Date: Mon, 30 Mar 2015 17:08:12 +0800 From: =?gb2312?B?zuLK5cCk?= <wsk@gddsn.org.cn> To: net@freebsd.org Cc: "questions@freebsd.org ; stable@freebsd.org; current@freebsd.org" <questions@freebsd.org> Subject: BCM5709 controller attach returned failed Message-ID: <A283080D-E467-4259-9B41-AC81381257C3@gddsn.org.cn>
next in thread | raw e-mail | index | archive | help
hi, folks
I got bce0 attach returned 6 on my Freebsd 10.1-RELEASE-p8 server. It=A1=AF=
s a quad ports NIC.
any help?
bce0: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem =
0xd4000000-0xd5ffffff irq 18 at device 0.0 on pci6
bce0: /usr/src/sys/dev/bce/if_bce.c(1247): Management firmware enabled =
but not running!
bce0: /usr/src/sys/dev/bce/if_bce.c(3974): Firmware synchronization =
timeout! msg_data =3D 0x01020002
bce0: /usr/src/sys/dev/bce/if_bce.c(5057): Firmware did not complete =
initialization!
bce0: /usr/src/sys/dev/bce/if_bce.c(1305): Controller reset failed!
device_attach: bce0 attach returned 6
none6@pci0:6:0:0: class=3D0x020000 card=3D0x090614e4 =
chip=3D0x163914e4 rev=3D0x20 hdr=3D0x00
vendor =3D 'Broadcom Corporation'
device =3D 'NetXtreme II BCM5709 Gigabit Ethernet'
class =3D network
subclass =3D ethernet
BTW: the BCM5716 on board works anyway.
bce0@pci0:2:0:0: class=3D0x020000 card=3D0x02a31028 =
chip=3D0x163b14e4 rev=3D0x20 hdr=3D0x00
vendor =3D 'Broadcom Corporation'
device =3D 'NetXtreme II BCM5716 Gigabit Ethernet'
class =3D network
subclass =3D ethernet
bce1@pci0:2:0:1: class=3D0x020000 card=3D0x02a31028 =
chip=3D0x163b14e4 rev=3D0x20 hdr=3D0x00
vendor =3D 'Broadcom Corporation'
device =3D 'NetXtreme II BCM5716 Gigabit Ethernet'
class =3D network
subclass =3D ethernet
I don=A1=AFt understand that why attach returned 6 on bce0 on bootmesgs =
? and why bce0 and bce1 on board works finally?
--
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci4: <ACPI PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 0.0 on pci4
pci5: <PCI bus> on pcib2
pcib3: <PCI-PCI bridge> at device 2.0 on pci5
pci6: <PCI bus> on pcib3
bce0: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem =
0xd4000000-0xd5ffffff irq 18 at device 0.0 on pci6
bce0: /usr/src/sys/dev/bce/if_bce.c(1247): Management firmware enabled =
but not running!
bce0: /usr/src/sys/dev/bce/if_bce.c(3974): Firmware synchronization =
timeout! msg_data =3D 0x01020002
bce0: /usr/src/sys/dev/bce/if_bce.c(5057): Firmware did not complete =
initialization!
bce0: /usr/src/sys/dev/bce/if_bce.c(1305): Controller reset failed!
device_attach: bce0 attach returned 6
bce0: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem =
0xd6000000-0xd7ffffff irq 19 at device 0.1 on pci6
bce0: /usr/src/sys/dev/bce/if_bce.c(1247): Management firmware enabled =
but not running!
bce0: /usr/src/sys/dev/bce/if_bce.c(3974): Firmware synchronization =
timeout! msg_data =3D 0x01020002
bce0: /usr/src/sys/dev/bce/if_bce.c(5057): Firmware did not complete =
initialization!
bce0: /usr/src/sys/dev/bce/if_bce.c(1305): Controller reset failed!
device_attach: bce0 attach returned 6
pcib4: <PCI-PCI bridge> at device 4.0 on pci5
pci7: <PCI bus> on pcib4
bce0: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem =
0xd0000000-0xd1ffffff irq 16 at device 0.0 on pci7
bce0: /usr/src/sys/dev/bce/if_bce.c(1247): Management firmware enabled =
but not running!
bce0: /usr/src/sys/dev/bce/if_bce.c(3974): Firmware synchronization =
timeout! msg_data =3D 0x01020002
bce0: /usr/src/sys/dev/bce/if_bce.c(5057): Firmware did not complete =
initialization!
bce0: /usr/src/sys/dev/bce/if_bce.c(1305): Controller reset failed!
device_attach: bce0 attach returned 6
bce0: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem =
0xd2000000-0xd3ffffff irq 17 at device 0.1 on pci7
bce0: /usr/src/sys/dev/bce/if_bce.c(1247): Management firmware enabled =
but not running!
bce0: /usr/src/sys/dev/bce/if_bce.c(3974): Firmware synchronization =
timeout! msg_data =3D 0x01020002
bce0: /usr/src/sys/dev/bce/if_bce.c(5057): Firmware did not complete =
initialization!
bce0: /usr/src/sys/dev/bce/if_bce.c(1305): Controller reset failed!
device_attach: bce0 attach returned 6
pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci8: <ACPI PCI bus> on pcib5
igb0: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port =
0xecc0-0xecdf mem =
0xdd7c0000-0xdd7dffff,0xdd800000-0xddbfffff,0xdd7b8000-0xdd7bbfff irq 16 =
at device 0.0 on pci8
igb0: Using MSIX interrupts with 5 vectors
igb0: Ethernet address: 00:1b:21:a9:c7:5c
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
igb1: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port =
0xece0-0xecff mem =
0xdd7e0000-0xdd7fffff,0xddc00000-0xddffffff,0xdd7bc000-0xdd7bffff irq 17 =
at device 0.1 on pci8
igb1: Using MSIX interrupts with 5 vectors
igb1: Ethernet address: 00:1b:21:a9:c7:5d
igb1: Bound queue 0 to cpu 0
igb1: Bound queue 1 to cpu 1
igb1: Bound queue 2 to cpu 2
igb1: Bound queue 3 to cpu 3
ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xde0fc000-0xde0fc3ff =
irq 22 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
pcib6: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib6
mpt0: <LSILogic SAS/SATA Adapter> port 0xfc00-0xfcff mem =
0xde2ec000-0xde2effff,0xde2f0000-0xde2fffff irq 16 at device 0.0 on pci3
mpt0: MPI Version=3D1.5.18.0
mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt0: 1 Active Volume (2 Max)
mpt0: 2 Hidden Drive Members (14 Max)
pcib7: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib7
bce0: <QLogic NetXtreme II BCM5716 1000Base-T (C0)> mem =
0xd8000000-0xd9ffffff irq 16 at device 0.0 on pci2
miibus0: <MII bus> on bce0
brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, =
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce0: Ethernet address: 78:2b:cb:3d:a5:cb
bce0: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); =
Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.11)
Coal (RX:6,6,18,18; TX:20,20,80,80)
bce1: <QLogic NetXtreme II BCM5716 1000Base-T (C0)> mem =
0xda000000-0xdbffffff irq 17 at device 0.1 on pci2
miibus1: <MII bus> on bce1
brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, =
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce1: Ethernet address: 78:2b:cb:3d:a5:cc
bce1: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); =
Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.11)
Coal (RX:6,6,18,18; TX:20,20,80,80)
ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xde0fe000-0xde0fe3ff =
irq 22 at device 29.0 on pci0
---
Cheers=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?A283080D-E467-4259-9B41-AC81381257C3>