Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 20 Aug 2003 05:05:11 +0200
From:      "Per olof Ljungmark" <peo@intersonic.se>
To:        freebsd-questions@freebsd.org
Subject:   adaptec 2120S on 4.7
Message-ID:  <3F42E567.9070704@intersonic.se>

next in thread | raw e-mail | index | archive | help
Hi,

installed a adaptec 2120 raid card with four seagate 36gb drives. fdisk 
could create a partition but disklabel fails:

mount: /dev/aacd0s1e on /var/log: incorrect super block

from dmesg:
aac0: <Adaptec SCSI RAID 2120S> mem 0xc0000000-0xc3ffffff irq 5 at 
device 16.0 on pci0
aac0: i960RX 100MHz, 48MB cache memory, optional battery present
aac0: Kernel 4.0-0, Build 6003, S/N b85076
aacp0: <SCSI Passthrough Bus> on aac0
----
aacd0: <RAID 5> on aac0
aacd0: 104996MB (215032320 sectors)
aac0: **Monitor** SCSI bus reset issued on channel 0
aac0: **Monitor** Drive 0:0:0 online on container 0:
aac0: **Monitor** Drive 0:1:0 online on container 0:
aac0: **Monitor** Drive 0:2:0 online on container 0:
aac0: **Monitor** Drive 0:3:0 online on container 0:
pass2 at aacp0 bus 0 target 0 lun 0
pass2: <SEAGATE ST336607LC 0005> Fixed unknown SCSI-3 device
pass2: 10.000MB/s transfers (5.000MHz, offset 63, 16bit)
pass3 at aacp0 bus 0 target 1 lun 0
pass3: <SEAGATE ST336607LC 0005> Fixed unknown SCSI-3 device
pass3: 10.000MB/s transfers (5.000MHz, offset 63, 16bit)
pass4 at aacp0 bus 0 target 2 lun 0
pass4: <SEAGATE ST336607LC 0005> Fixed unknown SCSI-3 device
pass4: 10.000MB/s transfers (5.000MHz, offset 63, 16bit)
pass5 at aacp0 bus 0 target 3 lun 0
pass5: <SEAGATE ST336607LC 0005> Fixed unknown SCSI-3 device
pass5: 10.000MB/s transfers (5.000MHz, offset 63, 16bit)

any ideas?

thanks,
per olof



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3F42E567.9070704>