Date: Wed, 1 Jul 2009 23:02:39 -0700 (PDT) From: Jin Guojun <jguojun@sbcglobal.net> To: freebsd-hardware@freebsd.org, dalibor kollar <dalibor.kollar@gmail.com> Subject: Re: burning speed Message-ID: <852322.72085.qm@web82207.mail.mud.yahoo.com>
next in thread | raw e-mail | index | archive | help
The spec did not say what its PATA speed is. Check your ATA setting: atacontrol list atacontrol mode $ACD0 Substitute $ACD0 as your device name show on probe list. Make sure it is in UDMA2 or better (not WDMA2 or PIO#). If it is in PIO#, try to change it to atacontrol mode $ACD0 UDMA6 atacontrol will find a better fit for you. If your device is in UDMA2 or better, can you send dmesg for your boot up? --- On Wed, 7/1/09, dalibor kollar <dalibor.kollar@gmail.com> wrote: > From: dalibor kollar <dalibor.kollar@gmail.com> > Subject: burning speed > To: freebsd-hardware@freebsd.org > Date: Wednesday, July 1, 2009, 12:28 PM > Hello, > > I have dvd-drive ASUS DRW-1814BL: > http://www.asus.com/product.aspx?P_ID=0S8SJw9jibmKbMn5 > > when burning dvds with k3b, real burning speed is for first > ca. 50% of the > process + - 8x (with manually set to 10x). but then > something goes wrong. > Software buffer is on 100%, but buffer of my dvd burner > jumps between 10% > and 50% and burning speed for the rest of the burning > process is between 1x > and 3x. I'm using verbatim 16x DVD-R for several years, > never experienced > any problems of this kind before. > > I've tried to burn dvds with latest tkdvd from the ports > collection, but it > was the same. tkdvd is not showing current burning speed, > only estimated > time remaining till the end of the process. and this time > is growing all the > time. burning of 1 dvd with k3b and tkdvd as well lasts > 15-20 minutes. > > anyone any idea what might be wrong? > ----------- > > dalibor > _______________________________________________ > freebsd-hardware@freebsd.org > mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-hardware > To unsubscribe, send any mail to "freebsd-hardware-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?852322.72085.qm>