOSTIC #options PERFMON #options UCONSOLE options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor ##################################################################### # NETWORKING OPTIONS options INET #Internet communications protocols pseudo-device ether #Generic Ethernet pseudo-device loop #Network loopback device pseudo-device sl 16 #Serial Line IP #pseudo-device ppp 2 #Point-to-point protocol pseudo-device bpfilter 4 #Berkeley packet filter pseudo-device disc #Discard device pseudo-device tun 1 #Tunnel driver(user process ppp) options IPFIREWALL #firewall options IPFIREWALL_VERBOSE #print information about # dropped packets options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default options IPDIVERT #divert sockets ##################################################################### # FILESYSTEM OPTIONS options FFS #Fast filesystem options "CD9660" #ISO 9660 filesystem options KERNFS #Kernel filesystem options MSDOSFS #MS DOS filesystem options PROCFS #Process filesystem ##################################################################### # SCSI DEVICES ##################################################################### # MISCELLANEOUS DEVICES AND OPTIONS pseudo-device pty 20 #Pseudo ttys - can go as high as 256 #pseudo-device vcfs 4 #coda minicache <-> venus comm. #pseudo-device speaker #Play IBM BASIC-style noises out your speaker pseudo-device log #Kernel syslog interface (/dev/klog) pseudo-device gzip #Exec gzipped a.out's pseudo-device vn #Vnode driver (turns a file into a device) pseudo-device snp 3 #Snoop device - to look at pty/vty/etc.. pseudo-device ccd 4 #Concatenated disk driver # Size of the kernel message buffer. Should be N * pagesize. options "MSGBUF_SIZE=40960" ##################################################################### # HARDWARE DEVICE CONFIGURATION controller isa0 options "AUTO_EOI_1" #controller pnp0 device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr options MAXCONS=16 # number of virtual consoles device npx0 at isa? port "IO_NPX" iosiz 0x0 flags 0x0 irq 13 vector npxintr controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 #options ATAPI #Enable ATAPI support for IDE bus #options ATAPI_STATIC #Don't do it as an LKM #device wcd0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 device lpt0 at isa? port? tty irq 7 vector lptintr device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device ed0 at isa? port 0x320 net irq 10 iomem 0xd8000 vector edintr #controller snd0 #device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr #device mpu0 at isa? port 0x330 irq 10 drq 0 #device pca0 at isa? port IO_TIMER1 tty #options APM_IDLE_CPU # Tell APM to idle rather than halt'ing the cpu #device apm0 at isa? #options APM_BROKEN_STATCLOCK controller pci0 #options COMPAT_LINUX #options DEBUG #options "EXT2FS" #options "IBCS2" Any of ideas? This is problems with options "-S" ? How I can resolve this task? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199807030744.KAA29544>