Date: Fri, 11 Jul 2014 13:15:34 -0400 From: Anthony Jenkins <Anthony.B.Jenkins@att.net> To: Daniele Mazzotti <kappei84@gmail.com>, takawata@init-main.com Cc: freebsd-acpi@freebsd.org Subject: Re: ACPI support - Freebsd 10 on Sony Vaio VPCCA3C5E Message-ID: <53C01BB6.8080109@att.net> In-Reply-To: <CAC=ypSULmXU2HBpG2gf2J=9_o-sLccECud%2Be9KUg6-ppz7phww@mail.gmail.com> References: <CAC=ypSVopgcL82FpqJosmgFeRkeeevP0RG-GrAEZD2YQyi%2BPrg@mail.gmail.com> <53BF0546.70505@att.net> <CAC=ypSUe0_09pTMFsMKw4u3J=Kb8Q_uV0g6%2Bk_f2p1so3mnTgA@mail.gmail.com> <53BFCBF4.2090104@att.net> <CAC=ypSULmXU2HBpG2gf2J=9_o-sLccECud%2Be9KUg6-ppz7phww@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Takawata might be able to help you better than me; I'm trying to learn this ACPI stuff myself (trying to add support for ACPI CMOS regions and fix my own laptop's flakiness). If you're just running a generic kernel, I'm pretty sure all you have to do is: 1. Ensure you have the system sources installed at /usr/src. 2. Copy /usr/src/sys/$(uname -m)/conf/GENERIC to /usr/src/sys/$(uname -m)/conf/MYKERNEL. * 3. Edit /usr/src/sys/$(uname -m)/conf/MYKERNEL to add the 'options ACPI_DEBUG' line. 4. 'cd' to /usr/src. 5. Run 'make kernel KERNCONF=MYKERNEL'. 6. Reboot. * 'uname -m' prints your system architecture (e.g. 'amd64' or 'i386'); you could simply substitute the architecture string in the paths above. Anthony On 07/11/2014 12:10, Daniele Mazzotti wrote: > Hi guys, > > thanks again for the support. > > @Anthony: I will try to include the options in a custom kernel and compile > it. As this is the first time after years I am compiling a custom kernel it > will take a few time I guess. > > Just let me know if the output of the acpidump is of any help to you. > Cheers, > Daniele. > > > 2014-07-11 13:35 GMT+02:00 Anthony Jenkins <Anthony.B.Jenkins@att.net>: > >> Hi Daniele, >> >> I was just going from acpi(4) man page; you'll likely have to build a new >> kernel with 'options ACPI_DEBUG' added to your kernel config file, as I >> don't know if it's even possible to turn on the logging I want at runtime. >> >> [ajenkins@ajenkins-hplaptop /usr/home/ajenkins]$ grep -i acpi >> /usr/src/sys/amd64/conf/MYKERNEL >> device acpi >> options ACPI_DEBUG >> >> I also have an 'options ACPI_DMAR' , but I don't recognize that and you >> don't need that to debug your battery. >> >> Anthony >> >> On 07/11/2014 01:58, Daniele Mazzotti wrote: >>> Hello Anthony, >>> >>> thanks for the quick reply! I tried what you suggested. >>> >>> loader.conf: >>> >>> # Module for Windows Partition & Linux Mount >>> fuse_load="YES" >>> autoboot_delay="5" >>> #acpi_sony_load="YES" >>> >>> # Debugging Symbols for ACPI >>> debug.acpi.layer="ACPI_BATTERY" >>> debug.acpi.level="ACPI_LV_ALL_EXCEPTIONS" >>> debug.acpi.enable_debug_objects="1" >>> >>> sysctl hw.acpi.battery: >>> >>> hw.acpi.battery.life: -1 >>> hw.acpi.battery.time: -1 >>> hw.acpi.battery.state: 7 >>> hw.acpi.battery.units: 1 >>> hw.acpi.battery.info_expire: 5 >>> >>> log/messages: >>> >>> cat /var/log/messages | grep acpi >>> >>> Jul 11 07:30:47 Von-Neumann kernel: acpi0: <Sony> on motherboard >>> Jul 11 07:30:47 Von-Neumann kernel: acpi_ec0: <Embedded Controller: GPE >>> 0x17, ECDT> port 0x62,0x66 on acpi0 >>> Jul 11 07:30:47 Von-Neumann kernel: cpu0: <ACPI CPU> on acpi0 >>> Jul 11 07:30:47 Von-Neumann kernel: cpu1: <ACPI CPU> on acpi0 >>> Jul 11 07:30:47 Von-Neumann kernel: cpu2: <ACPI CPU> on acpi0 >>> Jul 11 07:30:47 Von-Neumann kernel: cpu3: <ACPI CPU> on acpi0 >>> Jul 11 07:30:47 Von-Neumann kernel: hpet0: <High Precision Event Timer> >>> iomem 0xfed00000-0xfed003ff on acpi0 >>> Jul 11 07:30:47 Von-Neumann kernel: atrtc0: <AT realtime clock> port >>> 0x70-0x77 irq 8 on acpi0 >>> Jul 11 07:30:47 Von-Neumann kernel: attimer0: <AT timer> port >>> 0x40-0x43,0x50-0x53 irq 0 on acpi0 >>> Jul 11 07:30:47 Von-Neumann kernel: acpi_timer0: <24-bit timer at >>> 3.579545MHz> port 0x408-0x40b on acpi0 >>> Jul 11 07:30:47 Von-Neumann kernel: pcib0: <ACPI Host-PCI bridge> port >>> 0xcf8-0xcff on acpi0 >>> Jul 11 07:30:47 Von-Neumann kernel: battery0: <ACPI Control Method >> Battery> >>> on acpi0 >>> Jul 11 07:30:47 Von-Neumann kernel: acpi_acad0: <AC Adapter> on acpi0 >>> Jul 11 07:30:47 Von-Neumann kernel: acpi_lid0: <Control Method Lid >> Switch> >>> on acpi0 >>> Jul 11 07:30:47 Von-Neumann kernel: acpi_button0: <Power Button> on acpi0 >>> Jul 11 07:30:47 Von-Neumann kernel: acpi_tz0: <Thermal Zone> on acpi0 >>> Jul 11 07:30:47 Von-Neumann kernel: acpi_tz1: <Thermal Zone> on acpi0 >>> Jul 11 07:30:47 Von-Neumann kernel: atkbdc0: <Keyboard controller >> (i8042)> >>> port 0x60,0x64 irq 1 on acpi0 >>> Jul 11 07:30:47 Von-Neumann kernel: acpi_sony0: <Sony notebook >> controller> >>> on acpi0 >>> Jul 11 07:30:47 Von-Neumann kernel: acpi_sony0: PID 0 >>> Jul 11 07:37:54 Von-Neumann kernel: acpi0: <Sony> on motherboard >>> Jul 11 07:37:54 Von-Neumann kernel: acpi_ec0: <Embedded Controller: GPE >>> 0x17, ECDT> port 0x62,0x66 on acpi0 >>> Jul 11 07:37:54 Von-Neumann kernel: cpu0: <ACPI CPU> on acpi0 >>> Jul 11 07:37:54 Von-Neumann kernel: cpu1: <ACPI CPU> on acpi0 >>> Jul 11 07:37:54 Von-Neumann kernel: cpu2: <ACPI CPU> on acpi0 >>> Jul 11 07:37:54 Von-Neumann kernel: cpu3: <ACPI CPU> on acpi0 >>> Jul 11 07:37:54 Von-Neumann kernel: hpet0: <High Precision Event Timer> >>> iomem 0xfed00000-0xfed003ff on acpi0 >>> Jul 11 07:37:54 Von-Neumann kernel: atrtc0: <AT realtime clock> port >>> 0x70-0x77 irq 8 on acpi0 >>> Jul 11 07:37:54 Von-Neumann kernel: attimer0: <AT timer> port >>> 0x40-0x43,0x50-0x53 irq 0 on acpi0 >>> Jul 11 07:37:54 Von-Neumann kernel: acpi_timer0: <24-bit timer at >>> 3.579545MHz> port 0x408-0x40b on acpi0 >>> Jul 11 07:37:54 Von-Neumann kernel: pcib0: <ACPI Host-PCI bridge> port >>> 0xcf8-0xcff on acpi0 >>> Jul 11 07:37:54 Von-Neumann kernel: battery0: <ACPI Control Method >> Battery> >>> on acpi0 >>> Jul 11 07:37:54 Von-Neumann kernel: acpi_acad0: <AC Adapter> on acpi0 >>> Jul 11 07:37:54 Von-Neumann kernel: acpi_lid0: <Control Method Lid >> Switch> >>> on acpi0 >>> Jul 11 07:37:54 Von-Neumann kernel: acpi_button0: <Power Button> on acpi0 >>> Jul 11 07:37:54 Von-Neumann kernel: acpi_tz0: <Thermal Zone> on acpi0 >>> Jul 11 07:37:54 Von-Neumann kernel: acpi_tz1: <Thermal Zone> on acpi0 >>> Jul 11 07:37:54 Von-Neumann kernel: atkbdc0: <Keyboard controller >> (i8042)> >>> port 0x60,0x64 irq 1 on acpi0 >>> >>> It seems to me the verbose debugging is either not enabled (perhaps I >> made >>> some mistakes with the loader.conf) or the debug is really enabled but >>> there is no special output on the wrong log file. Actually I am a bit >>> puzzled as I am not a real expert "admin". I only enjoy getting my hands >> on >>> Unix on my desktop PC just for fun. >>> >>> However, do you think either I missed something or made anything wrong? >>> I look forward to receiving from you. >>> >>> Cheers, >>> Daniele. >>> >>> >>> >>> 2014-07-10 23:27 GMT+02:00 Anthony Jenkins <Anthony.B.Jenkins@att.net>: >>> >>>> On 07/10/2014 16:49, Daniele Mazzotti wrote: >>>>> Hello there, >>>>> >>>>> it is been a while since I finished installing Freebsd 10 on my Sony >> Vaio >>>>> PC and resolving (or at least I am trying to) one by one, all the >>>> problems >>>>> this hardware is giving me. Actually I cannot find a solution to >>>> correctly >>>>> display the battery level on my laptop. If I unplug my PC from the >> power >>>>> and type 'sysctl hw.acpi.battery' this is the result I get: >>>>> >>>>> hw.acpi.battery.life: -1 >>>>> hw.acpi.battery.time: -1 >>>>> hw.acpi.battery.state: 7 >>>>> hw.acpi.battery.units: 1 >>>>> hw.acpi.battery.info_expire: 5 >>>>> >>>>> Moreover the suspend mode is giving me some problems as well, but this >>>> has >>>>> definitely a lower priority. >>>>> >>>>> I either tried to search for a solution on the FreeBSD Handook with no >>>>> luck, and google the problem a little bit, but I could not find any >>>>> valuable help. I would be really interested to investigate the problem >>>>> further. Is there anyone who can help me out with this and tell me what >>>>> pieces of information are needed to better understand the problem? >>>> Try enabling the ACPI_BATTERY layer and ACPI_LV_ALL_EXCEPTIONS level in >>>> /boot/loader.conf: >>>> >>>> debug.acpi.layer="ACPI_BATTERY" >>>> debug.acpi.level="ACPI_LV_ALL_EXCEPTIONS" >>>> debug.acpi.enable_debug_objects="1" # I assume this is how >> you >>>> turn on ACPI debugging without recompiling the kernel with 'options >>>> ACPI_DEBUG' >>>> >>>> and running 'sysctl hw.acpi.battery' again. Post /var/log/messages ACPI >>>> messages about battery here. >>>> >>>> Anthony >>>> >>>>> Cheers, >>>>> Daniele. >>>>> _______________________________________________ >>>>> freebsd-acpi@freebsd.org mailing list >>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-acpi >>>>> To unsubscribe, send any mail to "freebsd-acpi-unsubscribe@freebsd.org >> " >>> _______________________________________________ >>> freebsd-acpi@freebsd.org mailing list >>> http://lists.freebsd.org/mailman/listinfo/freebsd-acpi >>> To unsubscribe, send any mail to "freebsd-acpi-unsubscribe@freebsd.org" >>> >> > _______________________________________________ > freebsd-acpi@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-acpi > To unsubscribe, send any mail to "freebsd-acpi-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?53C01BB6.8080109>