Date: Thu, 22 Apr 2004 10:44:10 +0300 From: Gregory Edigarov <greg@profi.kharkov.ua> To: freebsd-current@freebsd.org Subject: Re: where is my sio1?(again) Message-ID: <20040422074410.GA21837@profi.kharkov.ua> In-Reply-To: <20040421171030.GA12125@profi.kharkov.ua> References: <20040421171030.GA12125@profi.kharkov.ua>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 21 Apr 2004, Gregory Edigarov wrote:
> Hello,
>
> I have an Asus P4C800 with 2 integrated COM ports.
> They are enabled in BIOS and connected. However FreeBSD-current
> (today's build) was only able to found sio0.
> What can I do? They both are enabled in /boot/device.hints.
Tim Robbins wanted me to post a verbose dmesg, the system has built
just two minutes before:
Hyperthreading: 2 logical CPUs
real memory = 536018944 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000826000 - 0x000000001f602fff, 517853184 bytes (126429 pages)
avail memory = 518922240 (494 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f0000
bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x31
pnpbios: Found PnP BIOS data at 0xc00f5270
pnpbios: Entry = f0000:5e5a Rev = 1.0
Other BIOS signatures found:
mem: <memory & I/O>
Pentium Pro MTRR support enabled
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
cpu0 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMRSDT> on motherboard
acpi0: [GIANT-LOCKED]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000090
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25788086)
pcibios: BIOS version 2.10
Found $PIR table, 11 entries at 0xc00f5130
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 2 8 A 0x68 3 4 5 6 7 10 11 12 14 15
embedded 0 31 A 0x62 3 4 5 6 7 10 11 12 14 15
embedded 0 31 B 0x61 3 4 5 6 7 10 11 12 14 15
embedded 0 29 A 0x60 3 4 5 6 7 10 11 12 14 15
embedded 0 29 B 0x63 3 4 5 6 7 10 11 12 14 15
embedded 0 29 C 0x62 3 4 5 6 7 10 11 12 14 15
embedded 0 29 D 0x6b 3 4 5 6 7 10 11 12 14 15
embedded 0 1 A 0x60 3 4 5 6 7 10 11 12 14 15
embedded 0 1 B 0x61 3 4 5 6 7 10 11 12 14 15
slot 1 2 9 A 0x69 3 4 5 6 7 10 11 12 14 15
slot 1 2 9 B 0x6a 3 4 5 6 7 10 11 12 14 15
slot 1 2 9 C 0x6b 3 4 5 6 7 10 11 12 14 15
slot 1 2 9 D 0x68 3 4 5 6 7 10 11 12 14 15
slot 2 2 10 A 0x6a 3 4 5 6 7 10 11 12 14 15
slot 2 2 10 B 0x6b 3 4 5 6 7 10 11 12 14 15
slot 2 2 10 C 0x68 3 4 5 6 7 10 11 12 14 15
slot 2 2 10 D 0x69 3 4 5 6 7 10 11 12 14 15
slot 3 2 11 A 0x6b 3 4 5 6 7 10 11 12 14 15
slot 3 2 11 B 0x68 3 4 5 6 7 10 11 12 14 15
slot 3 2 11 C 0x69 3 4 5 6 7 10 11 12 14 15
slot 3 2 11 D 0x6a 3 4 5 6 7 10 11 12 14 15
embedded 0 1 A 0x62 3 4 5 6 7 10 11 12 14 15
slot 4 2 12 A 0x68 3 4 5 6 7 10 11 12 14 15
slot 4 2 12 B 0x69 3 4 5 6 7 10 11 12 14 15
slot 4 2 12 C 0x6a 3 4 5 6 7 10 11 12 14 15
slot 4 2 12 D 0x6b 3 4 5 6 7 10 11 12 14 15
slot 5 2 13 A 0x69 3 4 5 6 7 10 11 12 14 15
slot 5 2 13 B 0x6a 3 4 5 6 7 10 11 12 14 15
slot 5 2 13 C 0x6b 3 4 5 6 7 10 11 12 14 15
slot 5 2 13 D 0x68 3 4 5 6 7 10 11 12 14 15
embedded 2 5 A 0x6a 3 4 5 6 7 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 31 func 1
AcpiOsDerivePciId: bus 0 dev 31 func 2
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
\\_SB_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.31.0
\\_SB_.LNKB irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.31.1
\\_SB_.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.29.0
\\_SB_.LNKD irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.29.1
\\_SB_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.29.2
\\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.29.3
\\_SB_.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.0
\\_SB_.LNKB irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.1
ACPI PCI link before setting link priority:
ACPI PCI link before fixup for boot-disabled links:
ACPI PCI link after fixup for boot-disabled links:
ACPI PCI link arbitrated configuration:
\\_SB_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.31.0
\\_SB_.LNKB irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.31.1
\\_SB_.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.29.0
\\_SB_.LNKD irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.29.1
\\_SB_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.29.2
\\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.29.3
\\_SB_.LNKA irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.0
\\_SB_.LNKB irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.1
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base f4000000, size 26, enabled
found-> vendor=0x8086, dev=0x2578, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2579, revid=0x02
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000ef00, size 5, enabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.LNKA)
pcib0: slot 29 INTA is routed to irq 10
found-> vendor=0x8086, dev=0x24d2, revid=0x02
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[20]: type 4, range 32, base 0000ef20, size 5, enabled
pcib0: matched entry for 0.29.INTB (src \\_SB_.LNKD)
pcib0: slot 29 INTB is routed to irq 5
found-> vendor=0x8086, dev=0x24d4, revid=0x02
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
map[10]: type 1, range 32, base febffc00, size 10, enabled
pcib0: matched entry for 0.29.INTD (src \\_SB_.LNKH)
pcib0: slot 29 INTD is routed to irq 11
found-> vendor=0x8086, dev=0x24dd, revid=0x02
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
powerspec 2 supports D0 D3 current D0
found-> vendor=0x8086, dev=0x244e, revid=0xc2
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24d0, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 00000000, size 3, enabled
map[14]: type 4, range 32, base 00000000, size 2, enabled
map[18]: type 4, range 32, base 00000000, size 3, enabled
map[1c]: type 4, range 32, base 00000000, size 2, enabled
map[20]: type 4, range 32, base 0000fc00, size 4, enabled
map[24]: type 1, range 32, base 00000000, size 10, memory disabled
found-> vendor=0x8086, dev=0x24db, revid=0x02
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 00000400, size 5, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB)
pcib0: slot 31 INTB is routed to irq 10
found-> vendor=0x8086, dev=0x24d3, revid=0x02
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
agp0: <Intel 82875P host to AGP bridge> mem 0xf4000000-0xf7ffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf4000000
agp0: allocating GATT for aperture of size 64M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xc000-0xcfff
pcib1: memory decode 0xfe900000-0xfe9fffff
pcib1: prefetched decode 0xe7f00000-0xefefffff
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base e8000000, size 26, enabled
pcib1: device (null) requested decoded memory range 0xe8000000-0xebffffff
map[14]: type 4, range 32, base 0000c000, size 8, enabled
pcib1: device (null) requested decoded I/O range 0xc000-0xc0ff
map[18]: type 1, range 32, base fe9fc000, size 14, enabled
pcib1: device (null) requested decoded memory range 0xfe9fc000-0xfe9fffff
found-> vendor=0x1002, dev=0x5446, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x02b0, cachelnsz=4 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xef00-0xef1f irq 10 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xef00
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xef20-0xef3f irq 5 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xef20
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xd000-0xdfff
pcib2: memory decode 0xfea00000-0xfeafffff
pcib2: prefetched decode 0xfff00000-0xfffff
pcib2: Subtractively decoded bridge.
ACPI PCI link initial configuration:
\\_SB_.LNKE irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.8.0
\\_SB_.LNKF irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.9.0
\\_SB_.LNKG irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.9.1
\\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.9.2
\\_SB_.LNKE irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.9.3
\\_SB_.LNKG irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.10.0
\\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.10.1
\\_SB_.LNKE irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.10.2
\\_SB_.LNKF irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.10.3
\\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.11.0
\\_SB_.LNKE irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.11.1
\\_SB_.LNKF irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.11.2
\\_SB_.LNKG irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.11.3
\\_SB_.LNKE irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.12.0
\\_SB_.LNKF irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.12.1
\\_SB_.LNKG irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.12.2
\\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.12.3
\\_SB_.LNKF irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.13.0
\\_SB_.LNKG irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.13.1
\\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.13.2
\\_SB_.LNKE irq 0: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.13.3
\\_SB_.LNKG irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.5.0
ACPI PCI link before setting link priority:
\\_SB_.LNKE:
interrupts: 3 4 5 6 7 10 11 12 14 15
penalty: 2210 2210 1910 2210 2210 1810 1810 2210 11210 11210
references: 6
priority: 0
\\_SB_.LNKF:
interrupts: 3 4 5 6 7 10 11 12 14 15
penalty: 2210 2210 1910 2210 2210 1810 1810 2210 11210 11210
references: 5
priority: 0
ACPI PCI link before fixup for boot-disabled links:
\\_SB_.LNKE:
interrupts: 3 4 5 6 7 10 11 12 14 15
penalty: 2210 2210 1910 2210 2210 1810 1810 2210 11210 11210
references: 6
priority: 23400
\\_SB_.LNKF:
interrupts: 3 4 5 6 7 10 11 12 14 15
penalty: 2210 2210 1910 2210 2210 1810 1810 2210 11210 11210
references: 5
priority: 19500
ACPI PCI link after fixup for boot-disabled links:
ACPI PCI link arbitrated configuration:
\\_SB_.LNKE irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.8.0
\\_SB_.LNKF irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.9.0
\\_SB_.LNKG irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.9.1
\\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.9.2
\\_SB_.LNKE irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.9.3
\\_SB_.LNKG irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.10.0
\\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.10.1
\\_SB_.LNKE irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.10.2
\\_SB_.LNKF irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.10.3
\\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.11.0
\\_SB_.LNKE irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.11.1
\\_SB_.LNKF irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.11.2
\\_SB_.LNKG irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.11.3
\\_SB_.LNKE irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.12.0
\\_SB_.LNKF irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.12.1
\\_SB_.LNKG irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.12.2
\\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.12.3
\\_SB_.LNKF irq 10: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.13.0
\\_SB_.LNKG irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.13.1
\\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.13.2
\\_SB_.LNKE irq 11: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.13.3
\\_SB_.LNKG irq 5: [ 3 4 5 6 7 10 11 12 14 15] low,level,sharable 2.5.0
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 1, range 32, base feaf8000, size 14, enabled
pcib2: device (null) requested decoded memory range 0xfeaf8000-0xfeafbfff
map[14]: type 4, range 32, base 0000d800, size 8, enabled
pcib2: device (null) requested decoded I/O range 0xd800-0xd8ff
pcib2: matched entry for 2.5.INTA (src \\_SB_.LNKG)
pcib2: slot 5 INTA is routed to irq 5
found-> vendor=0x10b7, dev=0x1700, revid=0x12
bus=2, slot=5, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x02b0, cachelnsz=4 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x17 (5750 ns), maxlat=0x1f (7750 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000d400, size 8, enabled
pcib2: device (null) requested decoded I/O range 0xd400-0xd4ff
map[14]: type 1, range 32, base feaff000, size 12, enabled
pcib2: device (null) requested decoded memory range 0xfeaff000-0xfeafffff
pcib2: matched entry for 2.11.INTA (src \\_SB_.LNKH)
pcib2: slot 11 INTA is routed to irq 11
found-> vendor=0x1077, dev=0x1080, revid=0x01
bus=2, slot=11, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0290, cachelnsz=4 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
skc0: <3Com 3C940 Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeaf8000-0xfeafbfff irq 5 at device 5.0 on pci2
skc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xfeaf8000
skc0: 3Com Gigabit LOM (3C940)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: bpf attached
sk0: Ethernet address: 00:0e:a6:4a:0a:5c
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
skc0: [GIANT-LOCKED]
Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 2.7
isp0: <Qlogic ISP 1080 PCI SCSI Adapter> port 0xd400-0xd4ff mem 0xfeaff000-0xfeafffff irq 11 at device 11.0 on pci2
isp0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd400
isp0: using I/O space register mapping
isp0: [GIANT-LOCKED]
isp0: bus 0 is in Single-Ended Mode
isp0: Board Type 1080, Chip Revision 0x1, resident F/W Revision 2.13.5
isp0: Last F/W revision was 2.13.5
isp0: 839 max I/O commands supported
isp0: Initiator ID is 7 on Channel 0
isp0: Enabled FW features (0xa)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> at device 31.1 on pci0
atapci0: Lazy allocation of 0x10 bytes rid 0x20 type 4 at 0
atapci0: Lazy allocation of 0x8 bytes rid 0x10 type 4 at 0x1f0
atapci0: Lazy allocation of 0x4 bytes rid 0x14 type 4 at 0x3f8
ata0: reset tp1 mask=03 ostat0=00 ostat1=00
ata0-master: stat=0x01 err=0x01 lsb=0x01 msb=0x01
ata0-slave: stat=0x01 err=0x01 lsb=0x01 msb=0x01
ata0: reset tp2 mask=03 stat0=01 stat1=01 devices=0x0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
atapci0: Lazy allocation of 0x8 bytes rid 0x18 type 4 at 0x170
atapci0: Lazy allocation of 0x4 bytes rid 0x1c type 4 at 0x378
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1-master: stat=0x01 err=0x01 lsb=0x01 msb=0x01
ata1-slave: stat=0x01 err=0x01 lsb=0x01 msb=0x01
ata1: reset tp2 mask=03 stat0=01 stat1=01 devices=0x0
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
unknown: not probed (disabled)
sio0: irq maps: 0x1 0x9 0x1 0x1
sio0 port 0x2f8-0x2ff irq 3 on acpi0
sio0: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xcb000-0xcd7ff,0xc0000-0xcafff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 2405468180 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
Waiting 15 seconds for SCSI devices to settle
isp0: driver initiated bus reset of bus 0
(probe0:isp0:0:0:0): Retrying Command
pass0 at isp0 bus 0 target 0 lun 0
pass0: <FUJITSU MXF3364LC 0319> Fixed Direct Access SCSI-2 device
pass0: Serial Number 50000807
GEOM: new disk da0
pass0: 3.300MB/s transfers
da0 at isp0 bus 0 target 0 lun 0
da0: <FUJITSU MXF3364LC 0319> Fixed Direct Access SCSI-2 device
da0: Serial Number 50000807
da0: 3.300MB/s transfers
da0: 34732MB (71132960 512 byte sectors: 255H 63S/T 4427C)
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:71119692
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da0s1, start 32256 length 36413282304 end 36413314559
GEOM: Configure da0s1a, start 0 length 268435456 end 268435455
GEOM: Configure da0s1b, start 268435456 length 1073741824 end 1342177279
GEOM: Configure da0s1c, start 0 length 36413282304 end 36413282303
GEOM: Configure da0s1d, start 1342177280 length 35071105024 end 36413282303
Mounting root from ufs:/dev/da0s1a
start_init: trying /sbin/init
tun0: bpf attached
---
These are my device.hints:
# $FreeBSD: src/sys/i386/conf/GENERIC.hints,v 1.13 2004/04/01 21:48:31 alfred Exp $
hint.fdc.0.at="isa"
hint.fdc.0.port="0x3F0"
hint.fdc.0.irq="6"
hint.fdc.0.drq="2"
hint.fd.0.at="fdc0"
hint.fd.0.drive="0"
hint.fd.1.at="fdc0"
hint.fd.1.drive="1"
hint.ata.0.at="isa"
hint.ata.0.port="0x1F0"
hint.ata.0.irq="14"
hint.ata.1.at="isa"
hint.ata.1.port="0x170"
hint.ata.1.irq="15"
hint.adv.0.at="isa"
hint.adv.0.disabled="1"
hint.bt.0.at="isa"
hint.bt.0.disabled="1"
hint.aha.0.at="isa"
hint.aha.0.disabled="1"
hint.aic.0.at="isa"
hint.aic.0.disabled="1"
hint.atkbdc.0.at="isa"
hint.atkbdc.0.port="0x060"
hint.atkbd.0.at="atkbdc"
hint.atkbd.0.irq="1"
hint.psm.0.at="atkbdc"
hint.psm.0.irq="12"
hint.vga.0.at="isa"
hint.sc.0.at="isa"
hint.sc.0.flags="0x100"
hint.vt.0.at="isa"
hint.vt.0.disabled="1"
hint.apm.0.disabled="1"
hint.apm.0.flags="0x20"
hint.pcic.0.at="isa"
# hint.pcic.0.irq="10" # Default to polling
hint.pcic.0.port="0x3e0"
hint.pcic.0.maddr="0xd0000"
hint.pcic.1.at="isa"
hint.pcic.1.irq="11"
hint.pcic.1.port="0x3e2"
hint.pcic.1.maddr="0xd4000"
hint.pcic.1.disabled="1"
hint.sio.0.at="isa"
hint.sio.0.port="0x3F8"
hint.sio.0.flags="0x10"
hint.sio.0.irq="4"
hint.sio.1.at="isa"
hint.sio.1.port="0x2F8"
hint.sio.1.flags="0x0"
hint.sio.1.irq="3"
hint.sio.2.at="isa"
hint.sio.2.disabled="1"
hint.sio.2.port="0x3E8"
hint.sio.2.irq="5"
hint.sio.3.at="isa"
hint.sio.3.disabled="1"
hint.sio.3.port="0x2E8"
hint.sio.3.irq="9"
hint.ppc.0.at="isa"
hint.ppc.0.irq="7"
hint.ed.0.at="isa"
hint.ed.0.disabled="1"
hint.ed.0.port="0x280"
hint.ed.0.irq="10"
hint.ed.0.maddr="0xd8000"
hint.cs.0.at="isa"
hint.cs.0.disabled="1"
hint.cs.0.port="0x300"
hint.sn.0.at="isa"
hint.sn.0.disabled="1"
hint.sn.0.port="0x300"
hint.sn.0.irq="10"
hint.ie.0.at="isa"
hint.ie.0.disabled="1"
hint.ie.0.port="0x300"
hint.ie.0.irq="10"
hint.ie.0.maddr="0xd0000"
hint.fe.0.at="isa"
hint.fe.0.disabled="1"
hint.fe.0.port="0x300"
hint.lnc.0.at="isa"
hint.lnc.0.disabled="1"
hint.lnc.0.port="0x280"
hint.lnc.0.irq="10"
hint.lnc.0.drq="0"
They are unchanged since the installation.
--
With best regards,
Gregory Edigarov
------------------------------------------------------------------------------
profi.kharkov.ua Systems Administrator
------------------------------------------------------------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040422074410.GA21837>