From owner-freebsd-acpi@FreeBSD.ORG Fri Jun 30 01:55:12 2006 Return-Path: X-Original-To: freebsd-acpi@freebsd.org Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id F18FB16A416 for ; Fri, 30 Jun 2006 01:55:11 +0000 (UTC) (envelope-from gofda-freebsd-acpi@m.gmane.org) Received: from ciao.gmane.org (main.gmane.org [80.91.229.2]) by mx1.FreeBSD.org (Postfix) with ESMTP id E911343D48 for ; Fri, 30 Jun 2006 01:55:10 +0000 (GMT) (envelope-from gofda-freebsd-acpi@m.gmane.org) Received: from root by ciao.gmane.org with local (Exim 4.43) id 1Fw8Do-00022g-1R for freebsd-acpi@freebsd.org; Fri, 30 Jun 2006 03:55:04 +0200 Received: from gw205.f5.com ([205.229.151.151]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Fri, 30 Jun 2006 03:55:03 +0200 Received: from atkin901 by gw205.f5.com with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Fri, 30 Jun 2006 03:55:03 +0200 X-Injected-Via-Gmane: http://gmane.org/ To: freebsd-acpi@freebsd.org From: othermark Date: Thu, 29 Jun 2006 14:51:34 -0700 Lines: 812 Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7Bit X-Complaints-To: usenet@sea.gmane.org X-Gmane-NNTP-Posting-Host: gw205.f5.com User-Agent: KNode/0.10.2 Sender: news Subject: acpi on msi-9218 (-current) swaps sio0 and sio1 X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 30 Jun 2006 01:55:12 -0000 With acpi loaded on a msi-9218 motherboard, I'm seeing sio0 and sio1 get 'swapped.' Even though the kernel is compiled for console on 0x3f8, I've had to change the /etc/ttys to use ttyd1 so login is displayed when the system is booted. Empirically, this tells me that 0x3f8 is correct for sio0 (since the kernel and boot loader display fine using it as comconsole). Is there a way to force this to be consistant? This is -current from Jun 8. I will try a more recent kernel soon. The following is a verbose boot log. Note that the LCD driver tries to use cuad0 since the console is using ttyd1 (cuad0) after bootup. However, since the kernel output has ttyd0/sio0/cuad0 tied up, it fails to attach. It will attach later after bootup, but not work. Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 7.0-CURRENT #1: Thu Jun 8 08:11:00 PDT 2006 root@pogo-1.f5test.net:/usr/obj/usr/src/sys/POGO WARNING: WITNESS option enabled, expect reduced performance. Using 32 colors for the VM-PQ tuning (1024, 8) Preloaded elf kernel "/boot/kernel/kernel" at 0xc0cdb000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0cdb1a8. MP Configuration Table version 1.4 found at 0xc009fda1 Table 'FACP' at 0x3fe9cda9 Table 'ASF!' at 0x3fe9ce1d Table 'SPCR' at 0x3fe9cee4 Table 'MCFG' at 0x3fe9cf34 Table 'APIC' at 0x3fe9cf70 MADT: Found table at 0x3fe9cf70 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 1: enabled SMP: Added CPU 1 (AP) INTR: Adding local APIC 0 as a target ACPI APIC Table: Calibrating clock(s) ... i8254 clock: 1193219 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 3192019656 Hz CPU: Intel(R) Pentium(R) D CPU 3.20GHz (3192.02-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf44 Stepping = 4 Features=0xbfebfbff Features2=0x649d AMD Features=0x20100000 Cores per package: 2 Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 128 entries Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries 1st-level data cache: 16 KB, 8-way set associative, sectored cache, 64 byte line size Trace cache: 12K-uops, 8-way set associative 2nd-level cache: 1 MB, 8-way set associative, sectored cache, 64 byte line size L2 cache: 1024 kbytes, 8-way associative, 64 bytes/line real memory = 1072234496 (1022 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001028000 - 0x000000003ec55fff, 1036181504 bytes (252974 pages) avail memory = 1035837440 (987 MB) INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00f60f0 bios32: Entry = 0xfd450 (c00fd450) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd450+0x34c pnpbios: Found PnP BIOS data at 0xc00f6180 pnpbios: Entry = f0000:a9fa Rev = 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic0: intpin 16 -> PCI IRQ 16 (level, low) ioapic0: intpin 17 -> PCI IRQ 17 (level, low) ioapic0: intpin 18 -> PCI IRQ 18 (level, low) ioapic0: intpin 19 -> PCI IRQ 19 (level, low) ioapic0: intpin 20 -> PCI IRQ 20 (level, low) ioapic0: intpin 21 -> PCI IRQ 21 (level, low) ioapic0: intpin 22 -> PCI IRQ 22 (level, low) ioapic0: intpin 23 -> PCI IRQ 23 (level, low) MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: high lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000200 err: 0x00010000 pcm: 0x00010000 wlan: <802.11 Link Layer> ath_rate: version 1.2 null: random: nfslock: pseudo-device io: kbd: new array size 4 kbd1 at kbdmux0 mem: Pentium Pro MTRR support enabled ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) rr232x: RocketRAID 232x controller driver v1.02 (Jun 8 2006 08:10:46) npx0: INT 16 interface acpi0: on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fa20 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=27788086) pcibios: BIOS version 2.10 AcpiOsDerivePciId: bus 0 dev 31 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: Power Button (fixed) AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 3 10 11 14 15 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 3 10 11 14 15 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 10 11 14 15 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 12 N 0 3 10 11 14 15 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 10 11 14 15 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 10 11 14 15 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 10 11 14 15 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 10 11 14 15 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 10 11 14 15 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 3 10 11 14 15 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 3 10 11 14 15 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 10 11 14 15 pci_link4: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 10 11 14 15 pci_link4: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 10 11 14 15 pci_link4: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 10 11 14 15 pci_link5: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 10 11 14 15 pci_link5: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 10 11 14 15 pci_link5: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 10 11 14 15 pci_link6: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 10 11 14 15 pci_link6: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 10 11 14 15 pci_link6: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 10 11 14 15 pci_link7: Links after initial probe: Index IRQ Rtd Ref IRQs 0 5 N 0 3 10 11 14 15 pci_link7: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 10 11 14 15 pci_link7: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 10 11 14 15 cpu0: on acpi0 acpi_perf0: on cpu0 acpi_perf0: failed in PERF_STATUS attach device_attach: acpi_perf0 attach returned 6 acpi_perf0: on cpu0 acpi_perf0: failed in PERF_STATUS attach device_attach: acpi_perf0 attach returned 6 acpi_throttle0: on cpu0 acpi_throttle0: P_CNT from P_BLK 0x1010 cpu1: on acpi0 acpi_throttle1: on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x2778, revid=0x81 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2779, revid=0x81 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0100, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x27d0, revid=0x01 bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=12 pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x27e0, revid=0x01 bus=0, slot=28, func=4 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=12 pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x27e2, revid=0x01 bus=0, slot=28, func=5 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 16 found-> vendor=0x8086, dev=0x27c8, revid=0x01 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 map[20]: type 4, range 32, base 00003000, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x27c9, revid=0x01 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type 4, range 32, base 00003020, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x27ca, revid=0x01 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[20]: type 4, range 32, base 00003040, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x27cb, revid=0x01 bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 map[20]: type 4, range 32, base 00003060, size 5, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 16 found-> vendor=0x8086, dev=0x27cc, revid=0x01 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base d8500000, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x244e, revid=0xe1 bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27b8, revid=0x01 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27df, revid=0x01 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type 4, range 32, base 000030a0, size 4, enabled found-> vendor=0x8086, dev=0x27c0, revid=0x01 bus=0, slot=31, func=2 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 000030e8, size 3, enabled map[14]: type 4, range 32, base 000030dc, size 2, enabled map[18]: type 4, range 32, base 000030e0, size 3, enabled map[1c]: type 4, range 32, base 000030d8, size 2, enabled map[20]: type 4, range 32, base 000030b0, size 4, enabled map[24]: type 1, range 32, base d8500400, size 10, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x27da, revid=0x01 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0101, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type 4, range 32, base 00001100, size 5, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 pcib1: irq 16 at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x0-0x0 pcib1: memory decode 0x0-0x0 pcib1: prefetched decode 0x0-0x0 pci1: on pcib1 pci1: physical bus=1 pcib2: irq 17 at device 28.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x0-0x0 pcib2: memory decode 0x0-0x0 pcib2: prefetched decode 0x0-0x0 pci2: on pcib2 pci2: physical bus=2 pcib3: irq 17 at device 28.4 on pci0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0x4000-0x4fff pcib3: memory decode 0xd8000000-0xd80fffff pcib3: prefetched decode 0xfff00000-0xfffff pci3: on pcib3 pci3: physical bus=3 found-> vendor=0x8086, dev=0x108b, revid=0x03 bus=3, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 32, base d8000000, size 17, enabled pcib3: (null) requested memory range 0xd8000000-0xd801ffff: good map[18]: type 4, range 32, base 00004000, size 5, enabled pcib3: (null) requested I/O range 0x4000-0x401f: in range pcib3: matched entry for 3.0.INTA pcib3: slot 0 INTA hardwired to IRQ 16 em0: port 0x4000-0x401f mem 0xd8000000-0xd801ffff irq 16 at device 0.0 on pci3 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xd8000000 em0: Reserved 0x20 bytes for rid 0x18 type 4 at 0x4000 em0: bpf attached em0: Ethernet address: 00:13:d3:fe:05:8e ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49 em0: [FAST] pcib4: irq 16 at device 28.5 on pci0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0x5000-0x5fff pcib4: memory decode 0xd8100000-0xd81fffff pcib4: prefetched decode 0xfff00000-0xfffff pci4: on pcib4 pci4: physical bus=4 found-> vendor=0x8086, dev=0x108b, revid=0x00 bus=4, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 32, base d8100000, size 17, enabled pcib4: (null) requested memory range 0xd8100000-0xd811ffff: good map[18]: type 4, range 32, base 00005000, size 5, enabled pcib4: (null) requested I/O range 0x5000-0x501f: in range pcib4: matched entry for 4.0.INTA pcib4: slot 0 INTA hardwired to IRQ 17 em1: port 0x5000-0x501f mem 0xd8100000-0xd811ffff irq 17 at device 0.0 on pci4 em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xd8100000 em1: Reserved 0x20 bytes for rid 0x18 type 4 at 0x5000 em1: bpf attached em1: Ethernet address: 00:13:d3:fe:05:8f ioapic0: routing intpin 17 (PCI IRQ 17) to vector 50 em1: [FAST] uhci0: port 0x3000-0x301f irq 23 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3000 ioapic0: routing intpin 23 (PCI IRQ 23) to vector 51 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x3020-0x303f irq 19 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3020 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 52 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0x3040-0x305f irq 18 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3040 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 53 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: on usb2 uhub2: 2 ports with 2 removable, self powered uhci3: port 0x3060-0x307f irq 16 at device 29.3 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3060 uhci3: [GIANT-LOCKED] usb3: on uhci3 usb3: USB revision 1.0 uhub3: on usb3 uhub3: 2 ports with 2 removable, self powered ehci0: mem 0xd8500000-0xd85003ff irq 23 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd8500000 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: on ehci0 usb4: USB revision 2.0 uhub4: on usb4 uhub4: 8 ports with 8 removable, self powered pcib5: at device 30.0 on pci0 pcib5: secondary bus 10 pcib5: subordinate bus 10 pcib5: I/O decode 0x6000-0x6fff pcib5: memory decode 0xd8200000-0xd82fffff pcib5: prefetched decode 0xd0000000-0xd7ffffff pcib5: Subtractively decoded bridge. pci10: on pcib5 pci10: physical bus=10 found-> vendor=0x1002, dev=0x5159, revid=0x00 bus=10, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0387, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base d0000000, size 27, enabled pcib5: (null) requested memory range 0xd0000000-0xd7ffffff: good map[14]: type 4, range 32, base 00006000, size 8, enabled pcib5: (null) requested I/O range 0x6000-0x60ff: in range map[18]: type 1, range 32, base d8200000, size 16, enabled pcib5: (null) requested memory range 0xd8200000-0xd820ffff: good pcib5: matched entry for 10.0.INTA pcib5: slot 0 INTA hardwired to IRQ 16 vgapci0: port 0x6000-0x60ff mem 0xd0000000-0xd7ffffff,0xd8200000-0xd820ffff irq 16 at device 0.0 on pci10 isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30a0-0x30af at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x30a0 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=51 ostat1=00 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x4 ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54 ata0: [MPSAFE] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ioapic0: routing intpin 15 (ISA IRQ 15) to vector 55 ata1: [MPSAFE] atapci1: port 0x30e8-0x30ef,0x30dc-0x30df,0x30e0-0x30e7,0x30d8-0x30db,0x30b0-0x30bf mem 0xd8500400-0xd85007ff irq 19 at device 31.2 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x30b0 atapci1: [MPSAFE] atapci1: Reserved 0x400 bytes for rid 0x24 type 3 at 0xd8500400 ata2: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x30e8 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x30dc ata2: reset tp1 mask=03 ostat0=7f ostat1=7f ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat1=0x7f err=0xff lsb=0xff msb=0xff ata2: reset tp2 stat0=ff stat1=ff devices=0x0 ata2: [MPSAFE] ata3: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x30e0 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x30d8 ata3: reset tp1 mask=03 ostat0=50 ostat1=00 ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1 ata3: [MPSAFE] pci0: at device 31.3 (no driver attached) acpi_button0: on acpi0 sio0: irq maps: 0x4c21 0x4c29 0x4c21 0x4c21 sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0 sio0: type 16550A, console ioapic0: routing intpin 3 (ISA IRQ 3) to vector 56 sio0: [FAST] sio1: irq maps: 0x4c21 0x4c31 0x4c21 0x4c21 sio1: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0 sio1: type 16550A ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57 sio1: [FAST] psmcpnp0: irq 12 on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 58 atkbd0: [GIANT-LOCKED] psm0: current command byte:0067 psm0: failed to reset the aux device. ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete ex_isa_identify() unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xc0000-0xcafff,0xdc000-0xdffff,0xe0000-0xe17ff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port not found. ppc0: failed to probe at irq 7 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered lapic: Divisor 2, Frequency 99750618 hz Timecounter "TSC" frequency 3192019656 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached rr232x: no controller detected. em0: Link is up 1000 Mbps Full Duplex em1: Link is up 1000 Mbps Full Duplex ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting PIO4 on ICH7 chip acd0: setting UDMA33 on ICH7 chip acd0: CDRW drive at ata0 as master acd0: 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad6: 76319MB at ata3-master SATA150 ad6: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad6 ad6: Intel check1 failed ad6: Adaptec check1 failed ad6: LSI (v3) check1 failed ad6: LSI (v2) check1 failed ad6: FreeBSD check1 failed ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 INTR: Assigning IRQ 1 to local APIC 0 ioapic0: Assigning ISA IRQ 1 to local APIC 0 INTR: Assigning IRQ 3 to local APIC 1 ioapic0: Assigning ISA IRQ 3 to local APIC 1 INTR: Assigning IRQ 4 to local APIC 0 ioapic0: Assigning ISA IRQ 4 to local APIC 0 INTR: Assigning IRQ 9 to local APIC 1 ioapic0: Assigning ISA IRQ 9 to local APIC 1 INTR: Assigning IRQ 14 to local APIC 0 ioapic0: Assigning ISA IRQ 14 to local APIC 0 INTR: Assigning IRQ 15 to local APIC 1 ioapic0: Assigning ISA IRQ 15 to local APIC 1 INTR: Assigning IRQ 16 to local APIC 0 ioapic0: Assigning PCI IRQ 16 to local APIC 0 INTR: Assigning IRQ 17 to local APIC 1 ioapic0: Assigning PCI IRQ 17 to local APIC 1 INTR: Assigning IRQ 18 to local APIC 0 ioapic0: Assigning PCI IRQ 18 to local APIC 0 INTR: Assigning IRQ 19 to local APIC 1 ioapic0: Assigning PCI IRQ 19 to local APIC 1 INTR: Assigning IRQ 23 to local APIC 0 ioapic0: Assigning PCI IRQ 23 to local APIC 0 Trying to mount root from ufs:/dev/ad6s1a start_init: trying /sbin/init Loading configuration files. kernel dumps on /dev/ad6s1b Entropy harvesting: interrupts ethernet point_to_point kickstart . swapon: adding /dev/ad6s1b as swap device Starting file system checks: /dev/ad6s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad6s1a: clean, 35769111 free (9167 frags, 4469993 blocks, 0.0% fragmentation) Setting hostname: pogo-2.f5test.net. em0: Link is Down em1: Link is Down lo0: flags=8049 mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet 127.0.0.1 netmask 0xff000000 em0: flags=8843 mtu 1500 options=8b inet6 fe80::213:d3ff:fefe:58e%em0 prefixlen 64 tentative scopeid 0x1 inet 172.16.17.2 netmask 0xfffff000 broadcast 172.16.31.255 ether 00:13:d3:fe:05:8e media: Ethernet autoselect status: no carrier em1: flags=8843 mtu 1500 options=8b inet6 fe80::213:d3ff:fefe:58f%em1 prefixlen 64 tentative scopeid 0x2 inet 172.16.64.2 netmask 0xfffff000 broadcast 172.16.79.255 ether 00:13:d3:fe:05:8f media: Ethernet autoselect status: no carrier Starting devd. hw.acpi.cpu.cx_lowest: C1 -> C1 add net 172.16.240.0: gateway 172.16.31.33 Additional routing options: . add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 net.inet6.ip6.forwarding: 0 -> 0 net.inet6.ip6.accept_rtadv: 0 -> 1 em0: Link is up 1000 Mbps Full Duplex em1: Link is up 1000 Mbps Full Duplex add net fe80::: gateway ::1 add net ff02::: gateway ::1 IPv4 mapped IPv6 address support=YES Mounting NFS file systems: . ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout Creating and/or trimming log files: . Starting syslogd. Checking for core dump on /dev/ad6s1b... savecore: no dumps found Initial i386 initialization: . Additional ABI support: . NFS access cache time=60 Starting lighttpd. Starting LCDd. Jun 29 14:36:29 pogo-2 LCDd: ms6931: open(/dev/cuad0) failed (Device busy) Jun 29 14:36:29 pogo-2 LCDd: Driver [ms6931] init failed, return code < 0 Jun 29 14:36:29 pogo-2 LCDd: Could not load driver ms6931 Jun 29 14:36:29 pogo-2 LCDd: There is no output driver Jun 29 14:36:29 pogo-2 LCDd: Critical error while initializing, abort. Starting lcdproc. Error connecting to LCD server localhost on port 13666. Check to see that the server is running and operating normally. Starting local daemons: . Updating motd . Starting ntpd. Configuring syscons: blanktime . Starting sshd. Starting cron. Local package initialization: . Additional TCP options: . Starting inetd. Starting background file system checks in 60 seconds. Thu Jun 29 14:36:30 PDT 2006 Jun 29 14:36:36 pogo-2 login: ROOT LOGIN (root) ON ttyd1 -- othermark atkin901 at nospam dot yahoo dot com (!wired)?(coffee++):(wired);