Date: Sat, 4 Jun 2005 08:41:13 GMT From: Anton <ksenux@farmwest.com.ua> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/81887: Adaptec SCSI 2130S aac0: GetDeviceProbeInfo command Message-ID: <200506040841.j548fDD2001642@www.freebsd.org> Resent-Message-ID: <200506040850.j548o1we013765@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 81887 >Category: i386 >Synopsis: Adaptec SCSI 2130S aac0: GetDeviceProbeInfo command >Confidential: no >Severity: serious >Priority: high >Responsible: freebsd-i386 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Sat Jun 04 08:50:01 GMT 2005 >Closed-Date: >Last-Modified: >Originator: Anton >Release: 5.4R >Organization: FarmWest >Environment: FreeBSD 5.4-RELEASE FreeBSD #0: Sun May 8 10:21:06 >Description: I have installed FreeBSD 5.4R on adaptec 2130S scsi raid, and in dmesg see this error messages: aac0: Error 5 sending GetDeviceProbeInfo command ..AutoSense Failed aac0: <Adaptec SCSI RAID 2130S> mem 0xc0000000-0xc7ffffff,0xc8000000-0xc87fffff irq 24 at device 1.0 on pci2 aac0: Unknown processor 200MHz, 112MB cache memory, optional battery not installed aac0: Kernel 4.2-0, Build 7338, S/N 263be0 aac0: Supported Options=31d7c<WCACHE,DATA64,HOSTTIME,RAID50,WINDOW4GB,SOFTERR,SGMAP64,ALARM,NONDASD> aacp0: <SCSI Passthrough Bus> on aac0 .. aacd0: <RAID 1 (Mirror)> on aac0 aacd0: 34998MB (71677440 sectors) aacd1: <RAID 0/1> on aac0 aacd1: 140188MB (287105024 sectors) aac0: Error 5 sending GetDeviceProbeInfo command aac0: Error 5 sending GetDeviceProbeInfo command aac0: Error 5 sending GetDeviceProbeInfo command (probe6:aacp0:0:3:1): AutoSense Failed (probe0:aacp0:0:0:1): AutoSense Failed (probe2:aacp0:0:3:2): AutoSense Failed (probe6:aacp0:0:0:2): AutoSense Failed aac0: Error 5 sending GetDeviceProbeInfo command (probe2:aacp0:0:3:3): AutoSense Failed (probe5:aacp0:0:0:3): AutoSense Failed aac0: Error 5 sending GetDeviceProbeInfo command (probe2:aacp0:0:3:4): AutoSense Failed (probe5:aacp0:0:0:4): AutoSense Failed aac0: Error 5 sending GetDeviceProbeInfo command (probe2:aacp0:0:3:5): AutoSense Failed aac0: Error 5 sending GetDeviceProbeInfo command (probe5:aacp0:0:0:5): AutoSense Failed (probe2:aacp0:0:3:6): AutoSense Failed (probe1:aacp0:0:0:6): AutoSense Failed (probe2:aacp0:0:3:7): AutoSense Failed (probe1:aacp0:0:0:7): AutoSense Failed ses0 at aacp0 bus 0 target 8 lun 0 ses0: <SUPER GEM359 REV001 1.09> Fixed unknown SCSI-2 device ses0: 3.300MB/s transfers ses0: SAF-TE Compliant Device pass0 at aacp0 bus 0 target 0 lun 0 pass0: <FUJITSU MAU3036NC 0102> Fixed unknown SCSI-3 device pass0: 160.000MB/s transfers (80.000MHz, offset 255, 16bit) pass1 at aacp0 bus 0 target 1 lun 0 pass1: <FUJITSU MAU3036NC 0102> Fixed unknown SCSI-3 device pass1: 160.000MB/s transfers (80.000MHz, offset 127, 16bit) pass2 at aacp0 bus 0 target 2 lun 0 pass2: <FUJITSU MAT3073NC 0107> Fixed unknown SCSI-3 device pass2: 160.000MB/s transfers (80.000MHz, offset 127, 16bit) pass3 at aacp0 bus 0 target 3 lun 0 pass3: <FUJITSU MAT3073NC 0107> Fixed unknown SCSI-3 device pass3: 160.000MB/s transfers (80.000MHz, offset 255, 16bit) pass4 at aacp0 bus 0 target 4 lun 0 pass4: <FUJITSU MAT3073NC 0107> Fixed unknown SCSI-3 device pass4: 160.000MB/s transfers (80.000MHz, offset 127, 16bit) pass5 at aacp0 bus 0 target 5 lun 0 pass5: <FUJITSU MAT3073NC 0107> Fixed unknown SCSI-3 device pass5: 160.000MB/s transfers (80.000MHz, offset 127, 16bit) >How-To-Repeat: Install freebsd 5.4R on adaptec scsi 2130S (Raid 1 mirror 2hdd and Raid 10 4hdd) >Fix: It is possible to disable aacp device in a kernel but then I cannot use pass-thru. >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200506040841.j548fDD2001642>