Date: 2 Nov 2003 03:18:20 -0000 From: Bill Trost <trost@cloud.rain.com> To: FreeBSD-gnats-submit@FreeBSD.org Subject: i386/58826: reboot on an IBM PC Server 315 merely halts Message-ID: <20031102031820.1948.qmail@cloud.rain.com> Resent-Message-ID: <200311020320.hA23KHkd004594@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 58826
>Category: i386
>Synopsis: reboot on an IBM PC Server 315 merely halts
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-i386
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sat Nov 01 19:20:17 PST 2003
>Closed-Date:
>Last-Modified:
>Originator: Bill Trost
>Release: FreeBSD 5.1-RELEASE i386
>Organization:
>Environment:
System: FreeBSD grey.cloud.rain.com 5.1-RELEASE FreeBSD 5.1-RELEASE #0: Wed Aug 20 20:29:48 PDT 2003 root@grey.cloud.rain.com:/mnt/usr/src/sys/i386/compile/MINIMAL i386
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE #0: Wed Aug 20 20:29:48 PDT 2003
root@grey.cloud.rain.com:/mnt/usr/src/sys/i386/compile/MINIMAL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04e1000.
Preloaded elf module "/boot/kernel/vesa.ko" at 0xc04e11f4.
Preloaded elf module "/boot/kernel/cd9660.ko" at 0xc04e12a0.
Preloaded elf module "/boot/kernel/msdosfs.ko" at 0xc04e134c.
Preloaded elf module "/boot/kernel/nfsclient.ko" at 0xc04e13f8.
Preloaded elf module "/boot/kernel/procfs.ko" at 0xc04e14a8.
Preloaded elf module "/boot/kernel/md.ko" at 0xc04e1554.
Preloaded elf module "/boot/kernel/if_gif.ko" at 0xc04e15fc.
Preloaded elf module "/boot/kernel/if_stf.ko" at 0xc04e16a8.
Preloaded elf module "/boot/kernel/if_de.ko" at 0xc04e1754.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc04e1800.
Preloaded elf module "/boot/kernel/ugen.ko" at 0xc04e18ac.
Preloaded elf module "/boot/kernel/random.ko" at 0xc04e1958.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04e1a04.
Preloaded elf module "/boot/kernel/s3.ko" at 0xc04e1ab0.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 199310065 Hz
CPU: Pentium Pro (199.31-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x619 Stepping = 9
Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV>
real memory = 134217728 (128 MB)
avail memory = 125054976 (119 MB)
Pentium Pro MTRR support enabled
VESA: v1.2, 2048k memory, flags:0x0, mode table:0xc00c4b2b (c0004b2b)
VESA: S3 Incorporated. Trio64V+
ACPI-0159: *** Error: AcpiLoadTables: Could not get RSDP, AE_NO_ACPI_TABLES
ACPI-0213: *** Error: AcpiLoadTables: Could not load tables: AE_NO_ACPI_TABLES
ACPI: table load failed: AE_NO_ACPI_TABLES
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
Correcting Natoma config for non-SMP
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0xfff0-0xffff at device 1.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0x5000-0x501f irq 11 at device 1.2 on pci0
usb0: <Intel 82371SB (PIIX3) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib1: <PCI-PCI bridge> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x7000-0x70ff mem 0x50100000-0x50100fff irq 15 at device 2.0 on pci1
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
pcib2: <PCI-PCI bridge> at device 4.0 on pci1
pci2: <PCI bus> on pcib2
de0: <Digital 21040 Ethernet> port 0x6480-0x64ff mem 0x50000180-0x500001ff irq 14 at device 4.0 on pci2
de0: ZNYX ZX314 21040 [10Mb/s] pass 2.4
de0: address 00:c0:95:f0:3e:20
de0: enabling 10baseT port
de1: <Digital 21040 Ethernet> port 0x6400-0x647f mem 0x50000100-0x5000017f irq 10 at device 5.0 on pci2
de1: ZNYX ZX314 21040 [10Mb/s] pass 2.4
de1: address 00:c0:95:f0:3e:21
de1: enabling 10baseT port
de2: <Digital 21040 Ethernet> port 0x6080-0x60ff mem 0x50000080-0x500000ff irq 15 at device 6.0 on pci2
de2: ZNYX ZX314 21040 [10Mb/s] pass 2.4
de2: address 00:c0:95:f0:3e:22
de2: enabling 10baseT port
de3: <Digital 21040 Ethernet> port 0x6000-0x607f mem 0x50000000-0x5000007f irq 11 at device 7.0 on pci2
de3: ZNYX ZX314 21040 [10Mb/s] pass 2.4
de3: address 00:c0:95:f0:3e:23
de3: enabling 10baseT port
s3pci0: <S3 graphic card> port 0x4ae8,0x3c0-0x3df mem 0x40000000-0x43ffffff irq 11 at device 15.0 on pci0
pmtimer0 on isa0
orm0: <Option ROMs> at iomem 0xc8000-0xcefff,0xc0000-0xc7fff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: cannot reserve I/O port range
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2 at port 0x3e8-0x3ef irq 5 on isa0
sio2: type 16550A
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
ppc1: <ECP parallel printer port> at port 0x3bc-0x3bf irq 7 on isa0
ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc1
ppbus0: IEEE1284 device found
Probing for PnP devices on ppbus0:
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
Timecounters tick every 10.000 msec
Waiting 15 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 1 lun 0
sa0: <HP HP35480A T603> Removable Sequential Access SCSI-2 device
sa0: 5.000MB/s transfers (5.000MHz, offset 8)
cd0 at ahc0 bus 0 target 6 lun 0
cd0: <IBM CDRM00203\\000\\000\\000\\000\\000!K 8B08> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da1 at ahc0 bus 0 target 4 lun 0
da1: <IBM-PSG DNES-309170W !# SAB0> Fixed Direct Access SCSI-3 device
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 8678MB (17774160 512 byte sectors: 255H 63S/T 1106C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DCAS-34330 !# S63A> Fixed Direct Access SCSI-2 device
da0: 20.000MB/s transfers (20.000MHz, offset 15)
da0: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C)
Mounting root from ufs:/dev/da1s1a
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled
>Description:
When I run "reboot", the machine syncs the disks and all that good
stuff, then claims to be rebooting, but then just hangs. Ctl-alt-del
has no effect -- I have to go for the power switch.
>How-To-Repeat:
Get an IBM PC Server 315, install FreeBSD 5.1, and run "reboot".
>Fix:
unknown
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031102031820.1948.qmail>