Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 27 Mar 2002 11:23:55 -0600
From:      "Dave Brancato" <dave.brancato@cyberedge.net>
To:        <freebsd-hackers@freebsd.org>
Cc:        <freebsd-questions@freebsd.org>, <freebsd-net@freebsd.org>, <freebsd-current@freebsd.org>, <freebsd-user-groups@freebsd.org>
Subject:   Adaptec NIC and Netfinity
Message-ID:  <000001c1d5b4$2c5bd550$d120a8c0@corp.cyberedge.net>

Next in thread | Raw E-Mail | Index | Archive | Help
Hello I am having some problems with an Adaptec 62044 network card (quad
NIC), the first three interfaces initialize but then the last fails. I
have compiled in the starfire driver with my kernel using the line:
device          sf              # Adaptec AIC-6915 (``Starfire'')
The hardware platform is on a IBM Netfinity 4000R. I have disabled any
PnP options in the bios and have also disabled floppy and com ports. I
am posting the output from the command "dmesg" and also the output of
"vmstat -I". Please CC:g00ru@cyberedge.net with any info. Thanks, Dave
Brancato

interrupt                   total       rate
ata1 irq15                      4          0
mux irq10                    2589          1
mux irq3                     1216          0
atkbd0 irq1                  2325          1
clk irq0                   145260         99
rtc irq8                   185939        127
Total                      337333        232


Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights
reserved. FreeBSD 4.5-RELEASE #0: Mon Mar 25 06:40:31 CST 2002
    root@:/usr/src/sys/compile/TAZ
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (645.66-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x681  Stepping = 1
 
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,
MCA,CM
OV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory  = 2147483648 (2097152K bytes)
avail memory = 2088800256 (2039844K bytes)
APIC_IO: MP table broken: 8259->APIC entry missing!
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
IOAPIC #0 intpin 16 -> irq 11
IOAPIC #0 intpin 17 -> irq 10
IOAPIC #0 intpin 18 -> irq 3
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  1, version: 0x00040011, at 0xfee00000  cpu1 (AP):
apic id:  0, version: 0x00040011, at 0xfee00000  io0 (APIC): apic id:
14, version: 0x00170011, at 0xfec00000 Preloaded elf kernel "kernel" at
0xc02e5000. Preloaded userconfig_script "/boot/kernel.conf" at
0xc02e509c. Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443GX host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <Intel 82443GX (440 GX) PCI-PCI (AGP) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib2
pci1: <Chips & Technologies 69000 SVGA controller> at 0.0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 Timecounter
"PIIX"  frequency 3579545 Hz 3 on pci0 ffff,0xfebff000-0xfebfffff irq 3
at device 17.0 on pci0
fxp0: Ethernet address 00:06:29:de:c2:fb
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ffff,0xfebfe000-0xfebfefff irq 10 at device 18.0 on pci0
fxp1: Ethernet address 00:06:29:de:c2:fa
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib3: <DEC 21152 PCI-PCI bridge> at device 20.0 on pci0
pci2: <PCI bus> on pcib3
0fff irq 10 at device 14.0 on pci2
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs
pcib4: <DEC 21154 PCI-PCI bridge> at device 15.0 on pci2
pci3: <PCI bus> on pcib4
ff irq 11 at device 4.0 on pci3
sf0: Ethernet address: 00:00:d1:ee:08:a1
miibus2: <MII bus> on sf0
ukphy0: <Generic IEEE 802.3u media interface> on miibus2
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ff irq 10
at device 5.0 on pci3
sf1: Ethernet address: 00:00:d1:ee:08:a2
miibus3: <MII bus> on sf1
ukphy1: <Generic IEEE 802.3u media interface> on miibus3
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ff irq 3
at device 6.0 on pci3
sf2: Ethernet address: 00:00:d1:ee:08:a3
miibus4: <MII bus> on sf2
ukphy2: <Generic IEEE 802.3u media interface> on miibus4
ukphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ff at
device 7.0 on pci3
pci_cfgintr: can't route an interrupt to 3:7 INTA
sf3: couldn't map interrupt
device_probe_and_attach: sf3 attach returned 6
pcib1: <Intel 82443GX host to AGP bridge> on motherboard
pci4: <PCI bus> on pcib1
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IP Filter: v3.4.20 initialized.  Default = pass all, Logging = enabled
SMP: AP CPU #1 Launched!
acd0: CDROM <CRN-8241B> at ata1-master using PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM-PSG ST318275LW    !# 0350> Fixed Direct Access SCSI-2 device
da0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing
Enabled
da0: 17357MB (35548320 512 byte sectors: 255H 63S/T 2212C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <IBM-PSG ST318275LW    !# 0350> Fixed Direct Access SCSI-2 device
da1: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing
Enabled
da1: 17357MB (35548320 512 byte sectors: 255H 63S/T 2212C)



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-net" in the body of the message




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?000001c1d5b4$2c5bd550$d120a8c0>