Date: Fri, 4 Jan 2013 02:28:35 +0100 From: Monthadar Al Jaberi <monthadar@gmail.com> To: Adrian Chadd <adrian@freebsd.org> Cc: freebsd-wireless@freebsd.org, freebsd-mips@freebsd.org Subject: Re: ath0: could not map interrupt Message-ID: <CA%2BsBSoJY7AHjN=cMv6sfXHF4R0_z60c4q9BXEo20jCq6BJGEPg@mail.gmail.com> In-Reply-To: <CA%2BsBSoJg%2B%2BNo1ApSfUVnh1dDVgqEUPLpFJZPv3Ac%2BvaMno01sQ@mail.gmail.com> References: <CA%2BsBSoKs9s0SxAOyf91pcPv0MZMx3LCHh%2B_dTN-2mEQdYdH45g@mail.gmail.com> <CA%2BsBSo%2BpxqvWkrMjd8pmJSYUBdr0HuMW4eARJFcaFrG5tEYqBg@mail.gmail.com> <CAJ-Vmon%2BGzpXYkfE%2Bu7CDoXqmpH=zeJPcQdrukxAa9QH-2GazQ@mail.gmail.com> <CA%2BsBSoJg%2B%2BNo1ApSfUVnh1dDVgqEUPLpFJZPv3Ac%2BvaMno01sQ@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, I am wondering if anyone can confirm that any ath5k (preferably AR5413) series miniPCI wifi works on RB433/AH/UAH. Thank you in advance On Wed, Jan 2, 2013 at 10:29 PM, Monthadar Al Jaberi <monthadar@gmail.com> wrote: > On Wed, Jan 2, 2013 at 9:43 PM, Adrian Chadd <adrian@freebsd.org> wrote: >> ... sounds like a definite interrupt routing issue. >> >> Who's been knee deep in the interrupt handling code in MIPS lately? Grrr. >> I know there's been some FDT work in MIPS and that's touched some >> interrupt code.. maybe that's interfering? > > I am not sure, I just re-compiled my kernel for RSPRO and it seems to work. > > I install openwrt on rb433ah and ath0 associated ok. and I could ping > between RSPRO(FreeBSD) and RB433AH(Openwrt). RSPRO and non working > RB433AH running same kernel r243866. > > Attached is my kernel config & hints. ( I am "playing around" with the > ar71xx_spi but that should not effect the pci code, I hope). > > # > # AR71XX -- Kernel configuration file for FreeBSD/MIPS for Atheros 71xx systems > # > # This includes all the common drivers for the AR71XX boards along with > # the usb, net80211 and atheros driver code. > # > # $FreeBSD$ > # > > machine mips mips > ident RB433AH_MFS > cpu CPU_MIPS4KC > makeoptions KERNLOADADDR=0x80050000 > options HZ=1000 > options HWPMC_HOOKS > > files "../atheros/files.ar71xx" > > # For now, hints are per-board. > > hints "RB433AH.hints" > > makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols > > # Build these as modules so small platform builds will have the > # modules already built. > makeoptions MODULES_OVERRIDE="random gpio ar71xx if_gif if_gre > if_bridge bridgestp usb wlan wlan_xauth wlan_acl wlan_wep wlan_tkip > wlan_ccmp wlan_rssadapt wlan_amrr ath ath_pci" > > options DDB > options KDB > > options SCHED_4BSD #4BSD scheduler > options INET #InterNETworking > #options INET6 # IPv6 > > # options NFS_CL #Network Filesystem Client > > options PSEUDOFS #Pseudo-filesystem framework > options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions > > # options NFS_LEGACYRPC > # Debugging for use in -current > options INVARIANTS > options INVARIANT_SUPPORT > options WITNESS > options WITNESS_SKIPSPIN > options DEBUG_REDZONE > options DEBUG_MEMGUARD > > options FFS #Berkeley Fast Filesystem > # options SOFTUPDATES #Enable FFS soft updates support > # options UFS_ACL #Support for access control lists > # options UFS_DIRHASH #Improve performance on big > directories > # options MSDOSFS # Read MSDOS filesystems; useful for USB/CF > > device pci > device ar71xx_pci > > # RTC - requires hackery in the spibus code to work > device pcf2123_rtc > > # GEOM modules > device geom_redboot # to get access to the SPI flash partitions > device geom_uzip # compressed in-memory filesystem hackery! > device geom_map > options GEOM_UZIP > > # NANDFS > options NANDFS > > ## Boot from the first MFS uzip > #options ROOTDEVNAME=\"ufs:md0.uzip\" > #options MD_ROOT > #options MD_ROOT_SIZE="9000" > > # Boot from NFS > options NFSLOCKD #Network Lock Manager > options NFSCLIENT #Network Filesystem Client > options NFS_ROOT > > options BOOTP > options BOOTP_NFSROOT > options BOOTP_NFSV3 > options BOOTP_WIRED_TO=arge1 > options BOOTP_COMPAT > options ROOTDEVNAME=\"nfs:172.16.0.101:/usr/obj/rb433ah/nfs\" > > > # 802.11 framework > options IEEE80211_DEBUG > options IEEE80211_ALQ > options IEEE80211_SUPPORT_MESH > # This option is currently broken for if_ath_tx. > options IEEE80211_SUPPORT_TDMA > options IEEE80211_AMPDU_AGE > device wlan # 802.11 support > device wlan_wep # 802.11 WEP support > device wlan_ccmp # 802.11 CCMP support > device wlan_tkip # 802.11 TKIP support > device wlan_xauth # 802.11 hostap support > device wlan_acl # 802.11 ACL support > > # Atheros wireless NICs > device ath # Atheros interface support > device ath_pci # Atheros PCI/Cardbus bus > options ATH_DEBUG > options ATH_DIAGAPI > options ATH_ENABLE_11N > options AH_DEBUG > options AH_DEBUG_ALQ > options ALQ > device ath_hal > option AH_SUPPORT_AR5416 > device ath_rate_sample > option AH_RXCFG_SDMAMW_4BYTES > option AH_AR5416_INTERRUPT_MITIGATION > # There's no DFS radar detection support yet so this won't actually > # detect radars. It however does enable the rest of the channel change > # machinery so DFS can be debugged. > option ATH_ENABLE_DFS > > device mii > device arge > #options ARGE_DEBUG # Enable if_arge debugging for now > > #device usb > #options USB_EHCI_BIG_ENDIAN_DESC # handle big-endian byte order > #options USB_DEBUG > #options USB_HOST_ALIGN=32 # AR71XX (MIPS in general?) requires this > #device ehci > > device scbus > #device umass > device da > > device rb4xx > > # On-board SPI flash > device spibus > device ar71xx_spi > device mmc > device mmcsd > device mmcspi > device mx25l > device nand > device ar71xx_wdog > > device uart > device uart_ar71xx > > device loop > device ether > device md > device bpf > device random > device if_bridge > device gif # ip[46] in ip[46] tunneling protocol > device gre # generic encapsulation - only for IPv4 in IPv4 though atm > > # Enable GPIO > device gpio > device gpioled > > options AR71XX_ROUTERBOOT > > > # $FreeBSD$ > hint.apb.0.at="nexus0" > hint.apb.0.irq=4 > > # uart0 > hint.uart.0.at="apb0" > # see atheros/uart_cpu_ar71xx.c why +3 > hint.uart.0.maddr=0x18020003 > hint.uart.0.msize=0x18 > hint.uart.0.irq=3 > > #ohci > #hint.ohci.0.at="apb0" > #hint.ohci.0.maddr=0x1c000000 > #hint.ohci.0.msize=0x01000000 > #hint.ohci.0.irq=6 > > #ehci > #hint.ehci.0.at="nexus0" > #hint.ehci.0.maddr=0x1b000000 > #hint.ehci.0.msize=0x01000000 > #hint.ehci.0.irq=1 > > # pci > hint.pcib.0.at="nexus0" > hint.pcib.0.irq=0 > > hint.arge.0.at="nexus0" > hint.arge.0.maddr=0x19000000 > hint.arge.0.msize=0x1000 > hint.arge.0.irq=2 > # PHY4 = 1 << 4 > hint.arge.0.phymask=0x10 > # Uncomment this hint for RS (not PRO) > # PHY20 = 1 << 20 > # hint.arge.0.phymask=0x100000 > hint.ukphy.0.at="miibus0" > > hint.arge.1.at="nexus0" > hint.arge.1.maddr=0x1a000000 > hint.arge.1.msize=0x1000 > hint.arge.1.irq=3 > # PHY1, PHY2, PHY3 > hint.arge.1.phymask=0x00 > # should be 100 for RS > #hint.arge.1.media=100 > #hint.arge.1.fduplex=1 > # Uncomment this hint for RS (not PRO) > # hint.arge.1.phymask=70000 > > # SPI flash > hint.spi.0.at="nexus0" > hint.spi.0.maddr=0x1f000000 > hint.spi.0.msize=0x10 > > hint.mx25l.0.at="spibus0" > hint.mx25l.0.cs=1 > > hint.rb_cpldbus.0.at="spibus0" > hint.rb_cpldbus.0.cs=1 > # > hint.onand.0.at="nandbus0" > hint.lnand.0.at="nandbus0" > hint.snand.0.at="nandbus0" > > hint.flash.0.at="nand0" > hint.flash.0.size="0x40000" > hint.flash.0.offset="0" > hint.flash.0.name="bootloader" > hint.flash.1.at="nand0" > hint.flash.1.size="0x3c0000" > hint.flash.1.offset="0x40000" > hint.flash.1.name="kernelfs" > hint.flash.2.at="nand0" > hint.flash.2.size="0" > hint.flash.2.offset="0x400000" > hint.flash.2.name="rootfs" > > hint.ar71xx_gpio.0.at="nexus0" > > #hint.rb_nandbusy.0.at="gpiobus0" > > hint.mmcspi.0.at="spibus0" > hint.mmcspi.0.cs=2 > > # Watchdog > hint.ar71xx_wdog.0.at="nexus0" > > > br, > >> >> >> Adrian >> >> >> On 2 January 2013 12:40, Monthadar Al Jaberi <monthadar@gmail.com> wrote: >>> I tested some more. First I changed the miniPCI slot. Now boot looks like this: >>> >>> pcib0 at irq 0 on nexus0 >>> pci0: <PCI bus> on pcib0 >>> ath0: <Atheros 5413> irq 2 at device 19.0 on pci0 >>> ath0: AR5413 mac 10.5 RF5413 phy 6.1 >>> ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0063 >>> >>> >>> Then I created a hostap. But none of my other devices sees it (laptop, iphone). >>> >>> A scan results in: >>> >>> # ifconfig wlan0 scan >>> wlan0: ieee80211_scanreq: flags 0x1b duration 0x7fffffff mindwell 0 >>> maxdwell 0 nssid 0 >>> wlan0: start_scan_locked: active scan, duration 2147483647 mindwell 0 >>> maxdwell 0, desired mode 11g, append, nopick, once >>> wlan0: scan set 11g dwell min 200ms max 200ms >>> wlan0: scan_task: chan 11g -> 11g [active, dwell min 200ms max 200ms] >>> wlan0: ieee80211_ref_node (ieee80211_send_probereq:1822) >>> 0xc6f27000<00:15:6d:67:21:8d> refcnt 4 >>> wlan0: send probe req on channel 11 bssid ff:ff:ff:ff:ff:ff ssid "" >>> wlan0: scan_task: done, [ticks 2657909, dwell min 200 scanend 2150141333] >>> wlan0: notify scan done >>> root@rb433ah:~ # ath0: device timeout >>> >>> And when I try to ping a random IP address I get the following. >>> Interesting is that it seems to "bail out" when it tries to send >>> probe_resp (last in output): >>> $ ping -c 1 172.168.3.2 >>> PING 172.168.3.2 (172.168.3.2): 56 data bytes >>> ath0: device timeout >>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 14 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 46 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5 >>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10 >>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 13 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 14 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>> wlan0: received beacon from 00:11:50:4d:c5:08 rssi 8 >>> wlan0: [00:11:50:4d:c5:08] discard unhandled information element, id 47, len 1 >>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 40 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5 >>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10 >>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 12 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>> wlan0: [94:0c:6d:ad:61:18] discard frame, not to bss >>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 13 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 48 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5 >>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10 >>> wlan0: received probe_req from 00:16:cf:3c:f7:7f rssi 2 >>> [00:16:cf:3c:f7:7f] discard probe_req frame, ssid mismatch: >>> 0x9ccca48e6a3b0c7f661c24413d7b9e54c5e59ddbe0c2bd96a2e65410b662f71a >>> wlan0: received probe_req from 00:16:cf:3c:f7:7f rssi 5 >>> [00:16:cf:3c:f7:7f] discard probe_req frame, ssid mismatch: "default" >>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 12 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>> wlan0: received probe_req from 00:16:cf:3c:f7:7f rssi 4 >>> [00:16:cf:3c:f7:7f] discard probe_req frame, ssid mismatch: "default" >>> wlan0: received beacon from 00:11:50:4d:c5:08 rssi 9 >>> wlan0: [00:11:50:4d:c5:08] discard unhandled information element, id 47, len 1 >>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 46 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5 >>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10 >>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 14 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 40 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5 >>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10 >>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 14 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 43 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5 >>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10 >>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 12 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 40 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5 >>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10 >>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 12 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 45 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5 >>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10 >>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 13 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 13 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 13 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 47 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5 >>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10 >>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 12 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 44 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1 >>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5 >>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10 >>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 14 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14 >>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1 >>> wlan0: received probe_req from 00:aa:70:77:bd:77 rssi 0 >>> wlan0: [00:aa:70:77:bd:77] recv probe req >>> wlan0: ieee80211_ref_node (ieee80211_send_proberesp:2489) >>> 0xc6f27000<00:15:6d:67:21:8d> refcnt 5 >>> wlan0: send probe resp on channel 11 to 00:aa:70:77:bd:77 >>> ath0: ath_raw_xmit: sc_inreset_cnt > 0; bailing >>> .... >>> >>> >>> On Tue, Jan 1, 2013 at 7:33 PM, Monthadar Al Jaberi <monthadar@gmail.com> wrote: >>>> Hi, >>>> >>>> ath(4) failed to attach on my Routerboard RB433AH running FreeBSD >>>> current. This is what I got during boo-up. >>>> >>>> pcib0 at irq 0 on nexus0 >>>> pci0: <PCI bus> on pcib0 >>>> ath0: <Atheros 5413> irq 3 at device 20.0 on pci0 >>>> ath0: could not map interrupt >>>> device_attach: ath0 attach returned 6 >>>> >>>> Any idea why? Anyone else is running ath(4) on this board? My wifi >>>> card is a Ubiquity X2 with AR5413 chip. >>>> >>>> br, >>>> >>>> >>>> -- >>>> Monthadar Al Jaberi >>> >>> >>> >>> -- >>> Monthadar Al Jaberi >>> _______________________________________________ >>> freebsd-wireless@freebsd.org mailing list >>> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless >>> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.org" > > > > -- > Monthadar Al Jaberi -- Monthadar Al Jaberi
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CA%2BsBSoJY7AHjN=cMv6sfXHF4R0_z60c4q9BXEo20jCq6BJGEPg>