Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 1 Dec 2012 10:08:51 +0330
From:      saeedeh motlagh <>
To:        Fbsd8 <>
Cc:        s m <>, freebsd-questions <>
Subject:   Re: set connection to a modem
Message-ID:  <>
In-Reply-To: <>
References:  <> <> <> <>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
thanks Ilya for your reply.  i'm using putty to connect to my modem
and also/dev/cuauo as the config file. i can co
nnect to my modem and it responses to AT commands that you suggest so every
thing is ok.

my question is: this connection via /dev/cuau0 can be configured, doesn't
it? and if yes, through which config file i can set these settings such as
speed, flow control, etc. for this connection?  for example, my modem
works just
with a specific speed. how i can tell  /dev/cuau0 device to talk to my
modem with this speed? as i have no idea how to config the connection speed
for this /dev/cuau0 device..

any guidance would be really appreciated.

On Fri, Nov 30, 2012 at 1:19 AM, Fbsd8 <> wrote:

> s m wrote:
>> thanks guys for your replies,
>> now i understand two types of connections are available by modem, dial-in
>> and dial-out.
>> honestly, i should do it for my boss and don't know what he should want
>> exactly to do but i am sure that he has an external serial modem and wants
>> to config it by AT commands via a freebsd system; therefore i think our
>> connection is dial-out.
>> now which files i should edit? just ppp.conf? and because our modem
>> supports specific speed and flow control, is it necessary to set these
>> parameters in my freebsd? and if yes, how i can do that?  please help me
>> to
>> do that
>> thanks
> There are very detailed ppp configuration instructions here
> ______________________________**_________________
> mailing list
> To unsubscribe, send any mail to "freebsd-questions-**
> <>"

Want to link to this message? Use this URL: <>