Date: Sun, 24 Oct 2004 21:59:37 +0200 (CEST) From: Goran Gajic <ggajic@mail.sbb.co.yu> To: Lars Tunkrans <lars.tunkrans@bredband.net> Cc: freebsd-amd64@www.freebsd.org Subject: Re: FBSD 5.3RC1 on Fujitsu Siemens CELSIUS Message-ID: <Pine.BSF.4.60.0410242152050.14363@mail.sbb.co.yu> In-Reply-To: <417BA728.30305@bredband.net> References: <Pine.BSF.4.60.0410232309150.99910@mail.sbb.co.yu> <417BA728.30305@bredband.net>
next in thread | previous in thread | raw e-mail | index | archive | help
You are right. It has Fujitsu-Siemens motherboard. It has only one NIC, integrated Broadcom. Since I need two NIC, second one is sk, pci card, not integrated. On 5.2.1 problem with sk was solvied by inseting fxp and using it instead. I have expected that problem with sk will be gone with 5.3 but it is still present - and machine is even rebooting for no reason. Regards, Goran Gajic On Sun, 24 Oct 2004, Lars Tunkrans wrote: > Goran Gajic wrote: >> >> Hi, >> >> I have installed FreeBSD 5.3RC1 on Fujitsu Siemenes Celsius. First problem >> I had was with sk0. It stops responding and all I can do is ifconfig sk0 >> down and then ifconfig sk0 up to reset it. Second, server reboots without >> reason. What can I do to provide more information about spontanious >> reboots. I'm also sending pciconf -vl as attachment. I didn't compiled >> kernel I'm using GENERIC. > > The technical Overview for Celsius V accessible from this URL: > > http://www.fujitsu-siemens.com/products/deskbound/workstations/celsius_v.html > > Says that its supposed to have a Broadcom gigabit Ethernet i/F bge0 which is > also found in the pciconf list you supplied. > Have you installed an extra syskonnekt pci card in the machine ? > > As this is a DUAL Opteron machine with AMD8000 chipset its either a Tyan > board > or something Fujitsu built themselves. >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.60.0410242152050.14363>