Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 06 Jul 2005 17:21:57 -0400
From:      Mike Tancsa <mike@sentex.net>
To:        John Baldwin <jhb@FreeBSD.org>
Cc:        freebsd-current@FreeBSD.org
Subject:   Re: 6.0-CURRENT SNAP004 hangs on amr (long)
Message-ID:  <6.2.1.2.0.20050706172136.083fd0b0@64.7.153.2>
In-Reply-To: <200507061520.04803.jhb@FreeBSD.org>
References:  <70e8236f05070208212e36c375@mail.gmail.com> <6.2.1.2.0.20050706115824.07a58588@64.7.153.2> <6.2.1.2.0.20050706134748.07ca1ab8@64.7.153.2> <200507061520.04803.jhb@FreeBSD.org>

next in thread | previous in thread | raw e-mail | index | archive | help
At 03:20 PM 06/07/2005, John Baldwin wrote:
>On Wednesday 06 July 2005 01:54 pm, Mike Tancsa wrote:
> > At 12:23 PM 06/07/2005, Mike Tancsa wrote:
> > >At 11:53 AM 06/07/2005, Mike Tancsa wrote:
> > >>At 11:43 AM 06/07/2005, Scott Long wrote:
> > >>>According to the original dmesg, the hang happens well after bus
> > >>>enumeration is complete and interrupts have been enabled.  It's
> > >>>happening on a taste I/O from GEOM.
> > >>
> > >>Here is a boot -v that is a little more upto date.  I am just netbooting
> > >>with various kernel configs to try and sort out whats going on.
> >
> > And here is the box booting up with RELENG_5 off the disk.  I did at one
> > point install HEAD on the disk, but it was the same behaviour as I see with
> > a netboot.
>
>Hmm, this dmesg has ACPI disabled whereas the 6.0 one had ACPI enabled.  Are
>all the IRQs the same in the 5.x and 6.0 cases?

Actually, on RELENG_5, ACPI does not work in that my NIC errors out at boot 
up time


/boot/kernel/acpi.ko text=0x414dc data=0x1dc4+0x112c 
syms=[0x4+0x7670+0x4+0x9d05]
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD 5.4-STABLE #0: Thu Jun 30 19:15:07 EDT 2005
     mdtancsa@hippo.sentex.ca:/usr/obj/usr/src/sys/hippo
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium III/Pentium III Xeon/Celeron (500.02-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x672  Stepping = 2
   Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 2147475456 (2047 MB)
avail memory = 2096021504 (1998 MB)
ACPI APIC Table: <DELL   PE6350  >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
  cpu0 (BSP): APIC ID:  3
  cpu1 (AP): APIC ID:  0
  cpu2 (AP): APIC ID:  1
  cpu3 (AP): APIC ID:  2
ioapic0: Changing APIC ID to 4
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL PE6350> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 
0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 2.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, USB> at device 2.2 (no driver attached)
pci0: <bridge> at device 2.3 (no driver attached)
pci0: <display, VGA> at device 4.0 (no driver attached)
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI Host-PCI bridge> on acpi0
pci2: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 
0xecc0-0xecff mem 0xfeb00000-0xfeb1ffff,0xfeb20000-0xfeb3ffff ir2
em0: Hardware Initialization Failedem0: Unable to initialize the hardware
device_attach: em0 attach returned 5
pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci3
pci4: <PCI bus> on pcib4
amr0: <LSILogic MegaRAID 1.51> mem 0xf0000000-0xf7ffffff irq 16 at device 
0.0 on pci4
amr0: <LSILogic PERC 3/DC> Firmware 161J, BIOS 3.17, 128MB RAM
pci3: <mass storage, SCSI> at device 1.0 (no driver attached)
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm: keyboard controller failed.
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
orm0: <ISA Option ROMs> at iomem 0xc8000-0xc8fff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 34556MB (70770688 sectors) RAID 5 (optimal)
ses0 at amr0 bus 0 target 6 lun 0
ses0: <DELL 1x3 U2W SCSI BP 5.12> Fixed Processor SCSI-2 device
ses0: SAF-TE Compliant Device
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Mounting root from ufs:/dev/amrd0s1a
Pre-seeding PRNG: kickstart.
Loading configuration files.
Entropy harvesting: interrupts ethernet point_to_point kickstart.
swapon: adding /dev/amrd0s1b as swap device
Starting file system checks:
/dev/amrd0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/amrd0s1a: clean, 220341 free (661 frags, 27460 blocks, 0.3% fragmentation)
/dev/amrd0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/amrd0s1e: clean, 506481 free (41 frags, 63305 blocks, 0.0% fragmentation)
/dev/amrd0s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/amrd0s1f: clean, 11257854 free (34774 frags, 1402885 blocks, 0.3% 
fragmentation)
/dev/amrd0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/amrd0s1d: clean, 2528867 free (387 frags, 316060 blocks, 0.0% 
fragmentation)
Setting hostname: hippo.sentex.ca.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet 127.0.0.1 netmask 0xff000000
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
Additional routing options: IP gateway=YES.
Starting devd.
Mounting NFS file systems:.
Starting syslogd.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
Recovering vi editor sessions:.
Starting local daemons:.
Updating motd.
Configuring syscons: blanktime.
Starting sshd.
Initial i386 initialization:.
Additional ABI support:.
Starting cron.
Local package initialization:.
Additional TCP options:. 




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.2.1.2.0.20050706172136.083fd0b0>