Date: Mon, 16 Jan 2012 05:00:30 GMT From: Zach Metzinger <zmetzing@pobox.com> To: freebsd-bugs@FreeBSD.org Subject: Re: kern/164189 [pccard] Message-ID: <201201160500.q0G50USF083651@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/164189; it has been noted by GNATS.
From: Zach Metzinger <zmetzing@pobox.com>
To: bug-followup@freebsd.org
Cc:
Subject: Re: kern/164189 [pccard]
Date: Sun, 15 Jan 2012 22:42:23 -0600
--aM3YZ0Iwxop3KEKx
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Attached, find additional system information.
--- Zach
--aM3YZ0Iwxop3KEKx
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="devinfo.txt"
nexus0
npx0
ram0
legacy0
cpu0
pcib0
pci0
hostb0 pnpinfo vendor=0x1179 device=0x0601 subvendor=0x0000 subdevice=0x0000 class=0x060000 at slot=0 function=0
cbb0 pnpinfo vendor=0x1179 device=0x060a subvendor=0x0000 subdevice=0x0000 class=0x060700 at slot=2 function=0
cardbus0
pccard0
cbb1 pnpinfo vendor=0x1179 device=0x060a subvendor=0x0000 subdevice=0x0000 class=0x060700 at slot=2 function=1
cardbus1
pccard1
vgapci0 pnpinfo vendor=0x102c device=0x00e4 subvendor=0x0000 subdevice=0x0000 class=0x030000 at slot=4 function=0
drm0
ohci0 pnpinfo vendor=0x1033 device=0x0035 subvendor=0x0000 subdevice=0x0000 class=0x0c0310 at slot=11 function=0
usbus0
uhub0
umass0 pnpinfo vendor=0x0951 product=0x1605 devclass=0x00 devsubclass=0x00 sernum="5B83170009EB" release=0x0110 mode=host intclass=0x08 intsub at bus=1 hubaddr=1 port=0 devaddr=2 interface=0
pir0
eisa0
isa0
unknown pnpinfo pnpid=PNP0c01
atdma0 pnpinfo pnpid=PNP0200
attimer0 pnpinfo pnpid=PNP0100
unknown pnpinfo pnpid=PNP0800
npxisa0 pnpinfo pnpid=PNP0c04
atkbdc0 pnpinfo pnpid=PNP0303
atkbd0
psm0
unknown pnpinfo pnpid=TOS7400
atrtc0 pnpinfo pnpid=PNP0b00
sysresource0 pnpinfo pnpid=PNP0c02
fdc0 pnpinfo pnpid=PNP0700
fd0
fd1
ata0 pnpinfo pnpid=PNP0600
ata1 pnpinfo pnpid=PNP0600
uart0 pnpinfo pnpid=PNP0501
ppc0 pnpinfo pnpid=PNP0401
ppbus0
plip0
lpt0
ppi0
pcibus_pnp0 pnpinfo pnpid=PNP0a03
unknown pnpinfo pnpid=TOS700d
unknown pnpinfo pnpid=TOS7009
unknown pnpinfo pnpid=YMH0021
pmtimer0
sc0
vga0
sbc0
pcm0
midi0
midi1
uart1
--aM3YZ0Iwxop3KEKx
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.short.txt"
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-RELEASE #0: Sun Jan 15 12:57:22 CST 2012
root@wraith:/usr/src/sys/i386/compile/CLUNKER i386
CPU: Pentium/P55C (132.64-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Family = 5 Model = 4 Stepping = 3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 84017152 (80 MB)
avail memory = 63082496 (60 MB)
Intel Pentium detected, installing workaround for F00F bug
kbd1 at kbdmux0
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 3 Entries> on motherboard
pci0: <PCI bus> on pcib0
cbb0: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 2.0 on pci0
cbb0: Found memory at 80000000
cbb0: Secondary bus is 20
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 2.1 on pci0
cbb1: Found memory at 80001000
cbb1: Secondary bus is 21
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
vgapci0: <VGA-compatible display> mem 0xfe000000-0xfeffffff at device 4.0 on pci0
ohci0: <NEC uPD 9210 USB controller> mem 0xfdfff000-0xfdffffff irq 11 at device 11.0 on pci0
usbus0: <NEC uPD 9210 USB controller> on ohci0
cpu0 on motherboard
isa0: <ISA bus> on motherboard
pmtimer0 on isa0
unknown: <PNP0c01> can't assign resources (memory)
attimer0: <AT timer> at port 0x40-0x43 irq 0 pnpid PNP0100 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 irq 1 pnpid PNP0303 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atrtc0: <AT realtime clock> at port 0x70-0x71 irq 8 pnpid PNP0b00 on isa0
Event timer "RTC" frequency 32768 Hz quality 0
fdc0: <NEC 765 or clone> at port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 pnpid PNP0700 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0: <Generic ESDI/IDE/ATA controller> at port 0x1f0-0x1f7,0x3f6 irq 14 pnpid PNP0600 on isa0
ata1: <Generic ESDI/IDE/ATA controller> at port 0x170-0x177,0x376-0x377 irq 15 pnpid PNP0600 on isa0
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 pnpid PNP0501 on isa0
ppc0: <ECP parallel printer port> at port 0x378-0x37f,0x778-0x77a irq 7 drq 3 pnpid PNP0401 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sbc0: <SoundBlaster Pro> at port 0x220-0x22f irq 5 drq 0 on isa0
sbc0: [GIANT-LOCKED]
pcm0: <SB DSP 3.01> on sbc0
pcm0: [GIANT-LOCKED]
uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8-0x2ff irq 3 on isa0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <TOS700d> can't assign resources (port)
unknown: <YMH0021> can't assign resources (port)
Timecounters tick every 1.000 msec
Status is 0x30000006
Status is 0x30000006
usbus0: 12Mbps Full Speed USB v1.0
ugen0.1: <NEC> at usbus0
uhub0: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <ST91430AG 21.21.03> ATA-3 device
ada0: 16.700MB/s transfers (PIO4, PIO 8192bytes)
ada0: 1382MB (2830464 512 byte sectors: 16H 63S/T 2808C)
ada0: Previously was known as ad0
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <TOSHIBA CD-ROM XM-1502BN 1001> Removable CD-ROM SCSI-0 device
cd0: 11.100MB/s transfers (PIO3, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Timecounter "TSC" frequency 132635048 Hz quality 800
uhub0: 2 ports with 2 removable, self powered
ugen0.2: <Kingston> at usbus0
umass0: <Kingston DataTravelerMini, class 0/0, rev 2.00/1.10, addr 2> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0x4100
umass0:2:0:-1: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Kingston DataTravelerMini PMAP> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 1912MB (3915776 512 byte sectors: 255H 63S/T 243C)
Trying to mount root from ufs:/dev/ada0s1a [rw]...
Status is 0x30000410
cbb1: card inserted: event=0x00000000, state=30000410
pccard1: chip_socket_enable
cbb_pcic_socket_enable:
cbb1: cbb_power: 5V
pccard1: read_cis
CIS is too long -- truncating
pccard1: check_cis_quirks
pccard1: Card has no functions!
cbb1: PC Card card activation failed
Status is 0x30000416
cbb_pcic_socket_disable
cbb1: cbb_power: 0V
Status is 0x30000410
cbb1: card inserted: event=0x00000000, state=30000410
pccard1: chip_socket_enable
cbb_pcic_socket_enable:
cbb1: cbb_power: 5V
pccard1: read_cis
CIS is too long -- truncating
pccard1: check_cis_quirks
pccard1: Card has no functions!
cbb1: PC Card card activation failed
Status is 0x30000416
cbb_pcic_socket_disable
cbb1: cbb_power: 0V
Status is 0x30000410
cbb1: card inserted: event=0x00000000, state=30000410
pccard1: chip_socket_enable
cbb_pcic_socket_enable:
cbb1: cbb_power: 5V
pccard1: read_cis
CIS is too long -- truncating
pccard1: check_cis_quirks
pccard1: Card has no functions!
cbb1: PC Card card activation failed
Status is 0x30000416
cbb_pcic_socket_disable
cbb1: cbb_power: 0V
Status is 0x30000410
cbb1: card inserted: event=0x00000000, state=30000410
pccard1: chip_socket_enable
cbb_pcic_socket_enable:
cbb1: cbb_power: 5V
pccard1: read_cis
CIS is too long -- truncating
pccard1: check_cis_quirks
pccard1: Card has no functions!
cbb1: PC Card card activation failed
Status is 0x30000416
cbb_pcic_socket_disable
cbb1: cbb_power: 0V
--aM3YZ0Iwxop3KEKx
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="pciconf.txt"
hostb0@pci0:0:0:0: class=0x060000 card=0x00000000 chip=0x06011179 rev=0x27 hdr=0x00
vendor = 'Toshiba America Info Systems'
device = 'CPU to PCI bridge'
class = bridge
subclass = HOST-PCI
cbb0@pci0:0:2:0: class=0x060700 card=0x00000000 chip=0x060a1179 rev=0x07 hdr=0x02
vendor = 'Toshiba America Info Systems'
device = 'ToPIC95'
class = bridge
subclass = PCI-CardBus
cbb1@pci0:0:2:1: class=0x060700 card=0x00000000 chip=0x060a1179 rev=0x07 hdr=0x02
vendor = 'Toshiba America Info Systems'
device = 'ToPIC95'
class = bridge
subclass = PCI-CardBus
vgapci0@pci0:0:4:0: class=0x030000 card=0x00000000 chip=0x00e4102c rev=0xc2 hdr=0x00
vendor = 'Chips and Technologies'
device = 'F65554'
class = display
subclass = VGA
ohci0@pci0:0:11:0: class=0x0c0310 card=0x00000000 chip=0x00351033 rev=0x01 hdr=0x00
vendor = 'NEC Corporation'
device = 'USB'
class = serial bus
subclass = USB
--aM3YZ0Iwxop3KEKx--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201201160500.q0G50USF083651>