Date: Wed, 25 Aug 2004 13:16:08 -0500 From: edwinculp <edwinculp@prodigy.net.mx> To: Steven Friedrich <FreeBSD@InsightBB.com> Cc: freebsd-questions@freebsd.org Subject: Re: apsfilter and Epson Stylus C63 on Current Message-ID: <88cb688d3e.88d3e88cb6@prodigy.net.mx>
next in thread | raw e-mail | index | archive | help
Steven=2C that was it=2C THANK YOU ! It works great! = That is one of the disadvantages to portinstall and portupgrade=2E I mis= sed the make=2Econf message=2E Someone else tried to tell me that but I = wasn=27t listening=2E Your message was precise and it was working in min= utes=2E Thanks again=2C ed Now off to try to print on the network=2E ----- Mensaje original ----- De=3A Steven Friedrich =3CFreeBSD=40InsightBB=2Ecom=3E Fecha=3A Mi=E9rcoles=2C Agosto 25=2C 2004 12=3A35 pm Asunto=3A Re=3A apsfilter and Epson Stylus C63 on Current =3E On Tuesday 24 August 2004 08=3A21 am=2C edwinculp wrote=3A =3E =3E ----- Mensaje original ----- =3E =3E De=3A Anish Mistry =3Cmistry=2E7=40osu=2Eedu=3E =3E =3E Fecha=3A Lunes=2C Agosto 23=2C 2004 11=3A59 pm =3E =3E Asunto=3A Re=3A apsfilter and Epson Stylus C63 on Current =3E =3E =3E =3E =3E -----BEGIN PGP SIGNED MESSAGE----- =3E =3E =3E Hash=3A SHA1 =3E =3E =3E =3E =3E =3E Just to check=2C you have removed the base install=27s lp* ut= ilities =3E =3E =3E right=3F =3E =3E =3E =3E No=2C I must have read over=2C under=2C around and/or through tha= t in = =3E the cups =3E =3E howto=27s I been using=2E =3E =3E =3E =3E Let me be sure that I am understanding=2E I should remove lpd=2C= = =3E lpq=2C lpc=2C =3E =3E lpr=2C lprm and family to use cups=3F =3E =3E =3E =3E That could definitely be the problem because I have=27t done it=2E= =3E =3E =3E =3E Thanks=2C I=27ll give it a try in a few=2E =3E =3E =3E =3E ed =3E =3E =3E =3E =5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F= =5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F= =3E =3E freebsd-questions=40freebsd=2Eorg mailing list =3E =3E http=3A//lists=2Efreebsd=2Eorg/mailman/listinfo/freebsd-questions= =3E =3E To unsubscribe=2C send any mail to =3E =3E =22freebsd-questions-unsubscribe=40freebsd=2Eorg=22 =3E = =3E Actually=2C all you need do is follow the instructions at the bottom = =3E of the = =3E Makefile in /usr/ports/print/cups-lpr =3E = =3E It says to add two lines to /etc/make=2Econf =3E = =3E And if you=27ve done a installworld since you=27ve installed cups-lpr= =2C = =3E just = =3E deinstall=2C reinstall cups-lpr=2E =3E = =3E Before you begin=2C try which lpr=2E =3E = =3E which will report which lpr command is found first via the path = =3E variable=2E I = =3E suspect it will say /usr/bin/lpr=2E After you perform the above = =3E steps=2C it=27ll = =3E say /usr/local/bin/lpr=2E =3E = =3E =5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F= =5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F =3E freebsd-questions=40freebsd=2Eorg mailing list =3E http=3A//lists=2Efreebsd=2Eorg/mailman/listinfo/freebsd-questions =3E To unsubscribe=2C send any mail to =22freebsd-questions- =3E unsubscribe=40freebsd=2Eorg=22
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?88cb688d3e.88d3e88cb6>