Date: Sun, 17 Feb 2002 23:06:46 +0000 From: Bob Bishop <rb@gid.co.uk> To: hackers@freebsd.org Subject: Multicast problem with sis interface? Message-ID: <l03130305b895e194ff71@[194.32.164.2]>
next in thread | raw e-mail | index | archive | help
Hi,
Seems there might be some problem with multicast on sis interfaces.
Specifically, netatalk doesn't work right on this box through the sis
interface but it's fine through the RealTek.
This is the onboard interface on a K7S5A m/b, dmesg follows. Ideas, anyone? TIA
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-RELEASE #1: Sun Feb 17 16:18:51 GMT 2002
rb@gid-dhcp14.gid.co.uk:/usr/src/sys/compile/SEAGOON
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Duron(tm) Processor (995.77-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x670 Stepping = 0
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T
,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 268435456 (262144K bytes)
avail memory = 256499712 (250488K bytes)
Preloaded elf kernel "kernel" at 0xc049a000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00f7790
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <PCI to PCI bridge (vendor=1039 device=0001)> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
isab0: <SiS 85c503 PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xcbfed000-0xcbfedfff irq 12 at device 2.2
on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xcbfee000-0xcbfeefff irq 11 at device 2.3
on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 5591 ATA100 controller> port 0xff00-0xff0f at device 2.5 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x1039, dev=0x7012) at 2.7 irq 5
sis0: <SiS 900 10/100BaseTX> port 0xd000-0xd0ff mem 0xcbfec000-0xcbfecfff
irq 12
at device 3.0 on pci0
sis0: Ethernet address: 00:d0:09:e9:e9:7e
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <S3 Trio 64V2/DX/GX graphics accelerator> at 9.0 irq 0
rl0: <RealTek 8139 10/100BaseTX> port 0xcc00-0xccff mem
0xcbfebf00-0xcbfebfff ir
q 5 at device 11.0 on pci0
rl0: Ethernet address: 00:50:bf:32:ca:db
miibus1: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xdc00-0xdcff mem
0xcbfef000-0xcbfe
ffff irq 5 at device 13.0 on pci0
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs
pcib1: <SiS 5591 host to AGP bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcc7ff,0xd0000-0xd7fff on
isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 58644MB <IC35L060AVER07-0> [119150/16/63] at ata0-master UDMA100
ad2: 58644MB <IC35L060AVER07-0> [119150/16/63] at ata1-master UDMA100
Waiting 5 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 6 lun 0
da0: <IBM LPS540S !W 590K> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 8)
da0: 516MB (1057616 512 byte sectors: 64H 32S/T 516C)
--
Bob Bishop (0118) 977 4017 international code +44 118
rb@gid.co.uk fax (0118) 989 4254
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?l03130305b895e194ff71>