From owner-freebsd-questions Wed Nov 15 8:16:29 2000 Delivered-To: freebsd-questions@freebsd.org Received: from epcot.revenio.com (unknown [209.202.137.125]) by hub.freebsd.org (Postfix) with SMTP id 5855C37B4D7 for ; Wed, 15 Nov 2000 08:16:20 -0800 (PST) Received: (qmail 37495 invoked from network); 15 Nov 2000 16:16:19 -0000 Received: from unknown (HELO gaston) (10.0.3.49) by epcot.revenio.com with SMTP; 15 Nov 2000 16:16:19 -0000 Message-ID: <000d01c04f1f$6379a1b0$3103000a@gaston> Reply-To: "Nicholas Basila" From: "Nicholas Basila" To: Cc: References: Subject: Re: Compaq ProLiant 3000 SMP and Ports Collection through HTTP firewa ll questions... Date: Wed, 15 Nov 2000 11:16:16 -0500 Organization: Revenio, Inc. MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi Geoff, I installed it on a dual processor Proliant 1850R. You have to make a change in the EISA utility, or whatever they call that system utility. There is an option in there for setting system tables to full mapped. I had to change that in order for FreeBSD 4.1 to boot with an SMP kernel. Here is the kernel config file from that server: # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.8 2000/07/20 02:51:02 msmith Exp $ machine i386 #cpu I386_CPU #cpu I486_CPU #cpu I586_CPU cpu I686_CPU ident GENERIC maxusers 64 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] #options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev # To make an SMP kernel, the next two are needed options SMP # Symmetric MultiProcessor Kernel options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): options NCPU=2 # number of CPUs options NBUS=4 # number of busses options NAPIC=2 # number of IO APICs options NINTR=32 # number of INTs options NSWAPDEV=20 device isa device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices # SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #device amd # AMD 53C974 (Teckram DC-390(T)) #device dpt # DPT Smartcache - See LINT for options! #device isp # Qlogic family device ncr # NCR/Symbios Logic device sym # NCR/Symbios Logic (newer chipsets) options SYM_SETUP_LP_PROBE_MAP=0x40 # Allow ncr to attach legacy NCR devices when # both sym and ncr are configured device adv0 at isa? device adw device bt0 at isa? device aha0 at isa? device aic0 at isa? # SCSI peripherals device scbus # SCSI bus (required) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) # RAID controllers device ida # Compaq Smart RAID device amr # AMI MegaRAID device mlx # Mylex DAC960 family device twe # 3ware Escalade # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) #device apm0 at nexus? disable flags 0x20 # Advanced Power Management # PCCARD (PCMCIA) support #device card #device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000 #device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 disable # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer #device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') #device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device tx # SMC 9432TX (83c170 ``EPIC'') #device vx # 3Com 3c590, 3c595 (``Vortex'') #device wx # Intel Gigabit Ethernet Card (``Wiseman'') # PCI Ethernet NICs that use the common MII bus controller code. device miibus # MII bus support #device dc # DEC/Intel 21143 and various workalikes #device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') device sis # Silicon Integrated Systems SiS 900/SiS 7016 device ste # Sundance ST201 (D-Link DFE-550TX) device tl # Texas Instruments ThunderLAN #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 device ex device ep # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attatement needed # and resources will always be dynamically assigned by the pccard code. #device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those paremeters here. #device an # Xircom Ethernet #device xe # The probe order of these is presently determined by i386/isa/isa_compat.c. #device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 #device fe0 at isa? port 0x300 #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 irq 10 drq 0 #device cs0 at isa? port 0x300 #device sn0 at isa? port 0x300 irq 10 # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif 4 # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support #device uhci # UHCI PCI->USB interface #device ohci # OHCI PCI->USB interface #device usb # USB Bus (required) #device ugen # Generic #device uhid # "Human Interface Devices" #device ukbd # Keyboard #device ulpt # Printer #device umass # Disks/Mass storage - Requires scbus and da #device ums # Mouse # USB Ethernet, requires mii #device aue # ADMtek USB ethernet #device cue # CATC USB ethernet #device kue # Kawasaki LSI USB ethernet Good luck. It runs quite well on the Compaq hardware. Nicholas > > > -----Original Message----- > From: Sloan, Geoff [mailto:Geoff.Sloan@COMPAQ.com] > Sent: Wednesday, November 15, 2000 10:49 AM > To: freebsd-questions@FreeBSD.ORG > Subject: Compaq ProLiant 3000 SMP and Ports Collection through HTTP > firewa ll questions... > > > In a world full of Red Hat here at Compaq, I'm trying to install FreeBSD 4.1 > on a ProLiant 3000 (dual 500MHz, Smart Array 3200 controller) in my office. > I've gotten the OS installed, but was curious as to how I'd go about > building an SMP kernel, or if it's even possible/advisable on this system. > It's been eons since I've built a kernel. :P All of the sources are > installed, so if there's a way to do it, I shouldn't have a problem. > > Second issue. I'm behind an HTTP proxy here at Compaq, and I would very > much like to use FTP to get the latest ports via the ports collection. How > would I go about setting up the ports collection to use the proxy correctly? > Any and all help is greatly appreciated. > > Thanks, > Geoff Sloan > Systems Engineer > Insight Management QA > Industry Standard Server Division > COMPAQ Computer Corporation > Phone: (281) 518-7292 > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message