Date: Wed, 6 May 1998 11:44:52 -0700 (PDT) From: Murray Stokely <murray@cdrom.com> To: luigi@labinfo.iet.unipi.it Cc: questions@FreeBSD.ORG, multimedia@FreeBSD.ORG Subject: ESS1868 and FreeBSD 2.2.6 Message-ID: <Pine.BSF.3.96.980506114046.24026I-100000@pike.cdrom.com>
next in thread | raw e-mail | index | archive | help
What's the best way to get one of those cheap ESS1868 ISA PnP sound
cards to work with FreeBSD v2.2.6? I've setup the following in my
kernel config file -
controller pnp0
device pcm0 at isa? port ? tty irq 10 drq 1 flags 0x0 vector pcmintr
but dmesg reports the following at bootup -
<clip>
Probing for PnP devices:
CSN 1 Vendor ID: ESS1868 [0x68187316] Serial 0xffffffff
This is an ESS1868, but LDN 1 is disabled
Probing for devices on the ISA bus:
...
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: model Generic PS/2 mouse, device ID 0
pcm0 not found at 0xffffffff
pca0 on motherboard
pca0: PC speaker audio driver
</clip>
- Murray
[Complete dmesg output, in case I missed something important:]
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 2.2.6-RELEASE #0: Tue May 5 09:28:41 PDT 1998
murray@disco.cdrom.com:/usr/src/sys/compile/DISCO
CPU: Pentium (167.05-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping=3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67108864 (65536K bytes)
avail memory = 63406080 (61920K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82439TX PCI cache memory controller> rev 1 on pci0:0:0
chip1 <Intel 82371AB PCI-ISA bridge> rev 1 on pci0:7:0
chip2 <Intel 82371AB IDE interface> rev 1 on pci0:7:1
chip3 <Intel 82371AB USB interface> rev 1 int d irq 11 on pci0:7:2
chip4 <Intel 82371AB Power management controller> rev 1 on pci0:7:3
ncr0 <ncr 53c875j fast20 wide scsi> rev 4 int a irq 10 on pci0:8:0
ncr0 waiting for scsi devices to settle
(ncr0:0:0): "SEAGATE ST15150N 0024" type 0 fixed SCSI 2
sd0(ncr0:0:0): Direct-Access
sd0(ncr0:0:0): 10.0 MB/s (100 ns, offset 15)
4095MB (8388315 512 byte sectors)
(ncr0:2:0): "SEAGATE ST43400N 0116" type 0 fixed SCSI 2
sd1(ncr0:2:0): Direct-Access
sd1(ncr0:2:0): 10.0 MB/s (100 ns, offset 15)
2777MB (5688447 512 byte sectors)
(ncr0:6:0): "TOSHIBA CD-ROM XM-3401TA 1094" type 5 removable SCSI 2
cd0(ncr0:6:0): CD-ROM
cd0(ncr0:6:0): 4.0 MB/s (250 ns, offset 15)
can't get the size
fxp0 <Intel EtherExpress Pro 10/100B Ethernet> rev 2 int a irq 9 on pci0:9:0
fxp0: Ethernet address 00:a0:c9:5b:0e:33
vga0 <VGA-compatible display device> rev 0 int a irq 5 on pci0:10:0
Probing for PnP devices:
CSN 1 Vendor ID: ESS1868 [0x68187316] Serial 0xffffffff
This is an ESS1868, but LDN 1 is disabled
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: model Generic PS/2 mouse, device ID 0
pcm0 not found at 0xffffffff
pca0 on motherboard
pca0: PC speaker audio driver
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
npx0 flags 0x1 on motherboard
npx0: INT 16 interface
changing root device to st0s1a
Intel Pentium F00F detected, installing workaround
WARNING: / was not properly dismounted.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.980506114046.24026I-100000>