Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 4 Jun 2005 00:53:04 -0400 (CDT)
From:      "Raciel Perez Hernandez" <racielprz@minsap.pri.sld.cu>
To:        freebsd-questions@freebsd.org
Subject:   Postfix Problem (urgent)
Message-ID:  <1498.192.168.41.1.1117860784.squirrel@192.168.41.1>

next in thread | raw e-mail | index | archive | help
Helo list I have postfix installed and working, it only have a problem, I
connect to internet trougth a leased line of 144Kbs  but this line
sometimes gets unstable and goes down, so if the connection is down and
somebody try to send a message, postfix tells me (Server replied: 450
<emaildress@anydomain.com>: Recipient address rejected: Domain not found)
and reject the message, I put this two lines on the main.cf file without
any results disable_dns_lookups=3Dyes and deffer_transport=3Dsmtp but pos=
tfix
do not hear me, I need postfix put mail on the queue even if is connected
or not, rigth now it represent a big problem to me Best Regards.
There is my main.cf file.



# Global Postfix configuration file. This file lists only a subset
# of all 300+ parameters. See the postconf(5) manual page for a
# complete list.
#
# The general format of each line is: parameter =3D value. Lines
# that begin with whitespace continue the previous line. A value can
# contain references to other $names or ${name}s.
#
# NOTE - CHANGE NO MORE THAN 2-3 PARAMETERS AT A TIME, AND TEST IF
# POSTFIX STILL WORKS AFTER EVERY CHANGE.

# SOFT BOUNCE
#
# The soft_bounce parameter provides a limited safety net for
# testing.  When soft_bounce is enabled, mail will remain queued that
# would otherwise bounce. This parameter disables locally-generated
# b
ounces, and prevents the SMTP server from rejecting mail permanently
# (by changing 5xx replies into 4xx replies). However, soft_bounce
# is no cure for address rewriting mistakes or mail routing mistakes.
#
#soft_bounce =3D yes

# LOCAL PATHNAME INFORMATION
#
# The queue_directory specifies the location of the Postfix queue.
# This is also the root directory of Postfix daemons that run chrooted.
# See the files in examples/chroot-setup for setting up Postfix chroot
# environments on different UNIX systems.
#
queue_directory =3D /var/spool/postfix

# The command_directory parameter specifies the location of all
# postXXX commands.
#
command_directory =3D /usr/sbin

# The daemon_directory parameter specifies the location of all Postfix
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
#
daemon_directory =3D /usr/libexec/postfix

# QUEUE AND PROCESS OWNERSHIP
#
# The mail_owner parameter specifies the owner of the Postfix queue
# and of most Postfix daemon processes.  Specify the name of a user
# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM.  In
# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
# USER.
#
mail_owner =3D postfix

# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#
#default_privs =3D nobody

# INTERNET HOST AND DOMAIN NAMES
#
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#
myhostname =3D Myhostname.com
#myhostname =3D virtual.domain.tld

# The mydomain parameter specifies the local internet domain name.
# The default is to use $myhostname minus the first component.
# $mydomain is used as a default value for many other configuration
# parameters.
#
#mydomain =3D domain.tld
mydomain =3D Mydomain.cu

# SENDING MAIL
#
# The myorigin parameter specifies the domain that locally-posted
# mail appears to come from. The default is to append $myhostname,
# which is fine for small sites.  If you run a domain with multiple
# machines, you should (1) change this to $mydomain and (2) set up
# a domain-wide alias database that aliases each user to
# user@that.users.mailhost.
#
# For the sake of consistency between sender and recipient addresses,
# myorigin also specifies the default domain name that is appended
# to recipient addresses that have no @domain part.
#
#myorigin =3D $myhostname
#myorigin =3D $mydomain

# RECEIVING MAIL

# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on.  By default,
# the software claims all active interfaces on the machine. The
# parameter also controls delivery of mail to user@[ip.address].
#
# See also the proxy_interfaces parameter, for network addresses that
# are forwarded to us via a proxy or network address translator.
#
# Note: you need to stop/start Postfix when this parameter changes.
#
#inet_interfaces =3D all
#inet_interfaces =3D $myhostname
#inet_interfaces =3D $myhostname, localhost

# The proxy_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on by way of a
# proxy or network address translation unit. This setting extends
# the address list specified with the inet_interfaces parameter.
#
# You must specify your proxy/NAT addresses when your system is a
# backup MX host for other domains, otherwise mail delivery loops
# will happen when the primary MX host is down.
#
#proxy_interfaces =3D
#proxy_interfaces =3D 1.2.3.4
#lo siguiente es la declaracion de que consultas de mysql seran
almacenadas por el
proxy interno de postfix
proxy_read_maps =3D
                proxy:mysql:/etc/postfix/mysql-mydestination.cf,
                proxy:mysql:/etc/postfix/mysql-recipients.cf,
                proxy:mysql:/etc/postfix/mysql-virtual.cf,
                proxy:mysql:/etc/postfix/mysql-canonical.cf,
                proxy:mysql:/etc/postfix/mysql-sender-access.cf
                proxy:mysql:/etc/postfix/mysql-login-mismatch.cf
                proxy:unix:passwd.byname
# The mydestination parameter specifies the list of domains that this
# machine considers itself the final destination for.
#
# These domains are routed to the delivery agent specified with the
# local_transport parameter setting. By default, that is the UNIX
# compatible delivery agent that lookups all recipients in /etc/passwd
# and /etc/aliases or their equivalent.
#
# The default is $myhostname + localhost.$mydomain.  On a mail domain
# gateway, you should also include $mydomain.
#
# Do not specify the names of virtual domains - those domains are
# specified elsewhere (see VIRTUAL_README).
#
# Do not specify the names of domains that this machine is backup MX
# host for. Specify those names via the relay_domains settings for
# the SMTP server, or use permit_mx_backup if you are lazy (see
# STANDARD_CONFIGURATION_README).
#
# The local machine is always the final destination for mail addressed
# to user@[the.net.work.address] of an interface that the mail system
# receives mail on (see the inet_interfaces parameter).
#
# Specify a list of host or domain names, /file/name or type:table
# patterns, separated by commas and/or whitespace. A /file/name
# pattern is replaced by its contents; a type:table is matched when
# a name matches a lookup key (the right-hand side is ignored).
# Continue long lines by starting the next line with whitespace.
#
# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
#
#mydestination =3D $myhostname, localhost.$mydomain, localhost
#mydestination =3D $myhostname, localhost.$mydomain, localhost, $mydomain
#mydestination =3D $myhostname, localhost.$mydomain, localhost,
#$mydomain,
#        mail.$mydomain, www.$mydomain, ftp.$mydomain
mydestination =3D 127.0.0.1, Mydomain.cu, mx1.$mydomain, $mydomain,
proxy:mysql:/etc/postfix/mysql-mydestination.cf
# REJECTING MAIL FOR UNKNOWN LOCAL USERS
#
# The local_recipient_maps parameter specifies optional lookup tables
# with all names or addresses of users that are local with respect
# to $mydestination, $inet_interfaces or $proxy_interfaces.
#
# If this parameter is defined, then the SMTP server will reject
# mail for unknown local users. This parameter is defined by default.
#
# To turn off local recipient checking in the SMTP server, specify
# local_recipient_maps =3D (i.e. empty).
#
# The default setting assumes that you use the default Postfix local
# delivery agent for local delivery. You need to update the
# local_recipient_maps setting if:
#
# - You define $mydestination domain recipients in files other than
#   /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
#   For example, you define $mydestination domain recipients in
#   the $virtual_mailbox_maps files.
#
# - You redefine the local delivery agent in master.cf.
#
# - You redefine the "local_transport" setting in main.cf.
#
# - You use the "luser_relay", "mailbox_transport", or "fallback_transpor=
t"
#   feature of the Postfix local delivery agent (see local(8)).
#
# Details are described in the LOCAL_RECIPIENT_README file.
#
# Beware: if the Postfix SMTP server runs chrooted, you probably have
# to access the passwd file via the proxymap service, in order to
# overcome chroot restrictions. The alternative, having a copy of
# the system passwd file in the chroot jail is just not practical.
#
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify a bare username, an @domain.tld
# wild-card, or specify a user@domain.tld address.
#
#local_recipient_maps =3D unix:passwd.byname $alias_maps
#local_recipient_maps =3D unix:passwd.byname $alias_maps
local_recipient_maps =3D $alias_maps,
proxy:mysql:/etc/postfix/mysql-recipients.cf

# The unknown_local_recipient_reject_code specifies the SMTP server
# response code when a recipient domain matches $mydestination or
# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
# and the recipient address or address local-part is not found.
#
# The default setting is 550 (reject mail) but it is safer to start
# with 450 (try again later) until you are certain that your
# local_recipient_maps settings are OK.
#
#usaremos 550 para trabajar mejor con mailman
unknown_local_recipient_reject_code =3D 550
#unknown_local_recipient_reject_code =3D 450
# TRUST AND RELAY CONTROL

# The mynetworks parameter specifies the list of "trusted" SMTP
# clients that have more privileges than "strangers".
#
# In particular, "trusted" SMTP clients are allowed to relay mail
# through Postfix.  See the smtpd_recipient_restrictions parameter
# in postconf(5).
#
# You can specify the list of "trusted" network addresses by hand
# or you can let Postfix do it for you (which is the default).
#
# By default (mynetworks_style =3D subnet), Postfix "trusts" SMTP
# clients in the same IP subnetworks as the local machine.
# On Linux, this does works correctly only with interfaces specified
# with the "ifconfig" command.
#
# Specify "mynetworks_style =3D class" when Postfix should "trust" SMTP
# clients in the same IP class A/B/C networks as the local machine.
# Don't do this with a dialup site - it would cause Postfix to "trust"
# your entire provider's network.  Instead, specify an explicit
# mynetworks list by hand, as described below.
#
# Specify "mynetworks_style =3D host" when Postfix should "trust"
# only the local machine.
#
#mynetworks_style =3D class
#mynetworks_style =3D subnet
#mynetworks_style =3D host
#mynetworks_style =3D subnet
# Alternatively, you can specify the mynetworks list by hand, in
# which case Postfix ignores the mynetworks_style setting.
#
# Specify an explicit list of network/netmask patterns, where the
# mask specifies the number of bits in the network part of a host
# address.
#
# You can also specify the absolute pathname of a pattern file instead
# of listing the patterns here. Specify type:table for table-based lookup=
s
# (the value on the table right-hand side is not used).
#
#mynetworks =3D 168.100.189.0/28, 127.0.0.0/8
mynetworks =3D 192.168.40.1/32, 192.168.41.1/32,
#mynetworks =3D $config_directory/mynetworks
#mynetworks =3D hash:/etc/postfix/network_table

# The relay_domains parameter restricts what destinations this system wil=
l
# relay mail to.  See the smtpd_recipient_restrictions description in
# postconf(5) for detailed information.
#
# By default, Postfix relays mail
# - from "trusted" clients (IP address matches $mynetworks) to any
destination,
# - from "untrusted" clients to destinations that match $relay_domains or
#   subdomains thereof, except addresses with sender-specified routing.
# The default relay_domains value is $mydestination.
#
# In addition to the above, the Postfix SMTP server by default accepts ma=
il
# that Postfix is final destination for:
# - destinations that match $inet_interfaces or $proxy_interfaces,
# - destinations that match $mydestination
# - destinations that match $virtual_alias_domains,
# - destinations that match $virtual_mailbox_domains.
# These destinations do not need to be listed in $relay_domains.
#
# Specify a list of hosts or domains, /file/name patterns or type:name
# lookup tables, separated by commas and/or whitespace.  Continue
# long lines by starting the next line with whitespace. A file name
# is replaced by its contents; a type:name table is matched when a
# (parent) domain appears as lookup key.
#
# NOTE: Postfix will not automatically forward mail for domains that
# list this system as their primary or backup MX host. See the
# permit_mx_backup restriction description in postconf(5).
#
#relay_domains =3D $mydestination
#Comenzaremos aceptando correo para nuestro dominio, por Raciel
relay_domains =3D $mydomain
# INTERNET OR INTRANET

# The relayhost parameter specifies the default host to send mail to
# when no entry is matched in the optional transport(5) table. When
# no relayhost is given, mail is routed directly to the destination.
#
# On an intranet, specify the organizational domain name. If your
# internal DNS uses no MX records, specify the name of the intranet
# gateway host instead.
#
# In the case of SMTP, specify a domain, host, host:port, [host]:port,
# [address] or [address]:port; the form [host] turns off MX lookups.
#
# If you're connected via UUCP, see also the default_transport parameter.
#
transport_maps =3D hash:/etc/postfix/transport
#relayhost =3D $mydomain
relayhost =3D [myrelayhost.cu]
defer_transport =3D smtp
#relayhost =3D [gateway.my.domain]
#relayhost =3D [mailserver.isp.tld]
#relayhost =3D uucphost
#relayhost =3D [an.ip.add.ress]
#relayhost =3D [princesa]
#default_transport =3D uucp
#default_transport =3D uucp:princesa
# REJECTING UNKNOWN RELAY USERS
#
# The relay_recipient_maps parameter specifies optional lookup tables
# with all addresses in the domains that match $relay_domains.
#
# If this parameter is defined, then the SMTP server will reject
# mail for unknown relay users. This feature is off by default.
#
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify an @domain.tld wild-card, or specify
# a user@domain.tld address.
#
#relay_recipient_maps =3D hash:/etc/postfix/relay_recipients

# INPUT RATE CONTROL
#
# The in_flow_delay configuration parameter implements mail input
# flow control. This feature is turned on by default, although it
# still needs further development (it's disabled on SCO UNIX due
# to an SCO bug).
#
# A Postfix process will pause for $in_flow_delay seconds before
# accepting a new message, when the message arrival rate exceeds the
# message delivery rate. With the default 100 SMTP server process
# limit, this limits the mail inflow to 100 messages a second more
# than the number of messages delivered per second.
#
# Specify 0 to disable the feature. Valid delays are 0..10.
#
#in_flow_delay =3D 1s

# ADDRESS REWRITING
#
# The ADDRESS_REWRITING_README document gives information about
# address masquerading or other forms of address rewriting including
# username->Firstname.Lastname mapping.

# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
#
# The VIRTUAL_README document gives information about the many forms
# of domain hosting that Postfix supports.

# "USER HAS MOVED" BOUNCE MESSAGES
#
# See the discussion in the ADDRESS_REWRITING_README document.

# TRANSPORT MAP
#
# See the discussion in the ADDRESS_REWRITING_README document.

# ALIAS DATABASE
#
# The alias_maps parameter specifies the list of alias databases used
# by the local delivery agent. The default list is system dependent.
#
# On systems with NIS, the default is to search the local alias
# database, then the NIS alias database. See aliases(5) for syntax
# details.
#
# If you change the alias database, run "postalias /etc/aliases" (or
# wherever your system stores the mail alias file), or simply run
# "newaliases" to build the necessary DBM or DB file.
#
# It will take a minute or so before changes become visible.  Use
# "postfix reload" to eliminate the delay.
#
#alias_maps =3D dbm:/etc/aliases
#para desabilitar NIS
alias_maps =3D $alias_database, hash:/usr/local/mailman/data/aliases
#alias_maps =3D hash:/etc/aliases
#alias_maps =3D hash:/etc/aliases, nis:mail.aliases
#alias_maps =3D netinfo:/aliases
# The alias_database parameter specifies the alias database(s) that
# are built with "newaliases" or "sendmail -bi".  This is a separate
# configuration parameter, because alias_maps (see above) may specify
# tables that are not necessarily all under control by Postfix.
#
#alias_database =3D dbm:/etc/aliases
#alias_database =3D dbm:/etc/mail/aliases
alias_database =3D hash:/etc/aliases
#alias_database =3D hash:/etc/aliases, hash:/opt/majordomo/aliases

# ADDRESS EXTENSIONS (e.g., user+foo)
#
# The recipient_delimiter parameter specifies the separator between
# user names and address extensions (user+foo). See canonical(5),
# local(8), relocated(5) and virtual(5) for the effects this has on
# aliases, canonical, virtual, relocated and .forward file lookups.
# Basically, the software tries user+foo and .forward+foo before
# trying user and .forward.
# Para Mailman descomentaremos la siguiente linea
recipient_delimiter =3D +

# DELIVERY TO MAILBOX
#
# The home_mailbox parameter specifies the optional pathname of a
# mailbox file relative to a user's home directory. The default
# mailbox file is /var/spool/mail/user or /var/mail/user.  Specify
# "Maildir/" for qmail-style delivery (the / is required).
#
#home_mailbox =3D Mailbox
#home_mailbox =3D Maildir/

# The mail_spool_directory parameter specifies the directory where
# UNIX-style mailboxes are kept. The default setting depends on the
# system type.
#
#mail_spool_directory =3D /var/mail
#mail_spool_directory =3D /var/spool/mail

# The mailbox_command parameter specifies the optional external
# command to use instead of mailbox delivery. The command is run as
# the recipient with proper HOME, SHELL and LOGNAME environment settings.
# Exception:  delivery for root is done as $default_user.
#
# Other environment variables of interest: USER (recipient username),
# EXTENSION (address extension), DOMAIN (domain part of address),
# and LOCAL (the address localpart).
#
# Unlike other Postfix configuration parameters, the mailbox_command
# parameter is not subjected to $parameter substitutions. This is to
# make it easier to specify shell syntax (see example below).
#
# Avoid shell meta characters because they will force Postfix to run
# an expensive shell process. Procmail alone is expensive enough.
#
# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
#
#mailbox_command =3D /some/where/procmail
#mailbox_command =3D /some/where/procmail -a "$EXTENSION"

# The mailbox_transport specifies the optional transport in master.cf
# to use after processing aliases and .forward files. This parameter
# has precedence over the mailbox_command, fallback_transport and
# luser_relay parameters.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf.  The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#
#mailbox_transport =3D lmtp:unix:/file/name
mailbox_transport =3D cyrus

# The fallback_transport specifies the optional transport in master.cf
# to use for recipients that are not found in the UNIX passwd database.
# This parameter has precedence over the luser_relay parameter.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf.  The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#
#fallback_transport =3D lmtp:unix:/file/name
#fallback_transport =3D cyrus
#fallback_transport =3D

# The luser_relay parameter specifies an optional destination address
# for unknown recipients.  By default, mail for unknown@$mydestination,
# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
# as undeliverable.
#
# The following expansions are done on luser_relay: $user (recipient
# username), $shell (recipient shell), $home (recipient home directory),
# $recipient (full recipient address), $extension (recipient address
# extension), $domain (recipient domain), $local (entire recipient
# localpart), $recipient_delimiter. Specify ${name?value} or
# ${name:value} to expand value only when $name does (does not) exist.
#
# luser_relay works only for the default Postfix local delivery agent.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must specify "local_recipient_maps =3D" (i.e. empty) in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#
#luser_relay =3D $user@other.host
#luser_relay =3D $local@other.host
#luser_relay =3D admin+$local
#luser_relay =3D /dev/null
# JUNK MAIL CONTROLS
#
# The controls listed here are only a very small subset. The file
# SMTPD_ACCESS_README provides an overview.

# The header_checks parameter specifies an optional table with patterns
# that each logical message header is matched against, including
# headers that span multiple physical lines.
#
# By default, these patterns also apply to MIME headers and to the
# headers of attached messages. With older Postfix versions, MIME and
# attached message headers were treated as body text.
#
# For details, see "man header_checks".
#
#header_checks =3D regexp:/etc/postfix/header_checks

# FAST ETRN SERVICE
#
# Postfix maintains per-destination logfiles with information about
# deferred mail, so that mail can be flushed quickly with the SMTP
# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
# See the ETRN_README document for a detailed description.
#
# The fast_flush_domains parameter controls what destinations are
# eligible for this service. By default, they are all domains that
# this server is willing to relay mail to.
#
#fast_flush_domains =3D $relay_domains

# SHOW SOFTWARE VERSION OR NOT
#
# The smtpd_banner parameter specifies the text that follows the 220
# code in the SMTP server's greeting banner. Some people like to see
# the mail version advertised. By default, Postfix shows no version.
#
# You MUST specify $myhostname at the start of the text. That is an
# RFC requirement. Postfix itself does not care.
#
#smtpd_banner =3D $myhostname ESMTP $mail_name
#smtpd_banner =3D $myhostname ESMTP $mail_name ($mail_version)
smtpd_banner =3D $myhostname ESMTP Bienvenido
# PARALLEL DELIVERY TO THE SAME DESTINATION
#
# How many parallel deliveries to the same user or domain? With local
# delivery, it does not make sense to do massively parallel delivery
# to the same user, because mailbox updates must happen sequentially,
# and expensive pipelines in .forward files can cause disasters when
# too many are run at the same time. With SMTP deliveries, 10
# simultaneous connections to the same domain could be sufficient to
# raise eyebrows.
#
# Each message delivery transport has its XXX_destination_concurrency_lim=
it
# parameter.  The default is $default_destination_concurrency_limit for
# most delivery transports. For the local delivery agent the default is 2=
.

#local_destination_concurrency_limit =3D 2
#default_destination_concurrency_limit =3D 20

# DEBUGGING CONTROL
#
# The debug_peer_level parameter specifies the increment in verbose
# logging level when an SMTP client or server host name or address
# matches a pattern in the debug_peer_list parameter.
#
debug_peer_level =3D 2

# The debug_peer_list parameter specifies an optional list of domain
# or network patterns, /file/name patterns or type:name tables. When
# an SMTP client or server host name or address matches a pattern,
# increase the verbose logging level by the amount specified in the
# debug_peer_level parameter.
#
#debug_peer_list =3D 127.0.0.1
#debug_peer_list =3D some.domain

# The debugger_command specifies the external command that is executed
# when a Postfix daemon program is run with the -D option.
#
# Use "command .. & sleep 5" so that the debugger can attach before
# the process marches on. If you use an X-based debugger, be sure to
# set up your XAUTHORITY environment variable before starting Postfix.
#
debugger_command =3D
         PATH=3D/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
         xxgdb $daemon_directory/$process_name $process_id & sleep 5

# If you don't have X installed on the Postfix machine, try:
# debugger_command =3D
#        PATH=3D/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
#        echo where) | gdb $daemon_directory/$process_name $process_id 2>=
&1
#        >$config_directory/$process_name.$process_id.log & sleep 5

# INSTALL-TIME CONFIGURATION INFORMATION
#
# The following parameters are used when installing a new Postfix version=
.
#
# sendmail_path: The full pathname of the Postfix sendmail command.
# This is the Sendmail-compatible mail posting interface.
#
sendmail_path =3D /usr/sbin/sendmail

# newaliases_path: The full pathname of the Postfix newaliases command.
# This is the Sendmail-compatible command to build alias databases.
#
newaliases_path =3D /usr/bin/newaliases

# mailq_path: The full pathname of the Postfix mailq command.  This
# is the Sendmail-compatible mail queue listing command.
#
mailq_path =3D /usr/bin/mailq

# setgid_group: The group for mail submission and queue management
# commands.  This must be a group name with a numerical group ID that
# is not shared with other accounts, not even with the Postfix account.
#
setgid_group =3D postdrop

# html_directory: The location of the Postfix HTML documentation.
#
html_directory =3D /var/www/html/doc/postfix

# manpage_directory: The location of the Postfix on-line manual pages.
#
manpage_directory =3D /usr/local/man

# sample_directory: The location of the Postfix sample configuration file=
s.
# This parameter is obsolete as of Postfix 2.1.
#
sample_directory =3D /etc/postfix

# readme_directory: The location of the Postfix README files.
#
readme_directory =3D /usr/local/share/postfix
virtual_alias_maps =3D hash:/usr/local/mailman/data/virtual-mailman,
proxy:mysql:/etc/postfix/mysql-virtual.cf
#virtual_alias_maps =3D proxy:mysql:/etc/postfix/mysql-virtual.cf
sender_canonical_maps =3D proxy:mysql:/etc/postfix/mysql-canonical.cf
#no permitir mensajes mayores de 1.5MB
message_size_limit =3D 1536000
#smtpd_delay_reject=3Dyes
#SMTP authentication
smtpd_sasl_auth_enable =3D yes
smtpd_sasl_security_options =3D noanonymous
smtpd_sasl_local_domain =3D
broken_sasl_auth_clients =3D yes
smtpd_clients_restrictions =3D permit_mynetworks, permit_sasl_authenticat=
ed,
reject
#tabla para comprobar usuario y contra direccion de correo
smtpd_sender_login_maps =3D proxy:mysql:/etc/postfix/mysql-login-mismatch=
.cf
smtpd_sender_restrictions =3D reject_sender_login_mismatch
#TLS
## TLS
#  Transport Layer Security
#  TLS-Patch by Lutz J????????nicke
#
smtpd_use_tls =3D yes
#smtpd_tls_auth_only =3D yes
smtpd_tls_key_file =3D /etc/postfix/server.pem
smtpd_tls_cert_file =3D /etc/postfix/server.pem
smtpd_tls_CAfile =3D /etc/postfix/server.pem
smtpd_tls_loglevel =3D 3
smtpd_tls_received_header =3D yes
smtpd_tls_session_cache_timeout =3D 3600s
tls_random_source =3D dev:/dev/urandom
#Spam
smtpd_helo_required =3D yes
#smtp restriccions
smtpd_delay_reject=3Dyes
smtpd_restriction_classes =3D cu
cu =3D check_recipient_access pcre:/etc/postfix/pcre_cu
#cu =3D check_recipient_access regexp:/etc/postfix/dominio_cu, reject
#all =3D permit
smtpd_recipient_restrictions =3D
    reject_invalid_hostname,
    reject_non_fqdn_sender,
    reject_non_fqdn_recipient,
    reject_unknown_sender_domain,
    reject_unknown_recipient_domain,
    check_sender_access proxy:mysql:/etc/postfix/mysql-sender-access.cf,
permit_sasl_authenticated, permit_mynetworks,
#    reject_unauth_destination,
#    permit_sasl_authenticated,
    reject_unauth_pipelining,
    reject
#revisemos los headers ahora
#mime_header_checks=3Dpcre:/etc/postfix/body_checks

#como hacemos uucp por ahora desabilitamos dns_lookups
disable_dns_lookups =3D yes
content_filter =3D smtp-amavis:[127.0.0.1]:10024
#Para Mailman
owner_request_special =3D no
#Fin Para mailman






Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1498.192.168.41.1.1117860784.squirrel>