From owner-freebsd-alpha Mon Nov 1 18:11: 7 1999 Delivered-To: freebsd-alpha@freebsd.org Received: from mail.cybcon.com (mail.cybcon.com [216.190.188.5]) by hub.freebsd.org (Postfix) with ESMTP id D9A3B152F2 for ; Mon, 1 Nov 1999 18:10:54 -0800 (PST) (envelope-from wwoods@cybcon.com) Received: from freebsd.cybcon.com (william@pm3b-12.cybcon.com [205.147.75.77]) by mail.cybcon.com (8.9.0/8.9.0) with SMTP id SAA03272 for ; Mon, 1 Nov 1999 18:10:52 -0800 (PST) From: william woods Reply-To: wwoods@cybcon.com To: freebsd-alpha@freebsd.org Subject: Problem booting new SCSI drive in Alpha..... Date: Mon, 1 Nov 1999 16:59:09 -0800 X-Mailer: KMail [version 1.0.28] Content-Type: text/plain MIME-Version: 1.0 Message-Id: <99110117084700.00324@freebsd.cybcon.com> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-alpha@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I just put a new SCSI drive in my Alphastation 200 4/233. I installed from CDrom and that was fine, but after the install is finished, it says system will halt. That is fine. When I get to the SRM console I type "boot dka0" but this is what I get: (boot dka0.0.6.0 -flags a) block 0 of dka0.0.0.6.0 is a valid boot block reading 15 blocks from dka0.0.0.6.0 bootstrap code read in base = 1f3000, image start = 0, image_bytes = 1e00 initializing HWRPB at 2000 initializing page table at 1e4000 initializing machiene state setting affinity to the primary CPU jumping to the bootstrap code loading /boot/loader Can't open file /boot/loader halted CPU 0 halt code = 5 Halt instruction executed PC = 200000038 any help with this would be appreciated. also, for what its worth, here is a copy of "show device" as it relates to my SCSI drives. dka0.0.0.6.0 DKA0 WDIGTL ENTERPRISE 1.91 dka500.5.0.6.0 DKA500 COMPAQ CD_ROM CR-503BCQ 1.1i -- William Woods FreeBSD 3.3-Stable wwoods@cybcon.com wwoods@or.freei.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message