Date: Wed, 25 Jul 2007 14:09:34 +0300 From: Mihai Tanasescu <mihai@duras.ro> To: Ganbold <ganbold@micom.mng.net> Cc: freebsd-net@freebsd.org Subject: Re: mpd and vlan Message-ID: <46A72F6E.80704@duras.ro> In-Reply-To: <46A72DF3.8040109@micom.mng.net> References: <1159971789.00612536.1159960802@10.7.7.3> <4524055D.7060906@mavhome.dp.ua> <4529C408.5070807@micom.mng.net> <452A008B.8040804@mavhome.dp.ua> <452A0F2A.3000901@micom.mng.net> <452A164A.9080507@mavhome.dp.ua> <45814888.1060301@micom.mng.net> <45814B40.4080004@mavhome.dp.ua> <46A72173.7070907@micom.mng.net> <46A72BFF.1020301@duras.ro> <46A72DF3.8040109@micom.mng.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Ganbold wrote: > Mihai Tanasescu wrote: >> Sorry for asking as a follow-up to your question...but do you have a >> working config for MPD and pptp. >> >> >> I'm desperately trying to get mine to work...but mpd refuses to >> listen to connections on my interface (it starts, it gives no errors, >> it loads the pptp1 config, I can access its console, etc). >> >> >> >> >> >> > Something like: > > default: > load pptp0 > load pptp1 > > pptp0: > new -i ng0 pptp0 pptp0 > set ipcp ranges 192.168.1.2/32 192.168.5.1/24 > load pptp_standard > > pptp1: > new -i ng1 pptp1 pptp1 > set ipcp ranges 192.168.1.2/32 192.168.5.2/24 > load pptp_standard > > pptp_standard: > > set iface idle 0 > set iface disable on-demand > set iface disable proxy-arp > set iface enable tcpmssfix > set iface mtu 1500 > set iface route default > set iface enable radius-session > > set bundle no multilink > set bundle disable multilink > set bundle enable compression > set bundle max-logins 3 > set bundle enable radius-acct > set bundle enable radius-auth > > # set link type pptp > set link no pap > set link enable chap > set link keep-alive 10 60 > set link max-redial -1 > set link yes acfcomp protocomp > set link mtu 1460 > set link latency 0 > > > set ipcp dns 192.168.1.1 192.168.0.1 > set ipcp yes vjcomp > > set ccp yes mppc > set ccp yes mpp-e40 > > > > mpd.links > --------------------------------------- > pptp0: > set link type pptp > set pptp self 192.168.1.1 > set pptp enable incoming > set pptp disable originate > pptp1: > set link type pptp > set pptp self 192.168.1.1 > set pptp enable incoming > set pptp disable originate > > set ccp yes mpp-e128 > set ccp yes mpp-stateless > > set pptp self 192.168.1.1 > set pptp enable incoming > set pptp disable originate > > ############### > > set radius timeout 10 > set radius config /usr/local/etc/mpd/radius.conf > set radius retries 3 > > I tested it a long ago with mpd-3.18. It worked at that time. > > hth, > > Ganbold > > Thanks, Now it works...got to figure out what I was missing.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?46A72F6E.80704>