Date: Sun, 13 Feb 2000 11:55:47 -0800 (PST) From: The Root of all Vile <root@mordred.cs.ucla.edu> To: freebsd-hardware@freebsd.org, freebsd-stable@freebsd.org Subject: Sony SDT-5000 and my configuration Message-ID: <200002131955.LAA00455@mordred.cs.ucla.edu>
next in thread | raw e-mail | index | archive | help
Here's my configuration, FWIW. -scooter --------------------------------------------------------------------- Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.4-STABLE #13: Sat Feb 12 16:01:50 PST 2000 root@mordred.cs.ucla.edu:/usr/src/sys/compile/MORDRED Timecounter "i8254" frequency 1193242 Hz Timecounter "TSC" frequency 233875483 Hz CPU: AMD-K6tm w/ multimedia extensions (233.88-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x562 Stepping = 2 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> AMD Features=0x400<<b10>> real memory = 67108864 (65536K bytes) avail memory = 62746624 (61276K bytes) Preloaded elf kernel "kernel" at 0xc02bd000. Probing for devices on PCI bus 0: chip0: <VIA 82C597 (Apollo VP3) system controller> rev 0x01 on pci0.0.0 chip1: <PCI to PCI bridge (vendor=1106 device=8597)> rev 0x00 on pci0.1.0 chip2: <VIA 82C586 PCI-ISA bridge> rev 0x41 on pci0.7.0 uhci0: <VIA 83C572 USB Host Controller> rev 0x02 int d irq 11 on pci0.7.2 chip3: <VIA 82C586B ACPI interface> rev 0x10 on pci0.7.3 ncr0: <ncr 53c875 fast20 wide scsi> rev 0x03 int a irq 9 on pci0.8.0 pn0: <82c169 PNIC 10/100BaseTX> rev 0x20 int a irq 11 on pci0.9.0 pn0: Ethernet address: 00:a0:cc:56:bc:7a pn0: autoneg complete, link status good (full-duplex, 100Mbps) Probing for devices on PCI bus 1: vga0: <VGA-compatible display device> rev 0x04 int a irq 9 on pci1.5.0 Probing for PnP devices: Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <6 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 irq 12 on isa psm0: model Generic PS/2 mouse, device ID 0 sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 flags 0x10 on isa sio1: type 16550A fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface usb0: <VIA 83C572 USB Host Controller> uhub0 at usb0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered IP packet filtering initialized, divert disabled, rule-based forwarding disabled, logging limited to 100 packets/entry by default Waiting 8 seconds for SCSI devices to settle sa0 at ncr0 bus 0 target 3 lun 0 sa0: <SONY SDT-5000 3.17> Removable Sequential Access SCSI-2 device sa0: 5.000MB/s transfers (5.000MHz, offset 8) da0 at ncr0 bus 0 target 0 lun 0 da0: <QUANTUM VIKING 4.5 NSE 880R> Fixed Direct Access SCSI-2 device da0: 20.000MB/s transfers (20.000MHz, offset 16), Tagged Queueing Enabled da0: 4345MB (8899737 512 byte sectors: 255H 63S/T 553C) cd0 at ncr0 bus 0 target 4 lun 0 cd0: <PIONEER CD-ROM DR-U12X 1.06> Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Logical unit not ready, manual intervention required da1 at ncr0 bus 0 target 6 lun 0 da1: <IOMEGA ZIP 100 J.02> Removable Direct Access SCSI-2 device da1: 3.300MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present pn0: selecting MII, 100Mbps, half duplex pn0: selecting MII, 100Mbps, full duplex (sa0:ncr0:0:3:0): tape is now frozen- use an OFFLINE, REWIND or MTEOM command to clear this state. (sa0:ncr0:0:3:0): tape is now frozen- use an OFFLINE, REWIND or MTEOM command to clear this state. ---------------------------------------------------------------------- machine "i386" ident MORDRED maxusers 32 makeoptions DEBUG="-g" options PQ_HUGECACHE # color for 1024k/16k cache # # This directive defines a number of things: # - The compiled kernel is to be called `kernel' # - The root filesystem might be on partition wd0a # - Crash dumps will be written to wd0b, if possible. Specifying the # dump device here is not recommended. Use dumpon(8). # config kernel root on da0s2a cpu "I586_CPU" # aka Pentium(tm) options "CPU_WT_ALLOC" options "NO_F00F_HACK" options "COMPAT_43" options USER_LDT options SYSVSHM options SYSVSEM options SYSVMSG options "MD5" options "VM86" options DDB options KTRACE options PERFMON options UCONSOLE options USERCONFIG options VISUAL_USERCONFIG # This is good for 100Mb Ethernet, makes timing resolution decent: options HZ=1000 options INET options "TCP_COMPAT_42" #emulate 4.2BSD TCP bugs options IPFIREWALL options IPFIREWALL_VERBOSE options "IPFIREWALL_VERBOSE_LIMIT=100" #limit verbosity options "ICMP_BANDLIM" pseudo-device ether pseudo-device loop pseudo-device bpfilter 4 pseudo-device disc options FFS #Fast filesystem options MFS #Memory File System options NFS #Network File System options NFS_NOSERVER options "CD9660" #ISO 9660 filesystem options MSDOSFS #MS DOS File System options FFS_ROOT #FFS usable as root device options SOFTUPDATES options NSWAPDEV=2 # NFS options: options "NFS_MINATTRTIMO=3" # VREG attrib cache timeout in sec options "NFS_MAXATTRTIMO=60" options "NFS_MINDIRATTRTIMO=30" # VDIR attrib cache timeout in sec options "NFS_MAXDIRATTRTIMO=60" options "NFS_GATHERDELAY=10" # Default write gather delay (msec) options "NFS_UIDHASHSIZ=29" # Tune the size of nfssvc_sock with this options "NFS_WDELAYHASHSIZ=16" # and with this options "NFS_MUIDHASHSIZ=63" # Tune the size of nfsmount with this options "P1003_1B" options "_KPOSIX_PRIORITY_SCHEDULING" options "_KPOSIX_VERSION=199309L" controller scbus0 #base SCSI code device da0 #SCSI direct access devices (aka disks) device sa0 #SCSI tapes device cd0 #SCSI CD-ROMs device pass0 #CAM passthrough driver # The previous devices (ch, da, st, cd) are recognized by config. # config doesn't (and shouldn't) know about these newer ones, # so we have to specify that they are on a SCSI bus with the "at scbus?" # clause. device pt0 at scbus? # SCSI processor type device sctarg0 at scbus? # SCSI target options SCSI_DELAY=8000 pseudo-device pty 16 pseudo-device speaker pseudo-device gzip options "MSGBUF_SIZE=40960" controller isa0 controller pnp0 #options "AUTO_EOI_1" #options "AUTO_EOI_2" #options "NTIMECOUNTER=20" controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts options VGA_ALT_SEQACCESS options VESA pseudo-device splash device sc0 at isa? tty options MAXCONS=6 # number of virtual consoles options SC_HISTORY_SIZE=200 # number of history buffer lines device npx0 at isa? port IO_NPX iosiz 0x0 flags 0x0 irq 13 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 device sio0 at isa? port "IO_COM1" tty flags 0x10 irq 4 device sio1 at isa? port "IO_COM2" tty flags 0x10 irq 3 ## Sound: #device pcm0 at isa? port ? irq 5 drq 3 flags 0x0f #controller snd0 #device sb0 at isa? port 0x220 irq 5 drq 3 #device sbxvi0 at isa? drq 5 #device sbmidi0 at isa? port 0x330 #device opl0 at isa? port 0x388 controller pci0 controller ncr0 device de0 device pn0 controller ppbus0 device lpt0 at ppbus? device ppc0 at isa? disable port? tty irq 7 options CLK_CALIBRATION_LOOP options "CLK_USE_I8254_CALIBRATION" options CLK_USE_TSC_CALIBRATION options CLUSTERDEBUG options NBUF=512 options NMBCLUSTERS=1024 options PANIC_REBOOT_WAIT_TIME=16 options SHOW_BUSYBUFS # List buffers that prevent root unmount controller uhci0 controller usb0 device ugen0 device ukbd0 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200002131955.LAA00455>