From owner-freebsd-questions  Mon May  1 10:33:38 1995
Return-Path: questions-owner
Received: (from majordom@localhost)
          by freefall.cdrom.com (8.6.10/8.6.6) id KAA01253
          for questions-outgoing; Mon, 1 May 1995 10:33:38 -0700
Received: from chow.cisco.com (chow.cisco.com [171.69.3.217])
          by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id KAA01246
          for <questions@FreeBSD.org>; Mon, 1 May 1995 10:33:35 -0700
Received: (ploo@localhost) by chow.cisco.com (8.6.8+c/8.6.5) id KAA08841; Mon, 1 May 1995 10:33:01 -0700
From: "Patrick S. Loo" <ploo@cisco.com>
Message-Id: <199505011733.KAA08841@chow.cisco.com>
Subject: installation failed, can anyone help?
To: questions@FreeBSD.org
Date: Mon, 1 May 95 10:33:01 PDT
Cc: ploo@cisco.com (Patrick S. Loo)
X-Mailer: ELM [version 2.3 PL11]
Sender: questions-owner@FreeBSD.org
Precedence: bulk

Hi,

I try to install FreeBSD 2.0 onto my PC from CD. I tried on two PC's and both failed with
a different reason. Please help me out.

1) Intel 386 PC with Adaptec SCSI controller. If I assign 20MB to "/", the system
   said "device full" when copying kernel to /mnt/kernel. If I assign 50MB or 100MB
   to "/" and tried it again, the system crashed with error messages: 
	bad block 65535
	mode= 0104525 inum 11521 fs= /mntn /mnt: bad block
	Panic: ffs-valloc: dup alloc

   The drive is a Maxtor XT-4380S and I use (318 cyl 64 hd 32 sect).

   What should I do to get this going? The system saw the HD, the CD, and the floppy drive.

2) AND 386 PC with WD IDE disk controller and a Future Domain Corp TMC-850MER SCSI
   controller for the CD-ROM drive. The system can load the initial software onto the
   hard disk but it did not see the CD-ROM (can't mount /dev/cd0). So, I cannot do
   much with the system.
   What can I do to fix this? 

Please help!
Thanks in advance!

ploo