Date: Sun, 27 Jun 1999 13:34:47 -0700 (PDT) From: Bart Trzynadlowski <trzy@powernet.net> To: freebsd-questions@freebsd.org Subject: dialing with PPP Message-ID: <Pine.BSF.4.05.9906271329490.303-100000@Brzuszek>
next in thread | raw e-mail | index | archive | help
Hi, I have been using user PPP sucessfully for a while but I always have to do everything manually, start up PPP, then I have to use "term" to dial. I wanted to set ppp for dial-on-demand mode but I can't even get user PPP to execute a "dial powernet" command while in PPP. The /etc/ppp/ppp.conf file is set up. When I execute "dial powernet" the program just sits there silently and doesn't even attempt to dial for a second and prints: Warning: Chat script failed It keeps repeating the message. My ppp.log says this: Jun 27 13:21:36 Brzuszek ppp[257]: Phase: Using interface: tun0 Jun 27 13:21:36 Brzuszek ppp[257]: Phase: deflink: Created in closed state Jun 27 13:21:36 Brzuszek ppp[257]: Phase: PPP Started (interactive mode). Jun 27 13:21:41 Brzuszek ppp[257]: Phase: bundle: Establish Jun 27 13:21:41 Brzuszek ppp[257]: Phase: deflink: closed -> opening Jun 27 13:21:41 Brzuszek ppp[257]: Phase: deflink: Connected! Jun 27 13:21:41 Brzuszek ppp[257]: Phase: deflink: opening -> dial Jun 27 13:21:41 Brzuszek ppp[257]: Phase: Phone: 326-5210 Jun 27 13:21:46 Brzuszek ppp[257]: Phase: deflink: dial -> hangup Jun 27 13:21:46 Brzuszek ppp[257]: Phase: deflink: Disconnected! Jun 27 13:21:46 Brzuszek ppp[257]: Phase: deflink: Connect time: 5 secs: 0 octets in, 0 octets out Jun 27 13:21:46 Brzuszek ppp[257]: Phase: total 0 bytes/sec, peak 0 bytes/sec on Sun Jun 27 13:21:46 1999 Jun 27 13:21:46 Brzuszek ppp[257]: Phase: deflink: hangup -> opening Jun 27 13:21:46 Brzuszek ppp[257]: Phase: deflink: Enter pause (3) for redialing. Jun 27 13:21:49 Brzuszek ppp[257]: Phase: deflink: Redial timer expired. Jun 27 13:21:49 Brzuszek ppp[257]: Phase: deflink: Connected! Jun 27 13:21:49 Brzuszek ppp[257]: Phase: deflink: opening -> dial Jun 27 13:21:49 Brzuszek ppp[257]: Phase: Phone: 326-5210 Jun 27 13:21:54 Brzuszek ppp[257]: Phase: deflink: dial -> hangup Jun 27 13:21:54 Brzuszek ppp[257]: Phase: deflink: Disconnected! Jun 27 13:21:54 Brzuszek ppp[257]: Phase: deflink: Connect time: 5 secs: 0 octets in, 0 octets out Jun 27 13:21:54 Brzuszek ppp[257]: Phase: total 0 bytes/sec, peak 0 bytes/sec on Sun Jun 27 13:21:54 1999 Jun 27 13:21:54 Brzuszek ppp[257]: Phase: deflink: hangup -> opening Jun 27 13:21:54 Brzuszek ppp[257]: Phase: deflink: Enter pause (3) for redialing. Jun 27 13:21:57 Brzuszek ppp[257]: Phase: deflink: Redial timer expired. Jun 27 13:21:57 Brzuszek ppp[257]: Phase: deflink: Connected! Jun 27 13:21:57 Brzuszek ppp[257]: Phase: deflink: opening -> dial Jun 27 13:21:57 Brzuszek ppp[257]: Phase: Phone: 326-5210 Jun 27 13:21:59 Brzuszek ppp[257]: Phase: deflink: Disconnected! Jun 27 13:21:59 Brzuszek ppp[257]: Phase: deflink: dial -> hangup Jun 27 13:21:59 Brzuszek ppp[257]: Phase: deflink: Connect time: 2 secs: 0 octets in, 0 octets out Jun 27 13:21:59 Brzuszek ppp[257]: Phase: total 0 bytes/sec, peak 0 bytes/sec on Sun Jun 27 13:21:59 1999 Jun 27 13:21:59 Brzuszek ppp[257]: Phase: deflink: hangup -> closed Jun 27 13:21:59 Brzuszek ppp[257]: Phase: bundle: Dead Jun 27 13:21:59 Brzuszek ppp[257]: Phase: PPP Terminated (normal). My /etc/ppp/ppp.conf file is set up like this: default: allow users * set speed 57600 set device /dev/cuaa2 disable pred1 deny pred1 disable lqr deny lqr set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5\"\" ATE1Q0M0 OK-AT-OK\\dATDT\\T TIMEOUT 45 CONNECT" powernet: set phone 326-5210 set redial 3 5 set login set authname trzy set authkey for_my_eyes_only # ;) set phone 326-5210 set timeout 0 set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 set openmode active enable chap demand: set login set authname trzy set authkey for_my_eyes_only set phone "3265210|3265100" set redial 5.3 2 set reconnect 3 2 set timeout 0 set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 set openmode active accept chap Any help would be appreciated. Thanks, Bart Trzynadlowski To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9906271329490.303-100000>