From owner-freebsd-doc Fri Jun 16 14:32:27 1995 Return-Path: doc-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id OAA20435 for doc-outgoing; Fri, 16 Jun 1995 14:32:27 -0700 Received: from netcom16.netcom.com (root@netcom16.netcom.com [192.100.81.129]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id OAA20429 for ; Fri, 16 Jun 1995 14:32:24 -0700 Received: from Ðãs’³6 *tá$6¢*tP by netcom16.netcom.com (8.6.12/Netcom) id OAA11118; Fri, 16 Jun 1995 14:31:39 -0700 Date: Fri, 16 Jun 1995 14:31:39 -0700 Message-Id: <199506162131.OAA11118@netcom16.netcom.com> X-Mailer: NCSA Mosaic/2.0.0b4 (Windows x86) X-URL: http://www.freebsd.org:80/How/ From: rjiang@akbs.com (Ruiyuan Jiang) To: doc@freebsd.org Subject: Newbie Tries to install FreeBSD 2.0.5 From Diskettes Sender: doc-owner@freebsd.org Precedence: bulk Yesterday I sent a message to doc@freebsd.org. This morning I received two response messages from Mr. Mike Smith and Mr. Jordan K. Hubbard" . They are very helpful. Thanks a lot. Right now the installation can pass diskette 4 no problem but the installation (same Kern-Developer installation) stopped at diskette dict\dict.aa, info\info.aa and src\ssys.aa. All these three diskettes had the same messages "Warning: You have selected a Read-only root device and may be unable to find the appropriate device entries on it if it is from an older pre-slice version of FreeBSD". Does anybody out there know why? Thanks in advance. Ruiyuan Jiang > Make sure that the root filesystem is marked for "newfs", and that the > warning you describe below does not come up. You must have been > fooling around in the label editor and somehow set the options wrong. >> I am trying to install FreeBSD Release 2.0.5 to a machine "Compaq >> luggable" 486 DX-33 with 202MB hard disk, 20 MB RAM(no MS-DOS >> nothing). I use Kern-Developer and 3.5" diskettes (each diskettes has >> 6 files on it) options to do installation. After I specified all the >> options and started to load FreeBSD, the first message I got was >> "Warning: You have selected a Read-only root device and may be unable >> to find the appropriate device entries on it if it is from an older >> pre-slice version of FreeBSD". What I could do at this point was to >> hit enter to go to the next step. The system started to load from >> diskette "boot.flp" and rest of them. It seemed OK but when the >> system asked me to put in file bin\bin.as (started with file >> bin\bin.as to bin\bin.ax) which in my case is diskette 4. I put in >> and hit enter. After reading about 3 second, the system prompted me a >> message "Write failure on transfer! (wrote -1 bytes of 10240 bytes)". >> I could skip this diskette (I can choose to load it later) and could >> load next disketts. I tried to reformat the diskette and downloaded >> all the files again and tried to use brand new diskette, formated it >> first and downloaded the files and reinstalled FreeBSD but I stucked >> at the same place and got the same message. Does anyone out there >> know why? Thanks in advance. >> >> Ruiyuan Jiang >> System Administrator >> ADVANTAGE kbs, Inc. >> rjiang@akbs.com >> (908) 287-2236 >> FAX (908) 287-3193