Date: Mon, 15 Mar 2004 17:31:02 -0500 From: Anthony Wood <adwood@earthlink.net> To: freebsd-stable@freebsd.org Subject: Re: HEADSUP!!! USB MFC committed.. Message-ID: <20040315223102.GA35428@lichen.forest.homeunix.net> In-Reply-To: <Pine.BSF.4.21.0402291659180.50107-100000@InterJet.elischer.org> References: <Pine.BSF.4.21.0402291659180.50107-100000@InterJet.elischer.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Feb 29, 2004 at 05:01:28PM -0800, Julian Elischer wrote:
> The USB code in RELENG_4 has been updated to match that in -current.
> Please test any USB devices that are critical to you BEFORE we release
> 4.10 :-)
Julian,
My Nikon Coolpix 4500 continues not to work on my laptop in 4.9--although
it works just fine on my desktop, running the same version of FreeBSD.
The difference is the controller:
usb0: <VIA 83C572 USB controller> on uhci0 [desktop, works]
usb0: <NEC uPD 9210 USB controller> on ohci0 [laptop, doesn't work]
Connecting the device shows:
umass0: NIKON Nikon Digital Camera E4500, rev 1.10/1.00, addr 2
umass0: BBB reset failed, STALLED
umass0: BBB bulk-in clear stall failed, STALLED
umass0: BBB bulk-out clear stall failed, STALLED
Other relevant info:
# uname -a
FreeBSD samara 4.9-STABLE FreeBSD 4.9-STABLE #0: Thu Mar 4 18:31:28 EST 2004 root@samara:/usr/obj/usr/src/sys/SAMARA i386
# usbdevs -v
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), NEC(0x0000), rev 1.00
port 1 addr 2: full speed, self powered, config 1, product 0x010a(0x010a), Nikon(0x04b0), rev 1.00
port 2 powered
# dmesg
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-STABLE #0: Thu Mar 4 18:31:28 EST 2004
root@samara.forest.homeunix.net:/usr/obj/usr/src/sys/SAMARA
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 266615625 Hz
CPU: Pentium/P55C (quarter-micron) (266.62-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x582 Stepping = 2
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 100728832 (98368K bytes)
config> en pcic1
config> po pcic1 0x3e2
config> ir pcic1 0
config> iom pcic1 0xd4000
config> f pcic1 0
config> q
avail memory = 93884416 (91684K bytes)
Preloaded elf kernel "kernel" at 0xc03ef000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03ef09c.
Intel Pentium detected, installing workaround for F00F bug
VESA: v2.0, 1984k memory, flags:0x0, mode table:0xc03735c2 (1000022)
VESA: MagicGraph 128XD 42K SVGA BIOS
md0: Malloc disk
Using $PIR table, 4 entries at 0xc00f8cb0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <NeoMagic MagicGraph 128XD SVGA controller> at 4.0 irq 11
ohci0: <NEC uPD 9210 USB controller> mem 0xffaff000-0xffafffff irq 11 at device 11.0 on pci0
usb0: OHCI version 1.0
usb0: SMM does not respond, resetting
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Toshiba Fast Infra Red controller> port 0xffc0-0xffdf irq 11 at device 17.0 on pci0
isa0: <ISA bus> on motherboard
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <Intel i82365SL-A/B> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pccard1: <PC Card 16-bit bus (classic)> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, unlimited logging
ad0: 4126MB <TOSHIBA MK4309MAT> [8944/15/63] at ata0-master BIOSPIO
pccard: card inserted, slot 0
Mounting root from ufs:/dev/ad0s1a
wi0 at port 0x240-0x27f irq 3 slot 0 on pccard0
wi0: 802.11 address: 00:09:5b:3b:89:06
wi0: using RF:PRISM2.5 MAC:ISL3873
wi0: Intersil Firmware: Primary 1.00.07, Station 1.03.06
umass0: NIKON Nikon Digital Camera E4500, rev 1.10/1.00, addr 2
umass0: BBB reset failed, STALLED
umass0: BBB bulk-in clear stall failed, STALLED
umass0: BBB bulk-out clear stall failed, STALLED
[omitted: previous 3 lines output 10 more times]
(da0:umass-sim0:0:0:0): got CAM status 0x4
(da0:umass-sim0:0:0:0): fatal error, failed to attach to device
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
umass0: at uhub0 port 1 (addr 2) disconnected
umass0: detached
# camcontrol devlist -v
scbus0 on ata0 bus 0:
< > at scbus0 target -1 lun -1 ()
scbus1 on ata1 bus 0:
< > at scbus1 target -1 lun -1 ()
scbus2 on umass-sim0 bus 0:
<NIKON NIKON DSC E4500 1.00> at scbus2 target 0 lun 0 (probe0)
< > at scbus2 target -1 lun -1 ()
scbus-1 on xpt0 bus 0:
< > at scbus-1 target -1 lun -1 (xpt0)
Anthony
--
#include <signature>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040315223102.GA35428>