Date: Fri, 10 Mar 2000 09:04:55 +0100 (CET) From: Soren Schmidt <sos@freebsd.dk> To: hansot@iae.nl (Hans Ottevanger) Cc: current@FreeBSD.ORG Subject: Re: RC3 install floppies: panic: resource_list_alloc: resource entry is busy Message-ID: <200003100804.JAA99578@freebsd.dk> In-Reply-To: <38C81F71.6CBD66B3@iae.nl> from Hans Ottevanger at "Mar 9, 2000 11:02:25 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
It seems Hans Ottevanger wrote: > Hi folks, > > I just tried to boot the RC3 install floppies on my Pentium 66 testbox. > It gets through the config stage without trouble, but then panics > immediately with: > > ... > pcib0: <Host to PCI bridge> on motherboard > pci0: <PCI bus> on pcib0 > atapci0: <RZ 100? ATA controller !WARNING! buggy chip data loss > possible> port 0 > x3f4-0x3f7,0x1f0-0x1f7 at device 1.0 on pci0 > atapci0: Busmastering DMA not supported > panic: resource_list_alloc: resource entry is busy > > I am also having this problem with 4.0-CURRENT kernels since February > 18, both with my own custom kernel config and GENERIC. > I have to revert to the ata driver of February 17 or earlier to get the > system booting again, and then it runs perfectly. Hmm, seems to be a resource conflict problem, question is what is causing this. Could you do a verbose boot both with the old working kernel, and the new failing one ? > This machine has an Intel motherboard with a Mercury chipset, 64 Mbyte > RAM, Matrox Millenium II, two Western Digital disks, and it ran all > previous FreeBSD releases perfectly for almost five years. Yeah I notice the RZ 1000 chips in there, BE CAREFULL, I wouldn't use this for anything I cared about... -Søren To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200003100804.JAA99578>