From owner-freebsd-questions  Sun Dec  3 20:14:13 1995
Return-Path: owner-questions
Received: (from root@localhost)
          by freefall.freebsd.org (8.6.12/8.6.6) id UAA21237
          for questions-outgoing; Sun, 3 Dec 1995 20:14:13 -0800
Received: from smople.thehub.com.au ([203.17.162.10])
          by freefall.freebsd.org (8.6.12/8.6.6) with ESMTP id UAA21224
          for <freebsd-questions@freebsd.org>; Sun, 3 Dec 1995 20:14:08 -0800
Received: (from richard@localhost) by smople.thehub.com.au (8.6.11/8.6.9) id OAA00360; Mon, 4 Dec 1995 14:07:51 GMT
Date: Mon, 4 Dec 1995 14:07:51 +0000 ()
From: Richard J Uren <richard@thehub.com.au>
To: freebsd-questions@freebsd.org
Subject: SCSI disk not identifying properly.
Message-ID: <Pine.BSF.3.91.951204140011.313A-100000@smople.thehub.com.au>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-questions@freebsd.org
Precedence: bulk


Hi,

So I just got a new Conner CFP4207S out of the box & plugged it in to my
adaptec 2940 SCSI card and behold the Conner identifies itself 
as SCSI ID 0,1,2,3,4,5 & 6 on the bus. But the card gets its own ID (7) 
correct.

Other devices are : Seagate SCSI ID 2.

This is before FreeBSD even boots - at the BIOS SCSI id inquiry phase.

Ive had this problem before with another Conner Disk on this card but 
in different cabling & SCSI ID configurations. That disk was a CFP2107S.

Any ideas ?

Thanks

Richard