Date: Thu, 24 Apr 2008 18:43:38 +0200 From: Roland Smith <rsmith@xs4all.nl> To: =?iso-8859-15?Q?S=E9bastien?= Morand <seb.morand@gmail.com> Cc: freebsd-questions@freebsd.org Subject: Re: Hangup on USB mass device Message-ID: <20080424164338.GA51453@slackbox.xs4all.nl> In-Reply-To: <480FBA97.7020709@gmail.com> References: <480D94E5.4060506@gmail.com> <20080422153442.GB36675@slackbox.xs4all.nl> <16d3abd60804220842t5339f965o1d62a15f001a813f@mail.gmail.com> <20080422165235.GA38265@slackbox.xs4all.nl> <480FBA97.7020709@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--2fHTh5uZTiUOsy+g
Content-Type: text/plain; charset=iso-8859-15
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
On Wed, Apr 23, 2008 at 10:39:19PM +0000, S=E9bastien Morand wrote:
>> What kind of USB chip do you have on the motherboard? Try 'dmesg | grep
>> ^usb' and post the output.
>=20
> $ dmesg | grep usb
> usb0: OHCI version 1.0, legacy support
> usb0: SMM does not respond, resetting
> usb0: <OHCI (generic) USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
> usb1: waiting for BIOS to give up control
> usb1: timed out waiting for BIOS
> usb1: EHCI version 1.0
> usb1: companion controller, 4 ports each: usb0
> usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0
> usb1: USB revision 2.0
> uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
>=20
>> It could be a hardware problem, or a bug.
>=20
> Hardware is fine under linux (same machine) or windows on my wife's lapto=
p (no
> pb with the USB devices), so I don't think so.
>=20
>> Does anything appear in the dmesg output when you try to plug in a USB
>> device? look in /var/log/messages, at the correct time.
>> E.g, the following appears when I plug in a USB flash drive;
>=20
> I get this:
> Apr 23 22:17:48 mellba root: Unknown USB device: vendor 0x07b4 product 0x=
0105
> bus uhub0
According to the file /usr/src/sys/dev/usb/usbdevs on my 7-STABLE
system, this is a C-700 camera, which should be recognized.
> Apr 23 22:17:48 mellba kernel: umass2: <OLYMPUS X100,D540Z,C310Z, class 0=
/0, rev
> 2.00/1.00, addr 2> on uhub0
And it does not seem to be recognized properly.
> So My USB device has been seen and then nothing until the first message o=
f the
> next boot
OK, so it goes wrong before the usb subsystem hands the camera off as a
da device.=20
This is uhub0, so it's recognized as a USB 1.0 device. Is it USB 2.0 capable
> Actually it's quite funny because I have a hard disk on my da0 which
> is working fine:
> da0 at umass-sim0 bus 0 target 0 lun 0
> da0: <WD 2500JB External 0108> Fixed Direct Access SCSI-0 device
> da0: 40.000MB/s transfers
> da0: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C)
> GEOM_LABEL: Label for provider da0s1 is msdosfs/My Book.
=46rom the transfer rate I infer that this is a USB 2.0 device. It should
be connected to uhub1.
> User sebastien is a member if wheel, so hot plug should be working (and i=
t=20
> is with my usb key and my usb hard disk ... it's only my mp3 player and m=
y=20
> camera which make my pc hanging up).
Is the mp3 player a usb 1.0 device as well? In that case the trouble is
probably with the ohci driver, since the USB 2.0 devices seem to work well.
> I try do disable both these services and the result is the same.
>=20
>> Seeing which of these lines appear or not makes it easier to track down
>> the bug.
>>=20
>> Try to read the crashdump with the kernel debugger, as described in
>> =A710.2 of the FreeBSD Developers' Handbook. Obtain a so-called
>> backtrace. (using the 'bt' command in the debugger).
>=20
> I can't do that. It required a built kernel, didn't it?
> The handbook said to launch:
> # cd /usr/obj/usr/src/sys/GENERIC
> # kgdb kernel.debug /var/crash/vmcore.0
>=20
> But ... I don't have this directory since I don't compile my kernel, so I=
try to
On 7.x you should have /boot/kernel/kernel.symbols, which is the
debugging kernel (/boot/kernel/kernel is the regular, stripped, kernel).
> compile the generic kernel:
> Here is what I read trying to build the generic kernel:
> =3D=3D=3D [23\04\2008 22:09:14] root@mellba:/usr/src
> # make buildkernel KERNCONF=3DGENERIC
> "Makefile.inc1", line 1034: Malformed conditional (${MK_LIBTHR} !=3D "no"=
&&
> ${MK_LIBKSE} !=3D "no")
There should be a space between "no" and &&.=20
Roland
--=20
R.F.Smith http://www.xs4all.nl/~rsmith/
[plain text _non-HTML_ PGP/GnuPG encrypted/signed email much appreciated]
pgp: 1A2B 477F 9970 BA3C 2914 B7CE 1277 EFB0 C321 A725 (KeyID: C321A725)
--2fHTh5uZTiUOsy+g
Content-Type: application/pgp-signature
Content-Disposition: inline
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.8 (FreeBSD)
iEYEARECAAYFAkgQuLoACgkQEnfvsMMhpyWLnACglQWRs3MdykhSCx/G4cGDXivF
sXMAoK0I5+BzKG2DCJatpP5re8qovnQC
=HZsu
-----END PGP SIGNATURE-----
--2fHTh5uZTiUOsy+g--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080424164338.GA51453>