From owner-freebsd-mobile Sun Oct 20 8:42:13 2002 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DB53337B401 for ; Sun, 20 Oct 2002 08:42:11 -0700 (PDT) Received: from fiinbeck.math.ntnu.no (fiinbeck.math.ntnu.no [129.241.15.140]) by mx1.FreeBSD.org (Postfix) with SMTP id 5AAD243E9E for ; Sun, 20 Oct 2002 08:42:10 -0700 (PDT) (envelope-from hanche@math.ntnu.no) Received: (qmail 28854 invoked from network); 20 Oct 2002 15:42:08 -0000 Received: from localhost (127.0.0.1) by localhost with SMTP; 20 Oct 2002 15:42:08 -0000 To: freebsd-mobile@FreeBSD.ORG Subject: Re: 100 Mbit/s is (a lot) slower than 10 Mbit/s In-Reply-To: References: <20021019210804P.hanche@math.ntnu.no> X-Mailer: Mew version 1.94.2 on Emacs 21.2 / Mule 5.0 (SAKAKI) X-URL: http://www.math.ntnu.no/~hanche/ Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 8bit Message-Id: <20021020174208O.hanche@math.ntnu.no> Date: Sun, 20 Oct 2002 17:42:08 +0200 From: Harald Hanche-Olsen X-Dispatcher: imput version 20000228(IM140) Lines: 27 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org + Warren Block : | As others have mentioned, it sounds like a duplex problem. I experimented on my home network (just my stationary machine and the laptop connected back-to-back via a twisted cable). They were both running half duplex, with the problems I described. When I switched them both to full duplex, the speed went from slow to glacial. Playing with tcpdump shows massive packet loss, where activity happens in burst with up to 5 second pauses in between. Each time the sender receives another ack, it will happily fill up the window with new packets, oblivious to the fact that the receiver has lost more packets further back... | If you still want to experiment with speed: | | 'ifconfig ed0 media 10baseT/UTP' (assuming UTP wiring rather than coax). Thanks. The ed(4) man page does not mention this (the dc(4) one does), and I could have sworn I had tried it anyway and found it not to work. But that was several FreeBSD releases ago, so maybe things have changed, or maybe I just had finger trouble back then. This will probably be my solution at the office. I don't really need 100 Mbit/s access for most of the stuff I do with the laptop anyway. And if I do, I'll go buy a better card. Thanks to all who responded. - Harald To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Oct 20 8:46:58 2002 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 44FEE37B401 for ; Sun, 20 Oct 2002 08:46:57 -0700 (PDT) Received: from watery.cc.kogakuin.ac.jp (watery.cc.kogakuin.ac.jp [133.80.152.80]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0977643E8A for ; Sun, 20 Oct 2002 08:46:56 -0700 (PDT) (envelope-from nyan@jp.FreeBSD.org) Received: from localhost (localhost [IPv6:::1]) by watery.cc.kogakuin.ac.jp (8.12.6/8.12.6) with ESMTP id g9KFkjnq087337; Mon, 21 Oct 2002 00:46:46 +0900 (JST) (envelope-from nyan@jp.FreeBSD.org) Date: Mon, 21 Oct 2002 00:46:10 +0900 (JST) Message-Id: <20021021.004610.74670496.nyan@jp.FreeBSD.org> To: matusita@jp.FreeBSD.org Cc: mobile@FreeBSD.org Subject: Re: pccard[dc] still needed? From: Takahashi Yoshihiro In-Reply-To: <20021019135304P.matusita@jp.FreeBSD.org> References: <20021019135304P.matusita@jp.FreeBSD.org> X-Mailer: Mew version 2.2 on Emacs 21.2 / Mule 5.0 =?iso-2022-jp?B?KBskQjgtTFobKEIp?= Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org In article <20021019135304P.matusita@jp.FreeBSD.org> Makoto Matsushita writes: > In 5-current, NEWCARD is the default pccard subsystem IIRC. Since > floppies are too small to put binaries, we may delete OLDCARD related > things, pccardc and pccardd. And, we can remove /etc/defaults/pccard.conf from the mfsroot floppies for i386. --- TAKAHASHI Yoshihiro To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Oct 20 9:28:12 2002 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D4A6337B401 for ; Sun, 20 Oct 2002 09:28:11 -0700 (PDT) Received: from castle.jp.FreeBSD.org (castle.jp.FreeBSD.org [210.226.20.15]) by mx1.FreeBSD.org (Postfix) with ESMTP id EC5E543E88 for ; Sun, 20 Oct 2002 09:28:10 -0700 (PDT) (envelope-from matusita@jp.FreeBSD.org) Received: from localhost (localhost [::1]) by castle.jp.FreeBSD.org (8.11.6+3.4W/8.11.3) with ESMTP/inet6 id g9KGS8369928; Mon, 21 Oct 2002 01:28:08 +0900 (JST) (envelope-from matusita@jp.FreeBSD.org) Cc: mobile@FreeBSD.org In-Reply-To: <20021021.004610.74670496.nyan@jp.FreeBSD.org> References: <20021019135304P.matusita@jp.FreeBSD.org> <20021021.004610.74670496.nyan@jp.FreeBSD.org> X-User-Agent: Mew/1.94.2 XEmacs/21.5 (bamboo) X-FaceAnim: (-O_O-)(O_O- )(_O- )(O- )(- -)( -O)( -O_)( -O_O)(-O_O-) Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Dispatcher: imput version 20000228(IM140) Lines: 8 From: Makoto Matsushita To: nyan@jp.FreeBSD.org Subject: Re: pccard[dc] still needed? Date: Mon, 21 Oct 2002 01:28:04 +0900 Message-Id: <20021021012804G.matusita@jp.FreeBSD.org> Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org nyan> And, we can remove /etc/defaults/pccard.conf from the mfsroot nyan> floppies for i386. Absolutely. Just commited, thanks! -- - Makoto `MAR' Matsushita To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Oct 20 12:26:31 2002 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id F29C737B401 for ; Sun, 20 Oct 2002 12:26:30 -0700 (PDT) Received: from rip.psg.com (rip.psg.com [147.28.0.39]) by mx1.FreeBSD.org (Postfix) with ESMTP id B5A9843E91 for ; Sun, 20 Oct 2002 12:26:30 -0700 (PDT) (envelope-from randy@psg.com) Received: from localhost ([127.0.0.1] helo=rip.psg.com.psg.com) by rip.psg.com with esmtp (Exim 4.10) id 183LiT-000LYK-00 for freebsd-mobile@freebsd.org; Sun, 20 Oct 2002 12:26:25 -0700 From: Randy Bush MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: FreeBSD Laptoppers Subject: hard drive Message-Id: Date: Sun, 20 Oct 2002 12:26:25 -0700 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org for me, the bottleneck on laptops is the disk throughput. the hard drives themselves are slow, and the bandwidth to them sucks. for big makes etc., a 10GHz cpu would not improve throughput as much as doubling the disk goodput. is anybody making laptoys with real disk i/o subsystems? randy To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Oct 20 20:14:21 2002 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id BCBA837B401 for ; Sun, 20 Oct 2002 20:14:19 -0700 (PDT) Received: from tantra.dynsolve.net (tantra.dynsolve.net [216.37.76.27]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3F56A43E42 for ; Sun, 20 Oct 2002 20:14:19 -0700 (PDT) (envelope-from dave@pixelhammer.com) Received: by tantra.dynsolve.net (Postfix, from userid 1044) id 21C269325; Sun, 20 Oct 2002 22:13:09 -0500 (CDT) Date: Sun, 20 Oct 2002 22:13:08 -0500 From: "dave pixelhammer.com pop3 ftp" To: freebsd-mobile@freebsd.org Subject: Re: Upgrade from 4.1 to 4.5 - ppp problems Message-ID: <20021020221308.A22752@tantra.dynsolve.net> References: <20021017231020.A58328@tantra.dynsolve.net> <20021019013718.A41983@titus.hanley.stade.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <20021019013718.A41983@titus.hanley.stade.co.uk>; from aw1@stade.co.uk on Sat, Oct 19, 2002 at 01:37:18AM +0100 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org On Sat, Oct 19, 2002 at 01:37:18AM +0100, Adrian Wontroba wrote: > On Thu, Oct 17, 2002 at 11:10:20PM -0500, dave pixelhammer.com pop3 ftp wrote: > > > After reformatting and installing 4.5 I cannot get ppp to work. > > Strangly enough I am getting errors of a bad file descriptor for > > /dev/cuaa4. Everything else seems to be working fine, even my > > old compex LAN card works now. > > > > Oddly enough I diffed my old kernel config against my new one > > and found no problems. I did make a /dev/cuaa4. I've looked > > through the freebsd archives and done several google searches > > with no useable results. I checked the Manual and the pedantic > > ppp primer as well. > > Random thoughts: > > You might be better off diffing your 4.1 kernel config against the 4.1 > generic config, working out what you changed, then making equivalent > (not necessarily identical!) changes based on the 4.5 generic config to > produce your own. Yes I did, no difference that was remarkable, or pertained to serial devices, ppp, or pccard. > > What happens if you use the 4.5 generic kernel? Same result > > Why stop at the almost a year old 4.5? 4.7 is out (as downloadable ISO > images at least) and is looking good. Alternatively, I assume that > 4.6.2 CDs are available now. Well... The Toshiba uses the Topic chipset which has had some trouble in the past. I also have a habit of waiting to avoid any "new" problems. I try to stay with a slightly older version of any OS making upgrades where security calls for it. I had planned though to use this laptop to follow "stable", so if I could get it logged on I'll upgrade at that time. > > Is your modem actually on cuaa4? The fifth serial port? What does > "grep sio /var/run/dmesg.boot" say? Yes, dmesg shows the pcmcia card is inserted and correctly identified on sio4. curiously, I rebooted today and did not have the device error! But I do have a problem now with a chat script failure when logging in to my ISP, which is incidently enough, me. This brings the entire story around to the begining which I will tell in a new thread. For now the problem seems to have disapeared, reason unknown. Four cold starts later cuaa4 is working. DAve To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun Oct 20 23:49:59 2002 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1FA5037B401 for ; Sun, 20 Oct 2002 23:49:58 -0700 (PDT) Received: from birch.ripe.net (birch.ripe.net [193.0.1.96]) by mx1.FreeBSD.org (Postfix) with ESMTP id 47EF643E3B for ; Sun, 20 Oct 2002 23:49:57 -0700 (PDT) (envelope-from marks@ripe.net) Received: from laptop.6bone.nl (cow.ripe.net [193.0.1.239]) by birch.ripe.net (8.12.5/8.11.6) with SMTP id g9L6ntnZ017713; Mon, 21 Oct 2002 08:49:55 +0200 Received: (nullmailer pid 611 invoked by uid 1000); Mon, 21 Oct 2002 05:28:19 -0000 Date: Mon, 21 Oct 2002 07:28:19 +0200 From: Mark Santcroos To: Randy Bush Cc: FreeBSD Laptoppers Subject: Re: hard drive Message-ID: <20021021052818.GA554@laptop.6bone.nl> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.4i X-Handles: MS6-6BONE, MS18417-RIPE X-RIPE-Spam-Status: NONE ; -1027 X-RIPE-Spam-Level: Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org On Sun, Oct 20, 2002 at 12:26:25PM -0700, Randy Bush wrote: > for me, the bottleneck on laptops is the disk throughput. the hard > drives themselves are slow, and the bandwidth to them sucks. for > big makes etc., a 10GHz cpu would not improve throughput as much as > doubling the disk goodput. > > is anybody making laptoys with real disk i/o subsystems? Imho the gap between desktop and laptop is getting smaller. There are quite some laptops shipping with UDMA100 now. "dd if=/dev/ad0 of=/dev/null bs=4096" gives me 22 MB/s. I don't have a recent desktop so I don't know how this compares to recent desktop performance but I don't think it is bad. This combined with a 1800Mhz PIV and 256MB DDR memory makes it do buildworlds in 45 minutes. Mark -- Mark Santcroos RIPE Network Coordination Centre http://www.ripe.net/home/mark/ New Projects Group/TTM To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Oct 21 0:34:21 2002 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C346037B401 for ; Mon, 21 Oct 2002 00:34:20 -0700 (PDT) Received: from harmony.village.org (rover.bsdimp.com [204.144.255.66]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9128843E65 for ; Mon, 21 Oct 2002 00:34:16 -0700 (PDT) (envelope-from imp@bsdimp.com) Received: from localhost (warner@rover2.village.org [10.0.0.1]) by harmony.village.org (8.12.3/8.12.3) with ESMTP id g9L7Y6pk079724; Mon, 21 Oct 2002 01:34:06 -0600 (MDT) (envelope-from imp@bsdimp.com) Date: Mon, 21 Oct 2002 01:33:44 -0600 (MDT) Message-Id: <20021021.013344.58997148.imp@bsdimp.com> To: dave@pixelhammer.com Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: Upgrade from 4.1 to 4.5 - ppp problems From: "M. Warner Losh" In-Reply-To: <20021020221308.A22752@tantra.dynsolve.net> References: <20021017231020.A58328@tantra.dynsolve.net> <20021019013718.A41983@titus.hanley.stade.co.uk> <20021020221308.A22752@tantra.dynsolve.net> X-Mailer: Mew version 2.1 on Emacs 21.2 / Mule 5.0 (SAKAKI) Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org In message: <20021020221308.A22752@tantra.dynsolve.net> "dave pixelhammer.com pop3 ftp" writes: : Well... The Toshiba uses the Topic chipset which has had some : trouble in the past. I also have a habit of waiting to avoid any : "new" problems. I try to stay with a slightly older version of any : OS making upgrades where security calls for it. 4.7 specifically fixed bugs with ToPIC that 4.5 is known to have. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Oct 21 1:27:19 2002 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2E0B837B401 for ; Mon, 21 Oct 2002 01:27:18 -0700 (PDT) Received: from fiinbeck.math.ntnu.no (fiinbeck.math.ntnu.no [129.241.15.140]) by mx1.FreeBSD.org (Postfix) with SMTP id D1FD543E6A for ; Mon, 21 Oct 2002 01:27:12 -0700 (PDT) (envelope-from hanche@math.ntnu.no) Received: (qmail 51751 invoked from network); 21 Oct 2002 08:27:11 -0000 Received: from localhost (127.0.0.1) by localhost with SMTP; 21 Oct 2002 08:27:11 -0000 To: freebsd-mobile@FreeBSD.ORG Subject: Re: 100 Mbit/s is (a lot) slower than 10 Mbit/s In-Reply-To: <20021020174208O.hanche@math.ntnu.no> References: <20021019210804P.hanche@math.ntnu.no> <20021020174208O.hanche@math.ntnu.no> X-Mailer: Mew version 1.94.2 on Emacs 21.2 / Mule 5.0 (SAKAKI) X-URL: http://www.math.ntnu.no/~hanche/ Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 8bit Message-Id: <20021021102711B.hanche@math.ntnu.no> Date: Mon, 21 Oct 2002 10:27:11 +0200 From: Harald Hanche-Olsen X-Dispatcher: imput version 20000228(IM140) Lines: 13 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org + Harald Hanche-Olsen : | + Warren Block : | | If you still want to experiment with speed: | | | | 'ifconfig ed0 media 10baseT/UTP' (assuming UTP wiring rather than coax). | | [...] This will probably be my solution at the office. Just for the benefit of anybody browsing the mail archive in the future, this works just fine. The case is closed, sort of. - Harald To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Oct 21 3:40:14 2002 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0216837B407 for ; Mon, 21 Oct 2002 03:40:13 -0700 (PDT) Received: from manann.kel.de.core.tng.de (manann.kel.de.core.tng.de [213.178.66.15]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0AF0D43E6A for ; Mon, 21 Oct 2002 03:40:12 -0700 (PDT) (envelope-from webpartner@travel24.com) Received: from TECHNIK_TEST_WS (162.xsnet.de [213.178.77.162]) by manann.kel.de.core.tng.de (Postfix) with SMTP id C1FE91890E for ; Mon, 21 Oct 2002 12:39:07 +0200 (CEST) From: "Webpartner Travel24.com" To: freebsd-mobile@freebsd.org Subject: Ihre Website bringt jetzt Bares! Message-Id: <20021021103907.C1FE91890E@manann.kel.de.core.tng.de> Date: Mon, 21 Oct 2002 12:39:07 +0200 (CEST) Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org Schlaue Website-Betreiber aufgepasst: Geld verdienen leicht gemacht.. auf Ihrer Homepage.. Ohne Aufwand .. Ohne Kosten fuer Sie! Urlaubstraeume auf Ihrer Website bringen Geld auf Ihr Konto! Wie das funktioniert? Mit dem neuen Partnerprogramm der Travel24.com AG. Bieten Sie Ihren Usern attraktiven Mehrwert zum Thema Reisen - und verdienen Sie an den Online-Buchungen Ihrer User. Und so leicht geht das: Wir senden Ihnen einen Link zu Travel24.com, den Sie prominent auf Ihrer Homepage platzieren und schon winken die dicken Provisionen. Auf was warten Sie noch? Einfach hier klicken und los geht's mit dem Geldverdienen: http://www.travel24.com/buffer.jsp?t=0&l=117 Werden Sie Partner einer starken Urlaubsmarke - wir freuen uns auf Sie! Ihr Travel24.com AG-Team P.S. Jede Umsatz- bzw. Ertragssteigerung ist auch wertsteigernd! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Oct 21 7: 6:45 2002 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DFF5337B401 for ; Mon, 21 Oct 2002 07:06:44 -0700 (PDT) Received: from tantra.dynsolve.net (tantra.dynsolve.net [216.37.76.27]) by mx1.FreeBSD.org (Postfix) with ESMTP id 43A1143E6A for ; Mon, 21 Oct 2002 07:06:43 -0700 (PDT) (envelope-from dave@pixelhammer.com) Received: by tantra.dynsolve.net (Postfix, from userid 1044) id 75F879349; Mon, 21 Oct 2002 09:05:34 -0500 (CDT) Date: Mon, 21 Oct 2002 09:05:34 -0500 From: "dave pixelhammer.com pop3 ftp" To: "M. Warner Losh" Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: Upgrade from 4.1 to 4.5 - ppp problems Message-ID: <20021021090534.A28396@tantra.dynsolve.net> References: <20021017231020.A58328@tantra.dynsolve.net> <20021019013718.A41983@titus.hanley.stade.co.uk> <20021020221308.A22752@tantra.dynsolve.net> <20021021.013344.58997148.imp@bsdimp.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <20021021.013344.58997148.imp@bsdimp.com>; from imp@bsdimp.com on Mon, Oct 21, 2002 at 01:33:44AM -0600 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org On Mon, Oct 21, 2002 at 01:33:44AM -0600, M. Warner Losh wrote: > In message: <20021020221308.A22752@tantra.dynsolve.net> > "dave pixelhammer.com pop3 ftp" writes: > : Well... The Toshiba uses the Topic chipset which has had some > : trouble in the past. I also have a habit of waiting to avoid any > : "new" problems. I try to stay with a slightly older version of any > : OS making upgrades where security calls for it. > > 4.7 specifically fixed bugs with ToPIC that 4.5 is known to have. > Then I may just give up and order a 4.7 CD, this morning I came down to my laptop and cuaa4 is not working yet again. DAve To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Oct 21 7:45:25 2002 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5D7DE37B401 for ; Mon, 21 Oct 2002 07:45:22 -0700 (PDT) Received: from tantra.dynsolve.net (tantra.dynsolve.net [216.37.76.27]) by mx1.FreeBSD.org (Postfix) with ESMTP id DBEF443E77 for ; Mon, 21 Oct 2002 07:45:21 -0700 (PDT) (envelope-from dave@pixelhammer.com) Received: by tantra.dynsolve.net (Postfix, from userid 1044) id 4390D9324; Mon, 21 Oct 2002 09:44:23 -0500 (CDT) Date: Mon, 21 Oct 2002 09:44:23 -0500 From: "dave pixelhammer.com pop3 ftp" To: freebsd-mobile@freebsd.org Subject: PPP login problems with pcmcia card. Message-ID: <20021021094423.A28900@tantra.dynsolve.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org Good morning, My problem is that this ppp setup worked fine for over a year. We moved our dialup POP from one physical location to another and now I am having problems logging in. The move did NOT involve any engineering changes. The POP consists of a Lucent Portmaster 3 and a Cisco 3600. The Portmaster is running V90 capable cards and we have two primes installed at that location. Authentication is via Radius. Since the POP relocation I have having excessive problems logging into my network, sometimes I can not log in for hours. Sometimes I get right in though the negotiated speed is very slow. If I can get logged in, I can connect to the Portmaster and see that I am connected from 14400 to 33600. I used connect at 48000 or better every time. All other settings are the same. I can if needed, supply the information I see in the portmaster. I can also send any ppp information requested. I know less of setting up ppp than I thought as I can't seem to get this problem resolved. I believe, slap me if I am wrong, that I am having problems negotiating a connection. The Windows modem log is from my laptop which connects fine. The ppp.log and ppp.conf is from the same laptop. From my reading of the windows modem.log I believe I am doing everything correct in my ppp.conf. ppp is started with "ppp -auto tls" from rc.conf. PPP and bpf are compiled into the kernel. FreeBSD 4.5. Note, this problem is what prompted me to upgrade from FreeBSD 4.1. The connection issue began with FreebSD 4.1 and has persisted with 4.5. What can I try, do, not do, to make this a stable connection. Thanks, DAve ****Windows modem log 10-15-2002 23:03:10.88 - Standard PCMCIA Card Modem in use. 10-15-2002 23:03:10.90 - Modem type: Standard PCMCIA Card Modem 10-15-2002 23:03:10.90 - Modem inf path: MDMGEN.INF 10-15-2002 23:03:10.90 - Modem inf section: PNPC200 10-15-2002 23:03:13.95 - 115200,N,8,1 10-15-2002 23:03:13.96 - 115200,N,8,1 10-15-2002 23:03:13.96 - Initializing modem. 10-15-2002 23:03:13.96 - Send: AT 10-15-2002 23:03:13.96 - Recv: AT 10-15-2002 23:03:14.08 - Recv: OK 10-15-2002 23:03:14.08 - Interpreted response: Ok 10-15-2002 23:03:14.08 - Send: ATE0V1 10-15-2002 23:03:14.09 - Recv: ATE0V1 10-15-2002 23:03:14.21 - Recv: OK 10-15-2002 23:03:14.21 - Interpreted response: Ok 10-15-2002 23:03:14.21 - Send: AT 10-15-2002 23:03:14.34 - Recv: OK 10-15-2002 23:03:14.34 - Interpreted response: Ok 10-15-2002 23:03:14.37 - Dialing. 10-15-2002 23:03:14.37 - Send: ATDT####### 10-15-2002 23:03:35.94 - Recv: 10-15-2002 23:03:35.94 - Interpreted response: Informative 10-15-2002 23:03:35.94 - Recv: 10-15-2002 23:03:35.94 - Interpreted response: Informative 10-15-2002 23:03:35.94 - Recv: CONNECT 10-15-2002 23:03:35.94 - Interpreted response: Connect 10-15-2002 23:03:35.94 - Connection established at 115200bps. 10-15-2002 23:03:35.94 - Error-control off or unknown. 10-15-2002 23:03:35.94 - Data compression off or unknown. 10-15-2002 23:40:29.85 - Hanging up the modem. 10-15-2002 23:40:29.87 - Hardware hangup by lowering DTR. 10-15-2002 23:40:30.13 - Recv: NO CARRIER 10-15-2002 23:40:30.13 - Interpreted response: No Carrier 10-15-2002 23:40:30.13 - Send: ATH 10-15-2002 23:40:30.26 - Recv: OK 10-15-2002 23:40:30.26 - Interpreted response: Ok 10-15-2002 23:40:30.27 - 115200,N,8,1 10-15-2002 23:40:30.44 - Session Statistics: 10-15-2002 23:40:30.44 - Reads : 1414751 bytes 10-15-2002 23:40:30.44 - Writes: 109489 bytes 10-15-2002 23:40:30.44 - Standard PCMCIA Card Modem closed. 10-17-2002 00:35:59.67 - Standard PCMCIA Card Modem in use. ################################################################# # PPP Sample Configuration File # Originally written by Toshiharu OHNO # Simplified 5/14/1999 by wself@cdrom.com # # $FreeBSD: src/etc/ppp/ppp.conf,v 1.2 1999/08/27 23:24:08 peter Exp $ ################################################################# default: set server +3000 root allow users set device /dev/cuaa4 set log Phase Chat LCP IPCP CCP tun command set speed 115200 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 10 \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT" set timeout 300 set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 add default HISADDR enable dns disable lqr deny lqr set openmode active set redial 3 2 tls: set login "TIMEOUT 10 \"\" \"\" gin:--gin: \\U word: \\P" set authname XXXXXX set authkey XXXXXX set phone 616-0000 # Freebsd ppp.log Oct 17 23:00:00 redbird newsyslog[176]: logfile turned over Oct 20 21:34:44 redbird ppp[56]: tun0: Phase: bundle: Establish Oct 20 21:34:44 redbird ppp[56]: tun0: Phase: deflink: closed -> opening Oct 20 21:34:44 redbird ppp[56]: tun0: Phase: deflink: Connected! Oct 20 21:34:44 redbird ppp[56]: tun0: Phase: deflink: opening -> dial Oct 20 21:34:44 redbird ppp[56]: tun0: Chat: Phone: 616-0000 Oct 20 21:34:44 redbird ppp[56]: tun0: Chat: deflink: Dial attempt 1 of 2 Oct 20 21:34:44 redbird ppp[56]: tun0: Chat: Send: AT^M Oct 20 21:34:44 redbird ppp[56]: tun0: Chat: Expect(10): OK Oct 20 21:34:55 redbird ppp[56]: tun0: Chat: Expect timeout Oct 20 21:34:55 redbird ppp[56]: tun0: Chat: Send: AT^M Oct 20 21:34:55 redbird ppp[56]: tun0: Chat: Expect(10): OK Oct 20 21:35:05 redbird ppp[56]: tun0: Chat: Expect timeout Oct 20 21:35:05 redbird ppp[56]: tun0: Warning: Chat script failed Oct 20 21:35:05 redbird ppp[56]: tun0: Phase: deflink: dial -> hangup Oct 20 21:35:05 redbird ppp[56]: tun0: Phase: deflink: Disconnected! Oct 20 21:35:05 redbird ppp[56]: tun0: Phase: deflink: Connect time: 21 secs: 0 octets in, 0 octets out Oct 20 21:35:05 redbird ppp[56]: tun0: Phase: deflink: : 0 packets in, 0 packets out Oct 20 21:35:05 redbird ppp[56]: tun0: Phase: total 0 bytes/sec, peak 0 bytes/sec on Sun Oct 20 21:35:05 2002 Oct 20 21:35:05 redbird ppp[56]: tun0: Phase: deflink: hangup -> opening Oct 20 21:35:05 redbird ppp[56]: tun0: Phase: deflink: Enter pause (3) for redialing. Oct 20 21:35:08 redbird ppp[56]: tun0: Chat: deflink: Redial timer expired. Oct 20 21:35:08 redbird ppp[56]: tun0: Phase: deflink: Connected! Oct 20 21:35:08 redbird ppp[56]: tun0: Phase: deflink: opening -> dial Oct 20 21:35:08 redbird ppp[56]: tun0: Chat: Phone: 616-0000 Oct 20 21:35:08 redbird ppp[56]: tun0: Chat: deflink: Dial attempt 2 of 2 Oct 20 21:35:08 redbird ppp[56]: tun0: Chat: Send: AT^M Oct 20 21:35:08 redbird ppp[56]: tun0: Chat: Expect(10): OK Oct 20 21:35:19 redbird ppp[56]: tun0: Chat: Expect timeout Oct 20 21:35:19 redbird ppp[56]: tun0: Chat: Send: AT^M Oct 20 21:35:19 redbird ppp[56]: tun0: Chat: Expect(10): OK Oct 20 21:35:29 redbird ppp[56]: tun0: Chat: Expect timeout Oct 20 21:35:29 redbird ppp[56]: tun0: Warning: Chat script failed Oct 20 21:35:29 redbird ppp[56]: tun0: Phase: deflink: dial -> hangup Oct 20 21:35:29 redbird ppp[56]: tun0: Phase: deflink: Disconnected! Oct 20 21:35:29 redbird ppp[56]: tun0: Phase: deflink: Connect time: 21 secs: 0 octets in, 0 octets out Oct 20 21:35:29 redbird ppp[56]: tun0: Phase: deflink: : 0 packets in, 0 packets out Oct 20 21:35:29 redbird ppp[56]: tun0: Phase: total 0 bytes/sec, peak 0 bytes/sec on Sun Oct 20 21:35:29 2002 Oct 20 21:35:29 redbird ppp[56]: tun0: Phase: deflink: hangup -> closed Oct 20 21:35:29 redbird ppp[56]: tun0: Phase: bundle: Dead Oct 20 21:36:34 redbird ppp[56]: tun0: Phase: Signal 15, terminate. Oct 20 21:36:34 redbird ppp[56]: tun0: Phase: PPP Terminated (normal). To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Oct 21 7:54:36 2002 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1909537B401 for ; Mon, 21 Oct 2002 07:54:35 -0700 (PDT) Received: from postal2.es.net (postal2.es.net [198.128.3.206]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6B83143E75 for ; Mon, 21 Oct 2002 07:54:34 -0700 (PDT) (envelope-from oberman@es.net) Received: from ptavv.es.net ([198.128.4.29]) by postal2.es.net (Postal Node 2) with ESMTP id MUA74016; Mon, 21 Oct 2002 07:54:33 -0700 Received: from ptavv (localhost [127.0.0.1]) by ptavv.es.net (Postfix) with ESMTP id CD5DD5D06; Mon, 21 Oct 2002 07:54:32 -0700 (PDT) To: Mark Santcroos Cc: Randy Bush , FreeBSD Laptoppers Subject: Re: hard drive In-reply-to: Your message of "Mon, 21 Oct 2002 07:28:19 +0200." <20021021052818.GA554@laptop.6bone.nl> Date: Mon, 21 Oct 2002 07:54:32 -0700 From: "Kevin Oberman" Message-Id: <20021021145432.CD5DD5D06@ptavv.es.net> Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org > Date: Mon, 21 Oct 2002 07:28:19 +0200 > From: Mark Santcroos > Sender: owner-freebsd-mobile@FreeBSD.ORG > > On Sun, Oct 20, 2002 at 12:26:25PM -0700, Randy Bush wrote: > > for me, the bottleneck on laptops is the disk throughput. the hard > > drives themselves are slow, and the bandwidth to them sucks. for > > big makes etc., a 10GHz cpu would not improve throughput as much as > > doubling the disk goodput. > > > > is anybody making laptoys with real disk i/o subsystems? > > Imho the gap between desktop and laptop is getting smaller. There are > quite some laptops shipping with UDMA100 now. > > "dd if=/dev/ad0 of=/dev/null bs=4096" gives me 22 MB/s. I don't have a > recent desktop so I don't know how this compares to recent desktop > performance but I don't think it is bad. > > This combined with a 1800Mhz PIV and 256MB DDR memory makes it do > buildworlds in 45 minutes. My IBM T30 has a 1800 MHZ P4 and UDMA100. I have 512 Mb DDR RAM and buildworld takes 33 minutes for Stable. It also has a higher resolution display than my desktop LCD panels. I'd say the gap may be narrowing, but a 4 processor Xeon with SCSI drives will still blow my laptop away. But it is much faster than my normal desktop, a 1000 MHZ PIII with 512 Mb RAM and UDMA133 disk controller. The laptop cost more than the desktop, as well. R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Oct 21 13:17:15 2002 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 31D0137B401 for ; Mon, 21 Oct 2002 13:17:14 -0700 (PDT) Received: from postal2.es.net (postal2.es.net [198.128.3.206]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3818243E42 for ; Mon, 21 Oct 2002 13:17:13 -0700 (PDT) (envelope-from oberman@es.net) Received: from ptavv.es.net ([198.128.4.29]) by postal2.es.net (Postal Node 2) with ESMTP id MUA74016; Mon, 21 Oct 2002 13:17:12 -0700 Received: from ptavv (localhost [127.0.0.1]) by ptavv.es.net (Postfix) with ESMTP id EB2B75D03; Mon, 21 Oct 2002 13:17:11 -0700 (PDT) To: freebsd_mail@myrealbox.com Cc: dwalton@acm.org, mobile@freebsd.org Subject: Re: problems with upgrade In-reply-to: Your message of "Sat, 19 Oct 2002 22:16:31 PDT." <200210192216310092.503BB7CC@smtp.myrealbox.com> Date: Mon, 21 Oct 2002 13:17:11 -0700 From: "Kevin Oberman" Message-Id: <20021021201711.EB2B75D03@ptavv.es.net> Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org > Date: Sat, 19 Oct 2002 22:16:31 -0700 > From: "Greg Smith" > > Kevin, > > I think the dmesg looks OK, IIRC. > > >> sio1: configured irq 3 not in bitmap of probed irqs 0 > > On my TP600 with 4.3-stable this is what I get without mwavedd > kldload'ed, but imodem definitely enabled on irq's 3 and 10 If you are loading mwavedd, you are loading an older version of mwavem. The current port creates 'mwave.ko'. > >> mwave0: on isa0 > >> Mwave Modem, UART settings IRQ 0x3 IO 0x2f8 > >> sio1 at port 0x2f8-0x2ff irq 3 on isa0 > >> sio1: type 16550A > > I think this is the result of kldload mwavedd [sadly I can't get mwave > to make on my 4.3-stable to verify my memory from 4.1]. Without the > mwavedd device driver there is no sio1. This is certainly true! Don't know how I missed it. It looks like everything loaded correctly if it not only sees sio1, but sees it as a 16550A. That means that the driver is actually communicating with the pseudo-device. The next question is whether the mwavem process is getting started. FWIW, I just tried this with 4.6-stable as of the day after 4.6.2 was released. I disabled loading mwave.ko at boot time and let the startup script do the job. I now see EXACTLY what Dave Walton saw, but my modem works fine. This is NOT assurance that it is the same, but it would be very close. At least I know my 600E is still working OK. R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Oct 21 21:46: 4 2002 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C1BB137B401 for ; Mon, 21 Oct 2002 21:46:03 -0700 (PDT) Received: from mta7.srv.hcvlny.cv.net (mta7.srv.hcvlny.cv.net [167.206.5.22]) by mx1.FreeBSD.org (Postfix) with ESMTP id 52FCC43E7B for ; Mon, 21 Oct 2002 21:46:03 -0700 (PDT) (envelope-from agapon@excite.com) Received: from edge.foundation.invalid (ool-182f90f3.dyn.optonline.net [24.47.144.243]) by mta7.srv.hcvlny.cv.net (iPlanet Messaging Server 5.2 HotFix 0.9 (built Jul 29 2002)) with ESMTP id <0H4D00H1B96HAX@mta7.srv.hcvlny.cv.net> for freebsd-mobile@freebsd.org; Tue, 22 Oct 2002 00:44:42 -0400 (EDT) Received: from localhost (localhost.foundation.invalid [127.0.0.1]) by edge.foundation.invalid (8.12.6/8.12.3) with ESMTP id g9M4iepg015422 for ; Tue, 22 Oct 2002 00:44:40 -0400 (EDT envelope-from agapon@excite.com) Date: Tue, 22 Oct 2002 00:44:40 -0400 (EDT) From: Andriy Gapon Subject: wi polling X-X-Sender: avg@edge.foundation.invalid To: freebsd-mobile@freebsd.org Message-id: <20021022004219.V15421-100000@edge.foundation.invalid> MIME-version: 1.0 Content-type: TEXT/PLAIN; charset=US-ASCII Content-transfer-encoding: 7BIT Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org is it possible to work with wi-supported devices in polling mode ? will it have any benefits over usual interrupt-driven mode ? have anybody tried ? thanks! -- Andriy Gapon * "Never try to outstubborn a cat." Lazarus Long, "Time Enough for Love" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon Oct 21 22:13:36 2002 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0E19137B401 for ; Mon, 21 Oct 2002 22:13:36 -0700 (PDT) Received: from harmony.village.org (rover.bsdimp.com [204.144.255.66]) by mx1.FreeBSD.org (Postfix) with ESMTP id 69EF143E65 for ; Mon, 21 Oct 2002 22:13:35 -0700 (PDT) (envelope-from imp@bsdimp.com) Received: from localhost (warner@rover2.village.org [10.0.0.1]) by harmony.village.org (8.12.3/8.12.3) with ESMTP id g9M5DSpk088618; Mon, 21 Oct 2002 23:13:29 -0600 (MDT) (envelope-from imp@bsdimp.com) Date: Mon, 21 Oct 2002 23:13:14 -0600 (MDT) Message-Id: <20021021.231314.36493344.imp@bsdimp.com> To: agapon@excite.com Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: wi polling From: "M. Warner Losh" In-Reply-To: <20021022004219.V15421-100000@edge.foundation.invalid> References: <20021022004219.V15421-100000@edge.foundation.invalid> X-Mailer: Mew version 2.1 on Emacs 21.2 / Mule 5.0 (SAKAKI) Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org In message: <20021022004219.V15421-100000@edge.foundation.invalid> Andriy Gapon writes: : is it possible to work with wi-supported devices in polling mode ? No. : will it have any benefits over usual interrupt-driven mode ? It would be slower. : have anybody tried ? Yes. It sucked really bad. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Oct 22 7:14: 0 2002 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C735C37B401 for ; Tue, 22 Oct 2002 07:13:58 -0700 (PDT) Received: from post-20.mail.nl.demon.net (post-20.mail.nl.demon.net [194.159.73.1]) by mx1.FreeBSD.org (Postfix) with ESMTP id D48FF43E75 for ; Tue, 22 Oct 2002 07:13:57 -0700 (PDT) (envelope-from h.kroonen@brinktech.nl) Received: from [195.173.234.248] (helo=server.brinktech.demon.nl) by post-20.mail.nl.demon.net with esmtp (Exim 3.36 #1) id 183znA-000Oqe-00 for freebsd-mobile@FreeBSD.ORG; Tue, 22 Oct 2002 14:13:57 +0000 Received: from harry (unknown [192.168.1.99]) by server.brinktech.demon.nl (Postfix) with ESMTP id 5502E7ABD; Tue, 22 Oct 2002 16:15:03 +0200 (CEST) From: "Harry Kroonen" To: FreeBSD Laptoppers Date: Tue, 22 Oct 2002 16:15:01 +0200 MIME-Version: 1.0 Subject: Re: hard drive Reply-To: h.kroonen@brinktech.nl Cc: FreeBSD Laptoppers Message-ID: <3DB57985.5105.6BB988A@localhost> In-reply-to: <20021021052818.GA554@laptop.6bone.nl> References: X-mailer: Pegasus Mail for Windows (v4.01) Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Content-description: Mail message body Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org Date sent: Mon, 21 Oct 2002 07:28:19 +0200 From: Mark Santcroos To: Randy Bush Copies to: FreeBSD Laptoppers Subject: Re: hard drive > On Sun, Oct 20, 2002 at 12:26:25PM -0700, Randy Bush wrote: > > for me, the bottleneck on laptops is the disk throughput. the hard > > drives themselves are slow, and the bandwidth to them sucks. for > > big makes etc., a 10GHz cpu would not improve throughput as much as > > doubling the disk goodput. > > > > is anybody making laptoys with real disk i/o subsystems? > > Imho the gap between desktop and laptop is getting smaller. There are > quite some laptops shipping with UDMA100 now. > > "dd if=/dev/ad0 of=/dev/null bs=4096" gives me 22 MB/s. I don't have a > recent desktop so I don't know how this compares to recent desktop > performance but I don't think it is bad. As some general info: I just did the same (count=10000) on a 'recent desktop' AMD1333 with ATA100 / 7200rpm Maxtor 740-DX drives, ad0 (40GB) giving me 22MB/s, ad4 (80GB) at 34MB/s. Laptop Celeron 500 / IBM HD : 16 MB/s More important in the laptop-arena is the difference in available HD's. With two laptops and two HD's I measured the time for "ls -lR /usr/ports" (and yes, both directories were identical ;-) ): Celeron 500 / IBM DJSA-220 : 1m56s Celeron 1100 / IBM DJSA-220 : 1m37s Celeron 500 / toshiba MK2018 : 6m21s Celeron 1100 / toshiba MK2018 : 5m35s (ls -lR /usr/ports on my desktop -> 0m40s) The toshiba was standard with the 1100-laptop (low-budget, from 2 months ago so I should expect that sort of performance), the IBM was a replacement drive (for the 500) bought separately about a year ago. So it looks to be more a difference of access time than of basic throughput. Anyway, just a few numbers, nothing scientific, Harry To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Oct 22 7:24:38 2002 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B954437B401 for ; Tue, 22 Oct 2002 07:24:36 -0700 (PDT) Received: from tonberry.chocobo.cx (innerwall.ironcastle.net [12.30.48.141]) by mx1.FreeBSD.org (Postfix) with ESMTP id AABA443E42 for ; Tue, 22 Oct 2002 07:24:35 -0700 (PDT) (envelope-from chip@tonberry.chocobo.cx) Received: from tonberry.chocobo.cx (localhost [127.0.0.1]) by tonberry.chocobo.cx (8.12.3/8.12.3) with ESMTP id g9MEOcuN001811 for ; Tue, 22 Oct 2002 10:24:39 -0400 (EDT) (envelope-from chip@tonberry.chocobo.cx) Received: (from chip@localhost) by tonberry.chocobo.cx (8.12.3/8.12.3/Submit) id g9MEOcDs001810 for freebsd-mobile@freebsd.org; Tue, 22 Oct 2002 10:24:38 -0400 (EDT) Date: Tue, 22 Oct 2002 10:24:38 -0400 From: Chip Marshall To: freebsd-mobile@freebsd.org Subject: PCMCIA Problems with sio and wi Message-ID: <20021022142437.GA697@chocobo.cx> Reply-To: chip@chocobo.cx Mail-Followup-To: freebsd-mobile@freebsd.org Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="liOOAslEiF7prFVr" Content-Disposition: inline X-URL: http://www.chocobo.cx/chip/ X-OS: FreeBSD 4.7-STABLE i386 up 4 mins User-Agent: Mutt/1.5.1i Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org --liOOAslEiF7prFVr Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi, I've got a Sony VAIO PCG GR300 running FreeBSD 4.7-STABLE. For a while now I've been using an SMC2632W wireless card, and it's been working great. Yesterday, I got a PCMCIA serial card, and started having some problems. If I insert the serial card first, and then the wireless card, the serial card will work fine, but the wireless card will get watchdog timeouts. If I insert the wireless card first, and then the serial card, the wireless card will work fine, but the serial card will have silo overflows. I think this is because they're both being assigned IRQ 3 by pccardd. I'm not sure how to fix this, since there are already a bunch of IRQs other than 3 listed in pccard.conf Any ideas? --=20 Chip Marshall http://www.chocobo.cx/chip/ GCM/CS d+(-) s+:++ a21>? C++ UB++++$ P+++$ L- E--- W++ N@ o K- w O M+ V-- PS+ PE Y+ PGP++ t+@ R@ tv@ b++@ DI++++ D+(-) G++ e>++ h>++ r++ y? --liOOAslEiF7prFVr Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.0 (FreeBSD) iD8DBQE9tV+l8vyTVl6qbdQRApQ6AKCpHB+D3lmTC09y6S+SWuA8ZWzFugCgzI1e xUaFyr10M5+81ada4eW9bwM= =iGqG -----END PGP SIGNATURE----- --liOOAslEiF7prFVr-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Oct 22 8:24:56 2002 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CDD0837B401 for ; Tue, 22 Oct 2002 08:24:55 -0700 (PDT) Received: from mta8.srv.hcvlny.cv.net (mta8.srv.hcvlny.cv.net [167.206.5.23]) by mx1.FreeBSD.org (Postfix) with ESMTP id 66CAF43E77 for ; Tue, 22 Oct 2002 08:24:53 -0700 (PDT) (envelope-from agapon@excite.com) Received: from edge.foundation.invalid (ool-182f90f3.dyn.optonline.net [24.47.144.243]) by mta8.srv.hcvlny.cv.net (iPlanet Messaging Server 5.2 HotFix 0.9 (built Jul 29 2002)) with ESMTP id <0H4E00DPC2OPBG@mta8.srv.hcvlny.cv.net> for freebsd-mobile@freebsd.org; Tue, 22 Oct 2002 11:22:01 -0400 (EDT) Received: from localhost (localhost.foundation.invalid [127.0.0.1]) by edge.foundation.invalid (8.12.6/8.12.3) with ESMTP id g9MFM6pg029805 for ; Tue, 22 Oct 2002 11:22:06 -0400 (EDT envelope-from agapon@excite.com) Date: Tue, 22 Oct 2002 11:22:06 -0400 (EDT) From: Andriy Gapon Subject: WMP11 and txpower X-X-Sender: avg@edge.foundation.invalid To: freebsd-mobile@freebsd.org Message-id: <20021022111541.Q29633-100000@edge.foundation.invalid> MIME-version: 1.0 Content-type: TEXT/PLAIN; charset=US-ASCII Content-transfer-encoding: 7BIT Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org From what I was able to find on the Internet, it seems to be possible to control output power of WMP11. Is there any way to do this on FreeBSD ? Linux (hostap?) driver control utility seems to have txpower option for this purpose. -- Andriy Gapon * "Never try to outstubborn a cat." Lazarus Long, "Time Enough for Love" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Oct 22 8:47:35 2002 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B531837B43F for ; Tue, 22 Oct 2002 08:47:33 -0700 (PDT) Received: from harmony.village.org (rover.bsdimp.com [204.144.255.66]) by mx1.FreeBSD.org (Postfix) with ESMTP id 260A343E6A for ; Tue, 22 Oct 2002 08:47:33 -0700 (PDT) (envelope-from imp@bsdimp.com) Received: from localhost (warner@rover2.village.org [10.0.0.1]) by harmony.village.org (8.12.3/8.12.3) with ESMTP id g9MFlTpk080437; Tue, 22 Oct 2002 09:47:30 -0600 (MDT) (envelope-from imp@bsdimp.com) Date: Tue, 22 Oct 2002 09:46:58 -0600 (MDT) Message-Id: <20021022.094658.104604595.imp@bsdimp.com> To: agapon@excite.com Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: WMP11 and txpower From: "M. Warner Losh" In-Reply-To: <20021022111541.Q29633-100000@edge.foundation.invalid> References: <20021022111541.Q29633-100000@edge.foundation.invalid> X-Mailer: Mew version 2.1 on Emacs 21.2 / Mule 5.0 (SAKAKI) Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org In message: <20021022111541.Q29633-100000@edge.foundation.invalid> Andriy Gapon writes: : From what I was able to find on the Internet, it seems to be possible to : control output power of WMP11. Is there any way to do this on FreeBSD ? : Linux (hostap?) driver control utility seems to have txpower option for : this purpose. In -current the kernel part of this are in the tree. The userland parts are in my tree, but haven't been committed yet. I'll be merging it into -stable soonish. Also, the Linux driver gets the power wrong. The numbers that you give it are pure fiction. It seems to think that these cards have 60dB of dynamic range, when the actual range is closer to 10-20dB. My cards seem to do about 100mW at max power, and about 5mW or 10mW at the low end, but these numbers are judged based on the link quality that we're seeing at the other end. 60dB of power control is pure fiction, since at the lowest power we're still transmitting power. Also, if you are looking to REDUCE power, you are likely OK. If you are looking to INCREASE power, you are putting yourself at risk of exceeding FCC spectrum regulations. This can result in very bad things happening to you if you are caught. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Oct 22 8:50:41 2002 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1C2F037B401 for ; Tue, 22 Oct 2002 08:50:40 -0700 (PDT) Received: from harmony.village.org (rover.bsdimp.com [204.144.255.66]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8779843E75 for ; Tue, 22 Oct 2002 08:50:39 -0700 (PDT) (envelope-from imp@bsdimp.com) Received: from localhost (warner@rover2.village.org [10.0.0.1]) by harmony.village.org (8.12.3/8.12.3) with ESMTP id g9MFoYpk080451; Tue, 22 Oct 2002 09:50:34 -0600 (MDT) (envelope-from imp@bsdimp.com) Date: Tue, 22 Oct 2002 09:50:03 -0600 (MDT) Message-Id: <20021022.095003.79284184.imp@bsdimp.com> To: chip@chocobo.cx Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: PCMCIA Problems with sio and wi From: "M. Warner Losh" In-Reply-To: <20021022142437.GA697@chocobo.cx> References: <20021022142437.GA697@chocobo.cx> X-Mailer: Mew version 2.1 on Emacs 21.2 / Mule 5.0 (SAKAKI) Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org In message: <20021022142437.GA697@chocobo.cx> Chip Marshall writes: : I think this is because they're both being assigned IRQ 3 by pccardd. : I'm not sure how to fix this, since there are already a bunch of IRQs : other than 3 listed in pccard.conf : : Any ideas? That should be fine. There's only one interrupt pin on these bridges. Maybe you could run with ISA interrupts instead of the default PCI interrupts for the chip. However, without dmesg it is hard to know for sure. Do you get these problems all the time, or just some of the time. Are both of them in use all the time? Maybe we have a starvation situation here. The wi driver's ISR is very piggy when it comes to hogging the CPU. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Oct 22 9: 7:34 2002 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CF94E37B401 for ; Tue, 22 Oct 2002 09:07:32 -0700 (PDT) Received: from shiva.jussieu.fr (shiva.jussieu.fr [134.157.0.129]) by mx1.FreeBSD.org (Postfix) with ESMTP id 995D043E42 for ; Tue, 22 Oct 2002 09:07:31 -0700 (PDT) (envelope-from talon@lpthe.jussieu.fr) Received: from parthe.lpthe.jussieu.fr (parthe.lpthe.jussieu.fr [134.157.10.1]) by shiva.jussieu.fr (8.12.5/jtpda-5.4) with ESMTP id g9MG7TjR008297 for ; Tue, 22 Oct 2002 18:07:29 +0200 (CEST) Received: from niobe.lpthe.jussieu.fr (u3jxdyb2jbr8tmv3@niobe.lpthe.jussieu.fr [134.157.10.41]) by parthe.lpthe.jussieu.fr (8.11.6/jtpda-5.4) with ESMTP id g9MG7Nj27652 for ; Tue, 22 Oct 2002 18:07:24 +0200 Received: from niobe.lpthe.jussieu.fr (988u573deq6w8ago@localhost [127.0.0.1]) by niobe.lpthe.jussieu.fr (8.12.6/8.12.6) with ESMTP id g9MG7Mpd019217 for ; Tue, 22 Oct 2002 18:07:23 +0200 (CEST) (envelope-from talon@niobe.lpthe.jussieu.fr) Received: (from talon@localhost) by niobe.lpthe.jussieu.fr (8.12.6/8.12.6/Submit) id g9MG7MOu019216 for freebsd-mobile@FreeBSD.ORG; Tue, 22 Oct 2002 18:07:22 +0200 (CEST) Date: Tue, 22 Oct 2002 18:07:21 +0200 From: Michel TALON To: freebsd-mobile@FreeBSD.ORG Subject: Suspend/resume Message-ID: <20021022160721.GA19189@lpthe.jussieu.fr> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4i X-Antivirus: scanned by sophie at shiva.jussieu.fr Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org Hello, I have already posted this here, but in the meantime i have read another message in cubfm of a guy with a similar problem: on my Dell Inspiron 3500 doing suspend and then resume, the pcmcia network card is not reset properly. This happens only since FreeBSD-4.7-RELEASE. I have options PCIC_RESUME_RESET in kernel config file. With FreeBSD-4.6.2 i had no problem. Now i have to remove the card and reinsert it to regain network connectivity. The card is a ne2000 clone using the ed driver. The other guy has exactly the same problem with another model of Dell Inspiron. Any idea? Thanks a lot. PS: Here is the dmesg after boot. I find it a little strange. pccard: card inserted, slot 1 pccard: card removed, slot 1 pccard: card inserted, slot 1 IP Filter: v3.4.29 initialized. Default = pass all, Logging = enabled ed0 at port 0x240-0x25f irq 11 flags 0x10 slot 1 on pccard1 ed0: address 00:80:c8:ba:87:88, type NE2000 (16 bit) -- Michel TALON To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Oct 22 9:33:14 2002 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id BE4D037B401 for ; Tue, 22 Oct 2002 09:33:13 -0700 (PDT) Received: from mail.orangexl.nl (orangexl.cust.2ndreality.nl [213.239.135.95]) by mx1.FreeBSD.org (Postfix) with SMTP id 9A1ED43E3B for ; Tue, 22 Oct 2002 09:33:12 -0700 (PDT) (envelope-from info@orangexl.com) Received: (qmail 48391 invoked by uid 89); 22 Oct 2002 16:34:19 -0000 Received: from cp262152-a.roose1.nb.home.nl (HELO CP262152A) (217.122.6.250) by orangexl.cust.2ndreality.nl with SMTP; 22 Oct 2002 16:34:19 -0000 Message-ID: <002001c279ea$c611aaf0$0200a8c0@CP262152A> From: "Sander Holthaus - Orange XL" To: References: <20020630151625.4BB7137B406@hub.freebsd.org> Subject: Date: Tue, 22 Oct 2002 18:47:56 +0200 Organization: Orange XL MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1106 Disposition-Notification-To: "Sander Holthaus - Orange XL" X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org subscribe hostmaster@orangexl.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue Oct 22 10:31:55 2002 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 797C137B404 for ; Tue, 22 Oct 2002 10:31:47 -0700 (PDT) Received: from tonberry.chocobo.cx (innerwall.ironcastle.net [12.30.48.141]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3E90243E75 for ; Tue, 22 Oct 2002 10:31:46 -0700 (PDT) (envelope-from chip@tonberry.chocobo.cx) Received: from tonberry.chocobo.cx (localhost [127.0.0.1]) by tonberry.chocobo.cx (8.12.3/8.12.3) with ESMTP id g9MHVUHj006884; Tue, 22 Oct 2002 13:31:30 -0400 (EDT) (envelope-from chip@tonberry.chocobo.cx) Received: (from chip@localhost) by tonberry.chocobo.cx (8.12.3/8.12.3/Submit) id g9MHVTc6006883; Tue, 22 Oct 2002 13:31:29 -0400 (EDT) Date: Tue, 22 Oct 2002 13:31:29 -0400 From: Chip Marshall To: "M. Warner Losh" Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: PCMCIA Problems with sio and wi Message-ID: <20021022173128.GA5868@chocobo.cx> Reply-To: chip@chocobo.cx Mail-Followup-To: "M. Warner Losh" , freebsd-mobile@FreeBSD.ORG References: <20021022142437.GA697@chocobo.cx> <20021022.095003.79284184.imp@bsdimp.com> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="H+4ONPRPur6+Ovig" Content-Disposition: inline In-Reply-To: <20021022.095003.79284184.imp@bsdimp.com> X-URL: http://www.chocobo.cx/chip/ X-OS: FreeBSD 4.7-STABLE i386 up 1:30 User-Agent: Mutt/1.5.1i Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org --H+4ONPRPur6+Ovig Content-Type: multipart/mixed; boundary="ReaqsoxgOBHFXBhH" Content-Disposition: inline --ReaqsoxgOBHFXBhH Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On October 22, 2002, M. Warner Losh sent me the following: > That should be fine. There's only one interrupt pin on these > bridges. Maybe you could run with ISA interrupts instead of the > default PCI interrupts for the chip. However, without dmesg it is > hard to know for sure. I'll attach a dmesg output to this message, hopefully that'll help. I tried dropped hw.pcic.intr_path=3D1 into loader.conf and rebooting. That seems to have helped, though I'm not 100% the wi card is happy right now, since I don't have an AP here to test with. > Do you get these problems all the time, or just some of the time. Are > both of them in use all the time? Maybe we have a starvation > situation here. The wi driver's ISR is very piggy when it comes to > hogging the CPU. The problems occured while I was at home using the wireless ethernet and attempted to talk to my GPS via the serial card. If I wasn't talking to the serial device it seemed to do okay. --=20 Chip Marshall http://www.chocobo.cx/chip/ GCM/CS d+(-) s+:++ a21>? C++ UB++++$ P+++$ L- E--- W++ N@ o K- w O M+ V-- PS+ PE Y+ PGP++ t+@ R@ tv@ b++@ DI++++ D+(-) G++ e>++ h>++ r++ y? --ReaqsoxgOBHFXBhH Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.txt" Content-Transfer-Encoding: quoted-printable Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.7-STABLE #6: Thu Oct 10 21:57:09 EDT 2002 root@tonberry.chocobo.cx:/usr/obj/usr/src/sys/TONBERRY Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (1126.83-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x6b1 Stepping =3D 1 Features=3D0x383f9ff real memory =3D 267911168 (261632K bytes) avail memory =3D 256958464 (250936K bytes) Preloaded elf kernel "kernel" at 0xc039c000. Preloaded elf module "linux.ko" at 0xc039c09c. Preloaded elf module "agp.ko" at 0xc039c13c. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 9 entries at 0xc00fdf30 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 agp0: mem 0xe0000000-0xefffffff at device = 0.0 on pci0 pcib1: at device 1.0 on p= ci0 pci1: on pcib1 pci1: at 0.0 irq 9 uhci0: port 0x1800-0x181f i= rq 9 at device 29.0 on pci0 uhci0: LegSup =3D 0x0000003b usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1: Genesys Logic USB Hub, class 9/0, rev 1.01/0.12, addr 2 uhub1: 4 ports with 4 removable, self powered ums0: Microsoft Microsoft IntelliMouse\M-. Explorer, rev 1.10/1.21, addr 3,= iclass 3/1 ums0: 5 buttons and Z dir. ukbd0: Logitech Logitech USB Keyboard, rev 1.10/12.00, addr 4, iclass 3/1 kbd1 at ukbd0 uhid0: Logitech Logitech USB Keyboard, rev 1.10/12.00, addr 4, iclass 3/0 uhci1: port 0x1820-0x183f i= rq 9 at device 29.1 on pci0 uhci1: LegSup =3D 0x00000010 usb1: on uhci1 usb1: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci2: port 0x1840-0x185f a= t device 29.2 on pci0 pci_cfgintr_search: linked (0) to configured irq 9 at 0:29:1 pci_cfgintr: 0:29 INTC routed to irq 9 usb2: on uhci2 usb2: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ugen0: Sony USB Memory Stick Slot, rev 1.10/1.83, addr 2 pcib2: at device 30.0 on = pci0 pci2: on pcib2 pci2: (vendor=3D0x104c, dev=3D0x8021) at 2.0 pcic0: irq 3 at device 5.0 on pci2 pcic0: PCI Memory allocated: 0x88000000 pccard0: on pcic0 pci_cfgintr_search: linked (0) to configured irq 3 at 2:5:0 pci_cfgintr: 2:5 INTB routed to irq 3 pcic1: irq 3 at device 5.1 on pci2 pcic1: PCI Memory allocated: 0x88001000 pccard1: on pcic1 fxp0: port 0x4000-0x403f mem 0xd0204000-0xd0204fff= irq 9 at device 8.0 on pci2 fxp0: Ethernet address 08:00:46:43:0f:08 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: at device 31.0 on = pci0 isa0: on isab0 atapci0: port 0x1860-0x186f,0x374-0x377,0x17= 0-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ichsmb0: port 0x1880-0x189f at devi= ce 31.3 on pci0 pci_cfgintr_search: linked (0) to configured irq 3 at 2:5:0 pci_cfgintr: 0:31 INTB routed to irq 3 smbus0: on ichsmb0 smb0: on smbus0 pci0: (vendor=3D0x8086, dev=3D0x2485) at 31.5 irq 9 pci0: (vendor=3D0x8086, dev=3D0x2486) at 31.6 orm0: