Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 21 Sep 2014 13:50:55 +0200 (CEST)
From:      Gilles DALMAS <gdalmas@wanadoo.fr>
To:        Ganbold Tsagaankhuu <ganbold@gmail.com>
Cc:        freebsd-arm <freebsd-arm@freebsd.org>
Subject:   Re: kernel debugger on cubietruck
Message-ID:  <1445366845.8901.1411300255792.JavaMail.www@wwinf1p21>
In-Reply-To: <CAGtf9xPxJE-MdUvF-qpfWL8%2B8--44REw_tC6C6zpL-5RTz%2BWQQ@mail.gmail.com>
References:  <568188637.10901.1411218668061.JavaMail.www@wwinf1p20> <CAP=KkTwhRpJRW8jTLCjYRf55RLc-xSi%2BFCEBd5WHpU0hn-bUmQ@mail.gmail.com> <1886035707.11136.1411219513483.JavaMail.www@wwinf1p20> <CAGtf9xNnNavZLsSkTEpku187z7cCA%2BtgmXNODa3UQJZ4Kncqcg@mail.gmail.com> <284420224.12277.1411223197278.JavaMail.www@wwinf1p20> <584735728.12399.1411223474805.JavaMail.www@wwinf1p20> <CAGtf9xNRanWo1F_hY4KHWCWDUNfNn=bcq__qxT-i2YbJCgE%2BWA@mail.gmail.com> <139071258.18161.1411238741408.JavaMail.www@wwinf1p20> <857916216.19088.1411240494803.JavaMail.www@wwinf1p21> <CAGtf9xNwCxsmrdn-2pQg_E8zo=Mqyi%2ByozLJTExrtbQxyXKSZw@mail.gmail.com> <1080334865.5589.1411291564251.JavaMail.www@wwinf1p21> <CAGtf9xPxJE-MdUvF-qpfWL8%2B8--44REw_tC6C6zpL-5RTz%2BWQQ@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
but yes, there it is said, is only available for "linux". the "bcmdhd" modu=
le is also available on "freebsd"?






> Message du 21/09/14 13:07
> De : "Ganbold Tsagaankhuu"=20
> A : "Gilles DALMAS"=20
> Copie =C3=A0 : "freebsd-arm"=20
> Objet : Re: kernel debugger on cubietruck
>=20
>

>

>
On Sun, Sep 21, 2014 at 5:26 PM, Gilles DALMAS  wrote:
>

> the "wifi" supported?



>
As far as I can tell no one is working on GMAC ethernet driver. Since I don=
't have the hardware I'm not sure which wifi it has.
https://linux-sunxi.org/Cubietruck#Wifi says something related to Broadcom.
>

>
Ganbold
=C2=A0

>=20
>=20
>=20
>=20
>=20
>

> Message du 21/09/14 06:25
> > De : "Ganbold Tsagaankhuu"=20
> > A : "Gilles DALMAS"=20
>=20

> Copie =C3=A0 : "freebsd-arm"=20
> > Objet : Re: kernel debugger on cubietruck
> >=20
> >

> >

> >
On Sun, Sep 21, 2014 at 3:14 AM, Gilles DALMAS  wrote:
> >

> > the network interface is not detected
> >=20
> >=20
> >



> >
Cubietruck should have GMAC ethernet, currently it is not supported in Free=
BSD.

> >
Ganbold
=C2=A0

> >=20
> >=20
> >

> Message du 20/09/14 20:45
> > > De : "Gilles DALMAS"=20
> > > A : "Ganbold Tsagaankhuu"=20
> > > Copie =C3=A0 : "freebsd-arm"=20
> > > Objet : Re: kernel debugger on cubietruck
> > >=20
> > > when I try to put "ufs: / dev / da0", the system starts but I have a =
lot of "no such device" and "spurious interrupt detected" > Message du 20/0=
9/14 16:35 > De : "Ganbold Tsagaankhuu" > A : "Gilles DALMAS" > Copie =C3=
=A0 : > Objet : Re: kernel debugger on cubietruck > > > > On Sat, Sep 20, 2=
014 at 10:31 PM, Gilles DALMAS wrote: > > no need to re make the kernel-too=
lchain ? > > No just build kernel only. > Ganbold =C2=A0 > > > > > > Messag=
e du 20/09/14 16:26 > > De : "Gilles DALMAS" > > A : "Ganbold Tsagaankhuu" =
> > Copie =C3=A0 : "freebsd-arm@freebsd.org" > > Objet : Re: kernel debugge=
r on cubietruck > > > > i comment emac line from : # Ethernet device=C2=A0=
=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 loop device=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=
=C2=A0 ether device=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 mii device=C2=A0=
=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 smscphy #device =C2=A0=C2=A0=C2=A0 cpsw dev=
ice=C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 bpf device=C2=A0=C2=A0=C2=A0 =C2=
=A0=C2=A0=C2=A0 emac # USB ethernet support, requires miibus device=C2=A0=
=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 miibus =C2=A0 and re run the compilation ? =
=C2=A0 =C2=A0 no need to re created the sd card ? just the USB flash ? =C2=
=A0 > Message du 20/09/14 16:09 > De : "Ganbold Tsagaankhuu" > A : "Gilles =
DALMAS" > Copie =C3=A0 : "freebsd-arm@freebsd.org" > Objet : Re: kernel deb=
ugger on cubietruck > > > > On Sat, Sep 20, 2014 at 9:25 PM, Gilles DALMAS =
wrote: > I did not know much about debug kernel, but when I pass the trace =
command, I get: > > db> trace > Tracing pid 0 tid 100000 td 0xc08ba870 > db=
_trace_self() at db_trace_self > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0 pc =3D 0xc04eba6c=C2=A0 lr =3D 0xc0232780 (db_hex2dec+0x4d8) > =C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 sp =3D 0xc08e5750=C2=A0 fp =
=3D 0xc08e5768 > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 r10 =3D 0xc08ba=
1c4 > db_hex2dec() at db_hex2dec+0x4d8 > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0 pc =3D 0xc0232780=C2=A0 lr =3D 0xc02320f0 (db_command_loop+=
0x2fc) > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 sp =3D 0xc08e5770=
=C2=A0 fp =3D 0xc08e5810 > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
 r4 =3D 0x00000000=C2=A0 r5 =3D 0x00000000 > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0 r6 =3D 0x00000063 > db_command_loop() at db_command_loop=
+0x2fc > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 pc =3D 0xc02320f0=
=C2=A0 lr =3D 0xc0231e54 (db_command_loop+0x60) > =C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0 sp =3D 0xc08e5818=C2=A0 fp =3D 0xc08e5828 > =C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 r4 =3D 0xc0528609=C2=A0 r5 =3D 0=
xc0540c1c > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 r6 =3D 0xc08ba=
1b0=C2=A0 r7 =3D 0xc08e5a48 > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0 r8 =3D 0x00000001=C2=A0 r9 =3D 0xc05d2918 > =C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0 r10 =3D 0xc0615aa4 > db_command_loop() at db_command_loop+0=
x60 > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 pc =3D 0xc0231e54=C2=
=A0 lr =3D 0xc023481c (X_db_symbol_values+0x250) > =C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0 sp =3D 0xc08e5830=C2=A0 fp =3D 0xc08e5950 > =C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 r4 =3D 0x00000000=C2=A0 r5 =3D 0=
xc08ba1bc > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 r6 =3D 0xc0615=
ac8 > X_db_symbol_values() at X_db_symbol_values+0x250 > =C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 pc =3D 0xc023481c=C2=A0 lr =3D 0xc0352c88 (k=
db_trap+0x15c) > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 sp =3D 0x=
c08e5958=C2=A0 fp =3D 0xc08e5978 > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0 r4 =3D 0x00000000=C2=A0 r5 =3D 0x00000005 > =C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 r6 =3D 0xc0615ac8=C2=A0 r7 =3D 0xc08e5a48 > kdb=
_trap() at kdb_trap+0x15c > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0 pc =3D 0xc0352c88=C2=A0 lr =3D 0xc050138c (data_abort_handler+0x680) > =
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 sp =3D 0xc08e5980=C2=A0 fp=
 =3D 0xc08e5998 > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 r4 =3D 0=
xc08e5a48=C2=A0 r5 =3D 0x00000005 > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0 r6 =3D 0x600001d3=C2=A0 r7 =3D 0x00000000 > =C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 r8 =3D 0x00000013=C2=A0 r9 =3D 0xc08e5a48 > =C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 r10 =3D 0x00000001 > data_abort_han=
dler() at data_abort_handler+0x680 > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0 pc =3D 0xc050138c=C2=A0 lr =3D 0xc0501134 (data_abort_handler+=
0x428) > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 sp =3D 0xc08e59a0=
=C2=A0 fp =3D 0xc08e5a40 > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
 r4 =3D 0xc08e5eb0=C2=A0 r5 =3D 0xc08ba870 > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0 r6 =3D 0xc08ba548=C2=A0 r7 =3D 0x00000005 > data_abort_h=
andler() at data_abort_handler+0x428 > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0 pc =3D 0xc0501134=C2=A0 lr =3D 0xc04ed754 (exception_exit) > =
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 sp =3D 0xc08e5a48=C2=A0 fp=
 =3D 0xc08e5ab0 > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 r4 =3D 0=
xc3b49f00=C2=A0 r5 =3D 0xc3b4a080 > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0 r6 =3D 0xc3b4a0b8=C2=A0 r7 =3D 0x00000000 > =C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 r8 =3D 0xc056b038=C2=A0 r9 =3D 0xc3ae1700 > =C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 r10 =3D 0xc05d4930 > exception_exit=
() at exception_exit > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 pc =
=3D 0xc04ed754=C2=A0 lr =3D 0xc024e0f0 (mii_phy_flowstatus+0x2080) > =C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 sp =3D 0xc08e5a98=C2=A0 fp =3D 0=
xc08e5ab0 > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 r0 =3D 0x00000=
000=C2=A0 r1 =3D 0xc0547c85 > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0 r2 =3D 0x00000072=C2=A0 r3 =3D 0x00000008 > =C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0 r4 =3D 0xc3b49f00=C2=A0 r5 =3D 0xc3b4a080 > =C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 r6 =3D 0xc3b4a0b8=C2=A0 r7 =3D 0x00=
000000 > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 r8 =3D 0xc056b038=
=C2=A0 r9 =3D 0xc3ae1700 > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 r10 =
=3D 0xc05d4930 r12 =3D 0x00000000 > strcmp() at strcmp+0x4 > =C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 pc =3D 0xc03d7604=C2=A0 lr =3D 0xc024e=
0f0 (mii_phy_flowstatus+0x2080) > =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0 sp =3D 0xc08e5a98=C2=A0 fp =3D 0xc08e5ab0 > Unwind failure (no re=
gisters changed) > > Please try without=C2=A0emac=C2=A0driver. MII in Cubie=
truck=C2=A0could be different. > > Ganbold > > =C2=A0 > > > =C2=A0 > > > Me=
ssage du 20/09/14 15:13 > > De : "Boris Astardzhiev" > > A : "Gilles DALMAS=
" > > Copie =C3=A0 : freebsd-arm@freebsd.org > > Objet : Re: kernel debugge=
r on cubietruck > > > > > > Hi, > > > As far as I see strcmp() is passed a =
NULL pointer, try issuing a backtrace to get the exact place of calling. > =
> > Regards > > On Sep 20, 2014 4:11 PM, "Gilles DALMAS"=C2=A0 wrote: > > h=
i, > > > > =C2=A0 > > > > I would compile freebsd for it run on a cubietruc=
k. For this I used the wiki page: https://wiki.freebsd.org/FreeBSD/arm/Cubi=
eboard using option confifuration "CUBIEBOARD2." everything goes well, but =
starting on the "truck", I get this message: > > > > =C2=A0 > > > > vm_faul=
t(0xc08bab80, 0, 1, 0) -> 1 > > Fatal kernel mode data abort: 'Translation =
Fault (S)' > > trapframe: 0xc08e5a48 > > FSR=3D00000005, FAR=3D00000000, sp=
sr=3Da00001d3 > > r0 =3D00000000, r1 =3Dc0547c85, r2 =3D00000072, r3 =3D000=
00008 > > r4 =3Dc3b49f00, r5 =3Dc3b4a080, r6 =3Dc3b4a0b8, r7 =3D00000000 > =
> r8 =3Dc056b038, r9 =3Dc3ae1700, r10=3Dc05d4930, r11=3Dc08e5ab0 > > r12=3D=
00000000, ssp=3Dc08e5a98, slr=3Dc024e0f0, pc =3Dc03d7604 > > > > [ thread p=
id 0 tid 100000 ] > > Stopped at=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 strcmp+0x4:=
=C2=A0=C2=A0=C2=A0=C2=A0 ldrb=C2=A0=C2=A0=C2=A0 r3, [r0] > > > > > > > > wh=
ere is the problem please ? > > > > _______________________________________=
________ > > freebsd-arm@freebsd.org mailing list > > http://lists.freebsd.=
org/mailman/listinfo/freebsd-arm > > To unsubscribe, send any mail to "free=
bsd-arm-unsubscribe@freebsd.org" > > ______________________________________=
_________ > freebsd-arm@freebsd.org mailing list > http://lists.freebsd.org=
/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-a=
rm-unsubscribe@freebsd.org" > _____________________________________________=
__ freebsd-arm@freebsd.org mailing list http://lists.freebsd.org/mailman/li=
stinfo/freebsd-arm To unsubscribe, send any mail to "freebsd-arm-unsubscrib=
e@freebsd.org" > _______________________________________________ freebsd-ar=
m@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebs=
d-arm To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org=
"



> >







>




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1445366845.8901.1411300255792.JavaMail.www>