Date: Wed, 30 Sep 1998 14:42:09 -0500 From: "Mike Grommet" <mgrommet@insolwwb.net> To: <freebsd-questions@FreeBSD.ORG> Subject: DPT Raid hanging on newfs? Message-ID: <002601bdecaa$69b4e460$0cf896d0@work2.insolwwb.net>
next in thread | raw e-mail | index | archive | help
Hi guys. Trying to get freebsd 2.2.7 (distribution CD) up and running on a new server. We are trying to use a DPT PM3334UW controller and problems are occuring :) Any help here would be MOST appreciated. I sort of stuck my neck out here to use a free OS for this server (THEY wanted to use NT on it... *yuck*) But since I am admining the machine and I like freebsd, I won out :) The DPT card bios reports its own version as V003.EN The scsi card is ID7 on all 3 channels The drives are all id0 on each of the 3 channels. On bootup, the kernel sees the card as a DPT Type 3 model PM3334UW, firmware 07M0 on port b810 with write back cache it also reports that the kernel has the Collections Metrics enabled. It reports my disk geometry as 1106 cyls / 255 heads / 63 sectors, and 17767890 sectors I am using RAID V, with 3 4.5gig seagate cheetas 4LP I get to the menu just fine, and begin a novice installation... I tell it to use the entire disk, set it as bootable. I then partition the drive as such: 256M swap 128M / 256M /var and roughly 8 gig for /usr Ok, so it starts to do a newfs... it seems to create the / partition ok, although this goes by so quick I cant say for sure. It seems to copy all the device files to the drive... I noticed the error message: 3328 sectors in last cylinder unallocated. then it starts doing a newfs on the /usr partition... it ticks and ticks and ticks off the numbers... then gets to what I assume is the end, but never returns control to the install program... it just dies right there... HELP! What should I begin trying here? I'm definately lost when it comes to RAID anyway... any bios functions in the DPT controller setup that I should disable? Anyone have any ideas? Is there a knowledgeable individual @ DPT who is familiar with these controllers and FreeBSD? Their book that comes with the card doesnt even mention unix so.... Mike Grommet System Admin, and all around nice guy Internet Solutions, Inc. mgrommet@insolwwb.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?002601bdecaa$69b4e460$0cf896d0>