Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 1 Aug 1995 10:04:35 +0200
From:      Lars koeller <uphya001@odie.physik2.uni-rostock.de>
To:        freebsd-questions@freefall.cdrom.com
Cc:        uphya001@odie.physik2.uni-rostock.de
Subject:   /dev/cuaa1 looses inital setup (dcfd)!
Message-ID:  <199508010804.KAA06670@odie.physik2.uni-rostock.de>

next in thread | raw e-mail | index | archive | help
   Hello!

      I've compiled the dcfd out of the xntpd package in 2.0.5R. The daemon
   works well with    my receiver but  after   2  or three  days,  suddenly
   everything is  dead.  I suppose  the  /dev/cuaa1 device drops  the power
   lines (DTR:+ and TxD:-) but I don't know why. This behaviour occurs also
   with 1.1.5.1R box.

      Also locking with 'stty -f /dev/cuala1 cs8 cread clocal parenb ignpar'
   which are the settings in dcfd.c doesn't help.

   Any suggestions or similar problems?

   Regards

   Lars

--
______________________________________________________________________________
Lars Köller                        E-Mail: 
University of Rostock (Germany)       lars.koeller@odie.physik2.Uni-Rostock.DE
Fachbereich Physik
Universitätsplatz 3		   Phone:  +49 381/498-1665 or 498-1648
18051 Rostock                      Fax:    +49 381/498-1667




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199508010804.KAA06670>