Skip site navigation (1)Skip section navigation (2)
Date:      Sun,  7 Nov 2004 08:28:01 +0100
From:      <admin@unixdaemon.org>
To:        <freebsd-questions@freebsd.org>
Subject:   5.3 Release CD ROM Time out Issues
Message-ID:  <0MKz1m-1CQhUw00e5-0003LI@mrelay.perfora.net>

next in thread | raw e-mail | index | archive | help

I have a fresh install of 5.3 Release my dvd burner drive conitunes to
timeout and yes the drive is set as slave...heres my dmesg

acd0: DVDROM <JLMS DVD-ROM LTD-166S/DS08> at ata1-master UDMA33
acd0: DMA limited to UDMA33, non-ATA66 cable or device
acd1: FAILURE - MODE_SENSE_BIG timed out
acd0: DMA limited to UDMA33, non-ATA66 cable or device
acd1: FAILURE - MODE_SENSE_BIG timed out
acd0: DMA limited to UDMA33, non-ATA66 cable or device
acd1: FAILURE - MODE_SENSE_BIG timed out
acd0: DMA limited to UDMA33, non-ATA66 cable or device
acd1: FAILURE - MODE_SENSE_BIG timed out
acd0: DMA limited to UDMA33, non-ATA66 cable or device
acd1: FAILURE - MODE_SENSE_BIG timed out
acd1: CDROM <TDK DVDRW420N/1.39> at ata1-slave UDMA33
acd0: DMA limited to UDMA33, non-ATA66 cable or device
acd1: FAILURE - TEST_UNIT_READY timed out
acd0: DMA limited to UDMA33, non-ATA66 cable or device
acd1: FAILURE - PREVENT_ALLOW timed out
acd0: DMA limited to UDMA33, non-ATA66 cable or device
acd1: FAILURE - TEST_UNIT_READY timed out
acd0: DMA limited to UDMA33, non-ATA66 cable or device
acd1: FAILURE - TEST_UNIT_READY timed out
acd0: DMA limited to UDMA33, non-ATA66 cable or device
acd1: FAILURE - PREVENT_ALLOW timed out
acd0: DMA limited to UDMA33, non-ATA66 cable or device
acd1: FAILURE - TEST_UNIT_READY timed out
acd0: DMA limited to UDMA33, non-ATA66 cable or device
acd1: FAILURE - PREVENT_ALLOW timed out
acd0: DMA limited to UDMA33, non-ATA66 cable or device
acd1: FAILURE - TEST_UNIT_READY timed out
acd0: DMA limited to UDMA33, non-ATA66 cable or device
acd1: FAILURE - TEST_UNIT_READY timed out
acd0: DMA limited to UDMA33, non-ATA66 cable or device
acd1: FAILURE - PREVENT_ALLOW timed out
acd0: DMA limited to UDMA33, non-ATA66 cable or device
acd1: FAILURE - TEST_UNIT_READY timed out


It goes on for awhile before booting its TDK 420NBurner has been working
perfectly since 5.x with no errors. The hardware is fine sometimes the
machine boots without errors but thats a rarity, so i am not sure why
exactly its behaving this way.

If you want to view my complete dmesg its @
http://unixdaemon.org/dmesg.txt



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?0MKz1m-1CQhUw00e5-0003LI>