Date: Thu, 18 Mar 2010 18:52:19 +0000 (UTC) From: Pyun YongHyeon <yongari@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-7@freebsd.org Subject: svn commit: r205289 - stable/7/sys/dev/bge Message-ID: <201003181852.o2IIqJCT007535@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: yongari Date: Thu Mar 18 18:52:18 2010 New Revision: 205289 URL: http://svn.freebsd.org/changeset/base/205289 Log: MFC r203358,203716: r203358: PCI express device status register has W1C feature. Writing 0 has no effect. Make sure to clear error bits by writing 1. [1] While I'm here use predefined value instead of hardcodig magic vlaue. Submitted by: msaitoh at NetBSD [1] r203716: Move device specific flag configuration to attach routine. The softc obtained in device probe wouldn't be the same one used in device attach. Drivers should not assume any values stored in softc structure in probe routine will be available for its attach routine. Modified: stable/7/sys/dev/bge/if_bge.c Directory Properties: stable/7/sys/ (props changed) stable/7/sys/cddl/contrib/opensolaris/ (props changed) stable/7/sys/contrib/dev/acpica/ (props changed) stable/7/sys/contrib/pf/ (props changed) Modified: stable/7/sys/dev/bge/if_bge.c ============================================================================== --- stable/7/sys/dev/bge/if_bge.c Thu Mar 18 18:50:20 2010 (r205288) +++ stable/7/sys/dev/bge/if_bge.c Thu Mar 18 18:52:18 2010 (r205289) @@ -1993,10 +1993,6 @@ bge_probe(device_t dev) snprintf(buf, 96, "%s, %sASIC rev. %#08x", model, br != NULL ? "" : "unknown ", id); device_set_desc_copy(dev, buf); - if (pci_get_subvendor(dev) == DELL_VENDORID) - sc->bge_flags |= BGE_FLAG_NO_3LED; - if (did == BCOM_DEVICEID_BCM5755M) - sc->bge_flags |= BGE_FLAG_ADJUST_TRIM; return (0); } t++; @@ -2607,6 +2603,10 @@ bge_attach(device_t dev) sc->bge_flags |= BGE_FLAG_ADC_BUG; if (sc->bge_chipid == BGE_CHIPID_BCM5704_A0) sc->bge_flags |= BGE_FLAG_5704_A0_BUG; + if (pci_get_subvendor(dev) == DELL_VENDORID) + sc->bge_flags |= BGE_FLAG_NO_3LED; + if (pci_get_device(dev) == BCOM_DEVICEID_BCM5755M) + sc->bge_flags |= BGE_FLAG_ADJUST_TRIM; if (BGE_IS_5705_PLUS(sc) && !(sc->bge_flags & BGE_FLAG_ADJUST_TRIM)) { if (sc->bge_asicrev == BGE_ASICREV_BCM5755 || @@ -3136,14 +3136,17 @@ bge_reset(struct bge_softc *sc) devctl = pci_read_config(dev, sc->bge_expcap + PCIR_EXPRESS_DEVICE_CTL, 2); /* Clear enable no snoop and disable relaxed ordering. */ - devctl &= ~(0x0010 | 0x0800); + devctl &= ~(PCIM_EXP_CTL_RELAXED_ORD_ENABLE | + PCIM_EXP_CTL_NOSNOOP_ENABLE); /* Set PCIE max payload size to 128. */ devctl &= ~PCIM_EXP_CTL_MAX_PAYLOAD; pci_write_config(dev, sc->bge_expcap + PCIR_EXPRESS_DEVICE_CTL, devctl, 2); /* Clear error status. */ pci_write_config(dev, sc->bge_expcap + PCIR_EXPRESS_DEVICE_STA, - 0, 2); + PCIM_EXP_STA_CORRECTABLE_ERROR | + PCIM_EXP_STA_NON_FATAL_ERROR | PCIM_EXP_STA_FATAL_ERROR | + PCIM_EXP_STA_UNSUPPORTED_REQ, 2); } /* Reset some of the PCI state that got zapped by reset. */
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201003181852.o2IIqJCT007535>