Date: Sun, 24 Sep 2000 01:00:15 +0200 From: Bernd Walter <ticso@cicely8.cicely.de> To: John Baldwin <jhb@FreeBSD.ORG> Cc: smp@FreeBSD.ORG, cp@bsdi.com, alpha@FreeBSD.ORG Subject: Re: Status update Message-ID: <20000924010015.A68775@cicely8.cicely.de> In-Reply-To: <XFMail.000923003422.jhb@FreeBSD.org>; from jhb@FreeBSD.ORG on Sat, Sep 23, 2000 at 12:34:22AM -0700 References: <XFMail.000923003422.jhb@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, Sep 23, 2000 at 12:34:22AM -0700, John Baldwin wrote: > I'll be updating my patchset at > http://www.FreeBSD.org/~jhb/patches/alpha.ithreads.patch shortly. If you have > time, please test this stuff out so we can get it committed. Thanks. It still doesn't work for me: Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #0: Sun Sep 24 00:14:11 CEST 2000 ticso@cicely9.cicely.de:/var/d7/src-2000-09-23/src/sys/compile/CICELY9 EB164 Digital AlphaPC 164 500 MHz, 500MHz 8192 byte page size, 1 processor. CPU: EV56 (21164A) major=7 minor=2 extensions=0x1<BWX> OSF PAL rev: 0x1000800020117 real memory = 265904128 (259672K bytes) avail memory = 253419520 (247480K bytes) Preloaded elf kernel "kernel.ko" at 0xfffffc0000628000. ../../kern/kern_fork.c:537:fork1() spl0 needs fixing cia0: <2117x Core Logic chipset> cia0: ALCOR/ALCOR2, pass 3 cia0: extended capabilities: 21<DWEN,BWEN> pcib0: <2117x PCI host bus adapter> on cia0 pci0: <PCI bus> on pcib0 sym0: <895> port 0x10200-0x102ff mem 0x82030000-0x82030fff,0x82031200-0x820312ff irq 2 at device 5.0 on pci0 sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: interrupting at CIA irq 2 sym1: <810a> port 0x10100-0x101ff mem 0x82031100-0x820311ff irq 0 at device 6.0 on pci0 sym1: No NVRAM, ID 7, Fast-10, SE, parity checking sym1: interrupting at CIA irq 0 sym2: <810a> port 0x10000-0x100ff mem 0x82031000-0x820310ff irq 1 at device 7.0 on pci0 sym2: No NVRAM, ID 7, Fast-10, SE, parity checking sym2: interrupting at CIA irq 1 isab0: <Intel 82378IB PCI to ISA bridge> at device 8.0 on pci0 isa0: <ISA bus> on isab0 xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x10300-0x1037f mem 0x82031300-0x8203137f irq 3 at device 9.0 on pci0 xl0: interrupting at CIA irq 3 xl0: Ethernet address: 00:10:5a:30:1c:1a miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto atapci0: <CMD 646 ATA controller> port 0x10380-0x1038f irq 5 at device 11.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: interrupting at ISA irq 14 fdc0: cannot reserve I/O port range mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0 sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A, console sio0: interrupting at ISA irq 4 sio1: reserved for low-level i/o Timecounter "i8254" frequency 1193182 Hz Timecounter "alpha" frequency 500006125 Hz ad0: 1219MB <Conner Peripherals 1275MB - CFS1275A> [2477/16/63] at ata0-master WDMA2 Waiting 15 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. And nothing more happens... boot -v shows this: [...] ata0-master: success setting WDMA2 on CMD646 chip ad0: <Conner Peripherals 1275MB - CFS1275A/0.28> ATA-0 disk at ata0-master ad0: 1219MB (2496816 sectors), 2477 cyls, 16 heads, 63 S/T, 512 B/S ad0: 1 secs/int, 1 depth queue, WDMA2 ad0: piomode=4 dmamode=2 udmamode=-1 cblid=0 Creating DISK ad0 Waiting 15 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. sym0: enabling clock multiplier sym0: Downloading SCSI SCRIPTS. (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered. (noperiph:sym2:0:-1:-1): SCSI BUS reset delivered. (probe15:sym1:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe15:sym1:0:0:0): ILLEGAL REQUEST asc:24,0 (probe15:sym1:0:0:0): Invalid field in CDB sks:c0,2 (probe16:sym1:0:1:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe16:sym1:0:1:0): ILLEGAL REQUEST asc:24,0 (probe16:sym1:0:1:0): Invalid field in CDB sks:c0,2 (probe17:sym1:0:2:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe17:sym1:0:2:0): ILLEGAL REQUEST asc:24,0 (probe17:sym1:0:2:0): Invalid field in CDB sks:c0,2 (probe18:sym1:0:3:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe18:sym1:0:3:0): ILLEGAL REQUEST asc:24,0 (probe18:sym1:0:3:0): Invalid field in CDB sks:c0,2 (probe19:sym1:0:4:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe19:sym1:0:4:0): ILLEGAL REQUEST asc:24,0 (probe19:sym1:0:4:0): Invalid field in CDB sks:c0,2 The SCSI messages are normal for the disks. Sometimes it comes to print the first SCSI "Creating Disk" lines. -- B.Walter COSMO-Project http://www.cosmo-project.de ticso@cicely.de Usergroup info@cosmo-project.de To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000924010015.A68775>