Date: Tue, 26 Jun 2001 17:56:29 +0100 From: "SD" <s.d@subdimension.com> To: "Josh Paetzel" <jpaetzel@hutchtel.net>, <freebsd-questions@FreeBSD.ORG> Subject: Re: Cant get Adaptec 1520 SCSI (ISA Bus) to work in 4.3 Message-ID: <001b01c0fe60$f2dd5180$f38a69d5@zen> References: <000a01c0fdb4$3825b5f0$2506ff3e@zen> <01062520091901.00512@mark9.vladsempire.net>
next in thread | previous in thread | raw e-mail | index | archive | help
----- Original Message -----
From: "Josh Paetzel" <jpaetzel@hutchtel.net>
To: "SD" <s.d@subdimension.com>; <freebsd-questions@FreeBSD.ORG>
Sent: Tuesday, June 26, 2001 2:09 AM
Subject: Re: Cant get Adaptec 1520 SCSI (ISA Bus) to work in 4.3
> On Monday 25 June 2001 15:20, SD wrote:
> > I bought an Adaptec ISA 1520 SCSI controller ('new' - box unopened) -
> >
> > mainly as I believed that it was pretty much 'Industry Standard' and
> >
> > would thus work well with all my OS's... ;-)
> >
> > BSD 4.3 Release isnt happy ..
> >
> > I have recompiled with 'aic' present in the kernel and after RTFM made
> >
> > sure that all that else that *seemed* to be required was also enabled.
> >
> > On reboot dmesg reports:
> >
> > isa0 - too many dependant configs (8)
> >
> > at the point of probing the controller.
> >
> > Has anyone got one of these to work with 4.3?
> >
> > Surely it must be one of the most ordinary / poular ISA SCSI cards ever
> >
> > - so it cant be too much of a prob? ;-)
>
> Have you made sure that the jumpers are set to the resources that the
driver
> is expecting the card to use? The driver really seems to want the card
to
> be on irq 11 and I/O address 0x0140. Most likely you are having some sort
of
> conflict in your system with irq 11.
>
> I dug one of those up from the back room and checked it out on a
4.3-STABLE
> machine from last weekend. It seemed to work just fine.
>
> Josh
>
Thanks Josh,
Yep its on IRQ11 alright - and no conflicts.
Its a dual boot machine and Win2k is having no probs at all .. for what
thats worth ;-)
I guess that I am going to set the card up in non P&P - fully manual mode
and see what happens
Cheers
S
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001b01c0fe60$f2dd5180$f38a69d5>