Date: Wed, 10 Jan 2001 16:26:20 +0300 From: Odhiambo Washington <wash@iconnect.co.ke> To: FBSD-Q <freebsd-questions@freebsd.org> Subject: Adding Disks Message-ID: <20010110162620.A29601@poeza.iconnect.co.ke>
next in thread | raw e-mail | index | archive | help
Buddies, Below is my /etc/fstab I have 4 disks in my box, 2 IDE and 2 SCSI...I just added the SCSI disk and ended up with enough doubts (uncertainities) which I hope someone can help me with. I had expected that the new disk would go in as da1-something, because from my dmesg, this is what I got from dmesg. Now my concern: All the methods outlined in handbook/disks-adding.html could not work for me. Well I went via /stand/sysinstall about 5 times and just could not get things going....I created the partition (fully dedicated), labelled and got da1s1e and specified the mount point but the thing wouldn't hear of newfs!! So what did I do? newfs _ARGS_ /dev/rda1s1c My question: why would it not accept /dev/da1s1e ???? Why does it have to be rda1s1c?? If someone can enlighten me...I have nothing on that disk so I can go over the process again just to be conversant with this chapter.. Thanks #### ad0: 4110MB <QUANTUM FIREBALL CR4.3A> [14848/9/63] at ata0-master UDMA33 ad1: 8063MB <SAMSUNG SV0842D> [16383/16/63] at ata0-slave UDMA33 acd0: CDROM <CD-ROM Philips PCA402CDA> at ata1-master using PIO4 Waiting 15 seconds for SCSI devices to settle da2 at vpo0 bus 0 target 6 lun 0 da2: <IOMEGA ZIP 100 P.04> Removable Direct Access SCSI-2 device da2: 96MB (196608 512 byte sectors: 64H 32S/T 96C) >>>da1 at ahc0 bus 0 target 1 lun 0 >>>da1: <SEAGATE ST51080N 0958> Fixed Direct Access SCSI-2 device >>>da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled >>>da1: 1030MB (2109840 512 byte sectors: 255H 63S/T 131C) da0 at ahc0 bus 0 target 0 lun 0 da0: <SEAGATE ST15150N 0022> Fixed Direct Access SCSI-2 device da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da0: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C) Mounting root from ufs:/dev/ad0s2a # Device Mountpoint FStype Options Dump Pass# /dev/ad0s2b none swap sw 0 0 /dev/ad0s2a / ufs rw 1 1 /dev/ad0s2f /usr ufs rw 2 2 /dev/ad0s2e /var ufs rw 2 2 /dev/ad0s1 /win msdos rw 0 0 /dev/acd0c /cdrom cd9660 ro,noauto 0 0 /dev/da2s4 /zip msdos rw,noauto,longnames 0 0 /dev/da2s4 /zipu ufs rw,noauto 0 0 #/dev/da1s1e /2usr ufs rw 2 2 /dev/rda1s1c /2usr ufs rw 2 2 proc /proc procfs rw 0 0 -Wash -- Odhiambo Washington To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010110162620.A29601>