Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 9 Feb 1997 20:17:06 -0800 (PST)
From:      Archie Cobbs <archie@whistle.com>
To:        Andrew.Gordon@net-tel.co.uk
Cc:        smp@csn.net, hardware@freebsd.org, multimedia@freebsd.org
Subject:   Re: Re(2): isdn cards
Message-ID:  <199702100417.UAA00491@bubba.whistle.com>
In-Reply-To: <"be7-970210002711-4D07*/G=Andrew/S=Gordon/O=NET-TEL Computer from "Andrew.Gordon@net-tel.co.uk" at "Feb 10, 97 00:27:45 am"

Next in thread | Raw E-Mail | Index | Archive | Help

> > I have just been kicking around the idea of using the motorola isdn
> > bitsurfr pro ISA (ie, the internal card as oppossed to the external
> > device) as one would the external device.  Specifically the box says
> > is uses an internal 16550 with the standard AT command set.  So given
> > that I have already setup a PPP connection on FreeBSD with kernel PPP
> > and an external bitsurfr, wouldn't it also be possible to do the same
> > with the ISA card version (although I suspect I would have no access to
> > the fancy SOHO features till a true driver was written)?
> > Has anyone tried this?
> 
> Are you sure that the internal bitsurfr is actually any different to
> the external (in the sense that an internal modem is no different
> to an external one).  On the one hand, if it really does emulate
> a 16550 faithfully, it will work straight away but give you all 
> the limitations of an external TA; on the other hand, if it doesn't
> you will be straight into writing a device driver for undocumented
> hardware before you even get started.

It's both... the internal bitsurfr has a COM port emulation as well
as a higher speed (ie., > 115200 bps) proprietary interface.

-Archie

___________________________________________________________________________
Archie Cobbs   *   Whistle Communications, Inc.  *   http://www.whistle.com



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?199702100417.UAA00491>