From owner-svn-src-stable-8@FreeBSD.ORG Thu Jan 3 21:35:25 2013 Return-Path: Delivered-To: svn-src-stable-8@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by hub.freebsd.org (Postfix) with ESMTP id CA6967B4; Thu, 3 Jan 2013 21:35:25 +0000 (UTC) (envelope-from wblock@FreeBSD.org) Received: from svn.freebsd.org (svn.freebsd.org [IPv6:2001:1900:2254:2068::e6a:0]) by mx1.freebsd.org (Postfix) with ESMTP id A1C31845; Thu, 3 Jan 2013 21:35:25 +0000 (UTC) Received: from svn.freebsd.org (svn.FreeBSD.org [8.8.178.70]) by svn.freebsd.org (8.14.5/8.14.5) with ESMTP id r03LZPt3088797; Thu, 3 Jan 2013 21:35:25 GMT (envelope-from wblock@svn.freebsd.org) Received: (from wblock@localhost) by svn.freebsd.org (8.14.5/8.14.5/Submit) id r03LZPuQ088796; Thu, 3 Jan 2013 21:35:25 GMT (envelope-from wblock@svn.freebsd.org) Message-Id: <201301032135.r03LZPuQ088796@svn.freebsd.org> From: Warren Block Date: Thu, 3 Jan 2013 21:35:25 +0000 (UTC) To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-8@freebsd.org Subject: svn commit: r245009 - stable/8/sbin/ifconfig X-SVN-Group: stable-8 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-BeenThere: svn-src-stable-8@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: SVN commit messages for only the 8-stable src tree List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 03 Jan 2013 21:35:25 -0000 Author: wblock (doc committer) Date: Thu Jan 3 21:35:25 2013 New Revision: 245009 URL: http://svnweb.freebsd.org/changeset/base/245009 Log: MFC r242697,r242704: r242697: Add devd.conf(5) and devd(8) to SEE ALSO xrefs. Give users a pointer to seemingly mysterious actions that are not done by ifconfig itself, but by devd triggering on events caused by ifconfig. r242704: Remove fifteen-year-old notes on media selection (suggested by simon@). Add commas after "e.g." and "i.e.". PR: docs/173405 Modified: stable/8/sbin/ifconfig/ifconfig.8 Directory Properties: stable/8/sbin/ifconfig/ (props changed) Modified: stable/8/sbin/ifconfig/ifconfig.8 ============================================================================== --- stable/8/sbin/ifconfig/ifconfig.8 Thu Jan 3 21:31:57 2013 (r245008) +++ stable/8/sbin/ifconfig/ifconfig.8 Thu Jan 3 21:35:25 2013 (r245009) @@ -28,7 +28,7 @@ .\" From: @(#)ifconfig.8 8.3 (Berkeley) 1/5/94 .\" $FreeBSD$ .\" -.Dd March 7, 2012 +.Dd November 7, 2012 .Dt IFCONFIG 8 .Os .Sh NAME @@ -142,7 +142,7 @@ The link-level address is specified as a series of colon-separated hex digits. This can be used to -e.g.\& set a new MAC address on an ethernet interface, though the +e.g.,\& set a new MAC address on an ethernet interface, though the mechanism used is not ethernet-specific. If the interface is already up when this option is used, it will be briefly brought down and @@ -299,7 +299,7 @@ Specify interface FIB. A FIB .Ar fib_number is assigned to all frames or packets received on that interface. -The FIB is not inherited, e.g. vlans or other sub-interfaces will use +The FIB is not inherited, e.g., vlans or other sub-interfaces will use the default FIB (0) irrespective of the parent interface's FIB. The kernel needs to be tuned to support more than the default FIB using the @@ -934,7 +934,7 @@ For example, if a device is capable of o with 802.11n and 802.11g then one can specify that g-only use should be used by specifying ``6:g''. Similarly the channel width can be specified by appending it -with ``/''; e.g. ``6/40'' specifies a 40MHz wide channel, +with ``/''; e.g., ``6/40'' specifies a 40MHz wide channel, These attributes can be combined as in: ``6:ht/40''. The full set of flags specified following a `:'' are: .Cm a @@ -977,7 +977,7 @@ will operation on the channels, and the can be used on a channel are defined by this setting. Country/Region codes are specified as a 2-character abbreviation defined by ISO 3166 or using a longer, but possibly ambiguous, spelling; -e.g. "ES" and "Spain". +e.g., "ES" and "Spain". The set of country codes are taken from /etc/regdomain.xml and can also be viewed with the ``list countries'' request. Note that not all devices support changing the country code from a default @@ -994,7 +994,7 @@ DFS embodies several facilities includin radar signals, dynamic transmit power control, and channel selection according to a least-congested criteria. DFS support is mandatory for some 5GHz frequencies in certain -locales (e.g. ETSI). +locales (e.g., ETSI). By default DFS is enabled according to the regulatory definitions specified in /etc/regdomain.xml and the curent country code, regdomain, and channel. @@ -1067,7 +1067,7 @@ Enable Dynamic WDS (DWDS) support. DWDS is a facility by which 4-address traffic can be carried between stations operating in infrastructure mode. A station first associates to an access point and authenticates using -normal procedures (e.g. WPA). +normal procedures (e.g., WPA). Then 4-address frames are passed to carry traffic for stations operating on either side of the wireless link. DWDS extends the normal WDS mechanism by leveraging existing security @@ -1085,7 +1085,7 @@ When DWDS is enabled on a station, traff different from the peer station are encapsulated in a 4-address frame and transmitted to the peer. All 4-address traffic uses the security information of the stations -(e.g. cryptographic keys). +(e.g., cryptographic keys). A station is associated using 802.11n facilities may transport 4-address traffic using these same mechanisms; this depends on available resources and capabilities of the device. @@ -1135,7 +1135,7 @@ Stations negotiate use of these faciliti when they associate. To disable all use of 802.11n use .Fl ht . -To disable use of HT20 (e.g. to force only HT40 use) use +To disable use of HT20 (e.g., to force only HT40 use) use .Fl ht20 . To disable use of HT40 use .Fl ht40 . @@ -1149,7 +1149,7 @@ Auto Channel Selection is used to locate HT configuration controls whether legacy, HT20, or HT40 operation is setup on the selected channel. If a fixed channel is specified for a station then HT configuration can -be given as part of the channel specification; e.g. 6:ht/20 to setup +be given as part of the channel specification; e.g., 6:ht/20 to setup HT20 operation on channel 6. .It Cm htcompat Enable use of compatibility support for pre-802.11n devices (default). @@ -1405,13 +1405,13 @@ The default setting is 6 but drivers may they choose. .It Cm mcastrate Ar rate Set the rate for transmitting multicast/broadcast frames. -Rates are specified as megabits/second in decimal; e.g.\& 5.5 for 5.5 Mb/s. +Rates are specified as megabits/second in decimal; e.g.,\& 5.5 for 5.5 Mb/s. This rate should be valid for the current operating conditions; if an invalid rate is specified drivers are free to chose an appropriate rate. .It Cm mgtrate Ar rate Set the rate for transmitting management and/or control frames. -Rates are specified as megabits/second in decimal; e.g.\& 5.5 for 5.5 Mb/s. +Rates are specified as megabits/second in decimal; e.g.,\& 5.5 for 5.5 Mb/s. .It Cm outdoor Set the location to use in calculating regulatory constraints. The location is also advertised in beacon and probe response frames @@ -1571,7 +1571,7 @@ request can be used to show recent scan initiating a new scan. .It Cm scanvalid Ar threshold Set the maximum time the scan cache contents are considered valid; -i.e. will be used without first triggering a scan operation to +i.e., will be used without first triggering a scan operation to refresh the data. The .Ar threshold @@ -1633,7 +1633,7 @@ When operating with TDMA, setup a BSS wi slots. The slot count may be at most 8. The current implementation is only tested with two stations -(i.e. point to point applications). +(i.e., point to point applications). This setting is only meaningful when a station is configured as slot 0; other stations adopt this setting from the BSS they join. By default @@ -1657,7 +1657,7 @@ is set to 10 milliseconds. When operating with TDMA, setup a BSS such that beacons are transmitted every .Ar intval superframes to synchronize the TDMA slot timing. -A superframe is defined as the number of slots times the slot length; e.g. +A superframe is defined as the number of slots times the slot length; e.g., a BSS with two slots of 10 milliseconds has a 20 millisecond superframe. The beacon interval may not be zero. A lower setting of @@ -1683,7 +1683,7 @@ the driver will use the setting closest Not all adapters support changing the transmit power. .It Cm ucastrate Ar rate Set a fixed rate for transmitting unicast frames. -Rates are specified as megabits/second in decimal; e.g.\& 5.5 for 5.5 Mb/s. +Rates are specified as megabits/second in decimal; e.g.,\& 5.5 for 5.5 Mb/s. This rate should be valid for the current operating conditions; if an invalid rate is specified drivers are free to chose an appropriate rate. @@ -2490,9 +2490,6 @@ The flag disables this behavior. .Pp Only the super-user may modify the configuration of a network interface. -.Sh NOTES -The media selection system is relatively new and only some drivers support -it (or have need for it). .Sh EXAMPLES Assign the IPv4 address .Li 192.0.2.10 , @@ -2568,7 +2565,9 @@ tried to alter an interface's configurat .Xr pfsync 4 , .Xr polling 4 , .Xr vlan 4 , +.Xr devd.conf 5 , .\" .Xr eon 5 , +.Xr devd 8 , .Xr rc 8 , .Xr routed 8 , .Xr jail 8 ,