From owner-freebsd-current Sun Jan 19 3:26: 6 2003 Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A648137B401 for ; Sun, 19 Jan 2003 03:25:54 -0800 (PST) Received: from aline.bs2.com.br (aline.bs2.com.br [200.203.159.61]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6267A43EB2 for ; Sun, 19 Jan 2003 03:25:53 -0800 (PST) (envelope-from tirloni@aline.bs2.com.br) Received: from aline.bs2.com.br (IDENT:gpt@localhost [127.0.0.1]) by aline.bs2.com.br (8.12.3/8.12.3) with ESMTP id h0JBPgGo060470; Sun, 19 Jan 2003 09:25:42 -0200 (BRST) (envelope-from tirloni@aline.bs2.com.br) Received: (from tirloni@localhost) by aline.bs2.com.br (8.12.3/8.12.3/Submit) id h0JBPeXc059866; Sun, 19 Jan 2003 09:25:40 -0200 (BRST) Date: Sun, 19 Jan 2003 09:25:40 -0200 From: "Giovanni P. Tirloni" To: Anti Cc: current@FreeBSD.ORG Subject: Re: MSDOS fs install problem Message-ID: <20030119112540.GA11683@aline.bs2.com.br> References: <20030119032511.GD30901@aline.bs2.com.br> <20030118225201.6eb2822d.fearow@attbi.com> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline In-Reply-To: <20030118225201.6eb2822d.fearow@attbi.com> User-Agent: Mutt/1.4i X-Info: http://www.tirloni.org Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG * Anti (fearow@attbi.com) wrote: > On Sun, 19 Jan 2003 01:25:12 -0200 > "Giovanni P. Tirloni" wrote: > > > Hi, > > > > I was trying to install FreeBSD -CURRENT snapshot from > > 2003-01-16 (current.freebsd.org snapshots) and got this > > error > > > > Error mounting /dev/ad0s1 on /dist: Operation not \ > > supported by device (19) > > > > while trying to mount the slice that had FreeBSD/ on > > it. It happened with other snapshots too. > > > > Is it still possible to install from a MSDOS partition > > by default ? > > sysinstall in -current could never find my msdos partition to > install from... The partition it found (ad0s1) is the right one but it couldn't mount it. -- Giovanni P. Tirloni gpt@tirloni.org You can have anything you want if you will give up the belief that you can't have it. -- Robert Anthony To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message From owner-freebsd-current Sun Jan 19 4: 5:45 2003 Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6805A37B401 for ; Sun, 19 Jan 2003 04:05:17 -0800 (PST) Received: from beast.freebsd.org (beast.freebsd.org [216.136.204.28]) by mx1.FreeBSD.org (Postfix) with ESMTP id DED1943E4A for ; Sun, 19 Jan 2003 04:05:16 -0800 (PST) (envelope-from des@FreeBSD.org) Received: from beast.freebsd.org (localhost [127.0.0.1]) by beast.freebsd.org (8.12.6/8.12.6) with ESMTP id h0JC5GJM023944 for ; Sun, 19 Jan 2003 04:05:16 -0800 (PST) (envelope-from des@beast.freebsd.org) Received: (from des@localhost) by beast.freebsd.org (8.12.6/8.12.6/Submit) id h0JC5GCj023942 for current@freebsd.org; Sun, 19 Jan 2003 04:05:16 -0800 (PST) Date: Sun, 19 Jan 2003 04:05:16 -0800 (PST) From: Dag-Erling Smorgrav Message-Id: <200301191205.h0JC5GCj023942@beast.freebsd.org> To: current@freebsd.org Subject: alpha tinderbox failure Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG -------------------------------------------------------------- >>> Rebuilding the temporary build tree -------------------------------------------------------------- >>> stage 1: bootstrap tools -------------------------------------------------------------- >>> stage 2: cleaning up the object tree -------------------------------------------------------------- >>> stage 2: rebuilding the object tree -------------------------------------------------------------- >>> stage 2: build tools -------------------------------------------------------------- >>> stage 3: cross tools -------------------------------------------------------------- >>> stage 4: populating /home/des/tinderbox/alpha/obj/h/des/src/alpha/usr/include -------------------------------------------------------------- >>> stage 4: building libraries -------------------------------------------------------------- >>> stage 4: make dependencies -------------------------------------------------------------- >>> stage 4: building everything.. -------------------------------------------------------------- >>> Kernel build for GENERIC started on Sun Jan 19 03:03:41 PST 2003 -------------------------------------------------------------- >>> Kernel build for GENERIC completed on Sun Jan 19 03:36:18 PST 2003 -------------------------------------------------------------- >>> Kernel build for LINT started on Sun Jan 19 03:36:18 PST 2003 -------------------------------------------------------------- ===> vinum "Makefile", line 4437: warning: duplicate script for target "geom_bsd.o" ignored /h/des/src/sys/dev/lmc/if_lmc.c:32:2: warning: #warning "The lmc driver is broken and is not compiled with LINT" /h/des/src/sys/dev/pdq/pdq.c: In function `pdq_initialize': /h/des/src/sys/dev/pdq/pdq.c:1606: warning: cast discards qualifiers from pointer target type /h/des/src/sys/pci/meteor.c:149:2: warning: #warning "The meteor driver is broken and is not compiled with LINT" /h/des/src/sys/pci/simos.c:30:2: warning: #warning "The simos driver is broken and is not compiled with LINT" cc1: warnings being treated as errors /h/des/src/sys/dev/advansys/adv_isa.c: In function `adv_isa_probe': /h/des/src/sys/dev/advansys/adv_isa.c:232: warning: overflow in implicit constant conversion *** Error code 1 Stop in /h/des/obj/h/des/src/sys/LINT. *** Error code 1 Stop in /h/des/src. *** Error code 1 Stop in /h/des/src. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message From owner-freebsd-current Sun Jan 19 6:57: 9 2003 Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E996537B401; Sun, 19 Jan 2003 06:57:08 -0800 (PST) Received: from scrooge.etek.chalmers.se (scrooge.etek.chalmers.se [129.16.32.112]) by mx1.FreeBSD.org (Postfix) with ESMTP id 86EC843ED8; Sun, 19 Jan 2003 06:57:07 -0800 (PST) (envelope-from b@etek.chalmers.se) Received: from scrooge.etek.chalmers.se (b@localhost [127.0.0.1]) by scrooge.etek.chalmers.se (8.12.3/8.12.3) with ESMTP id h0JEulca011693; Sun, 19 Jan 2003 15:56:47 +0100 (CET) (envelope-from b@etek.chalmers.se) Received: from localhost (b@localhost) by scrooge.etek.chalmers.se (8.12.3/8.12.3/Submit) with ESMTP id h0JEukAT011690; Sun, 19 Jan 2003 15:56:47 +0100 (CET) X-Authentication-Warning: scrooge.etek.chalmers.se: b owned process doing -bs Date: Sun, 19 Jan 2003 15:56:46 +0100 (CET) From: Magnus B{ckstr|m To: "M. Warner Losh" Cc: sam@errno.com, , Subject: Re: HEADS UP: new wi driver In-Reply-To: <20030117.102821.89423323.imp@bsdimp.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > : dstumbler breaks; on startup it reports > : "unable to ioctl device socket: Input/output error". > > As root or no? As root, with interface up and configured. Magnus To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message From owner-freebsd-current Sun Jan 19 7: 4:15 2003 Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9D7DB37B401 for ; Sun, 19 Jan 2003 07:04:13 -0800 (PST) Received: from critter.freebsd.dk (critter.freebsd.dk [212.242.86.163]) by mx1.FreeBSD.org (Postfix) with ESMTP id CC00743EB2 for ; Sun, 19 Jan 2003 07:04:12 -0800 (PST) (envelope-from phk@critter.freebsd.dk) Received: from critter.freebsd.dk (localhost [127.0.0.1]) by critter.freebsd.dk (8.12.6/8.12.6) with ESMTP id h0JF3isK008695 for ; Sun, 19 Jan 2003 16:03:44 +0100 (CET) (envelope-from phk@critter.freebsd.dk) To: current@freebsd.org Subject: HEADSUP: CCD(4) hackery... Date: Sun, 19 Jan 2003 16:03:44 +0100 Message-ID: <8694.1042988624@critter.freebsd.dk> From: Poul-Henning Kamp Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG ------- Forwarded Message From: Poul-Henning Kamp Date: Sun, 19 Jan 2003 07:00:58 -0800 (PST) To: cvs-committers@FreeBSD.org, cvs-all@FreeBSD.org phk 2003/01/19 07:00:58 PST Modified files: sys/sys ccdvar.h sys/dev/ccd ccd.c Log: Finally give CCD the disk mini-layer treatment: CAUTION: Previously CCD would be different from all other disks in the system in that there were no "ccd0" device, only a "ccd0c" device. This is no longer so after this commit. If you access a ccd device through the "/dev/ccd0c" device _and_ have not actually put a BSD disklabel on the device, you will have to use the name "/dev/ccd0". If your CCD device contains a BSD disklabel there should be no difference. You need to recompile ccdconfig(8) using the changed src/sys/sys/ccdvar.h for the -g "show me" option to work. I have run the regression test I created before I started overhauling CCD and it flags no problems, but this code is mildly evil, so take care. If you would cry if you lost what's on CCD, make a back before you upgrade. Create separate cdevsw for the /dev/ccd.ctl device. Remove the cloning function, the disk-minilayer will do all naming for us. Remove the ccdunit and ccdpart functions and carry the softc pointer in the relevant dev_t's and structures. Release all memory when a CCD device is unconfigured, previously the softc would linger behind. Remove all traces of BSD disklabel fiddling code. Remove ccdpsize, the disk mini-layer does this for us. Don't allocate memory with M_WAITOK in ccdstrategy(). Remove boundary checks which the disk mini-layer does for us. Don't allocate space for more than 2 ccdbuf, RAID was never implemented. NB: I have not tried to address any of the preexisting ailments of CCD. Revision Changes Path 1.121 +143 -431 src/sys/dev/ccd/ccd.c 1.15 +2 -1 src/sys/sys/ccdvar.h ------- End of Forwarded Message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message From owner-freebsd-current Sun Jan 19 7:26:26 2003 Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 632EA37B401 for ; Sun, 19 Jan 2003 07:26:25 -0800 (PST) Received: from axl.seasidesoftware.co.za (axl.seasidesoftware.co.za [196.31.7.201]) by mx1.FreeBSD.org (Postfix) with ESMTP id DE96643EB2 for ; Sun, 19 Jan 2003 07:26:23 -0800 (PST) (envelope-from sheldonh@starjuice.net) Received: from sheldonh by axl.seasidesoftware.co.za with local (Exim 4.10) id 18aHL3-000AHN-00 for current@FreeBSD.org; Sun, 19 Jan 2003 17:26:21 +0200 Date: Sun, 19 Jan 2003 17:26:21 +0200 From: Sheldon Hearn To: current@FreeBSD.org Subject: OpenOffice swriter working on -CURRENT Message-ID: <20030119152621.GF38400@starjuice.net> Mail-Followup-To: current@FreeBSD.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.3i Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi folks, Could someone with an up-to-date -CURRENT (as of anything since Wednesday last week) and OpenOffice let me know whether OpenOffice's swriter works? For me, works just implies that it starts up on a blank document before core dumping, and then accepts at least one character of input. Thanks, Sheldon. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message From owner-freebsd-current Sun Jan 19 7:27:49 2003 Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E23C337B401 for ; Sun, 19 Jan 2003 07:27:48 -0800 (PST) Received: from espresso.q9media.com (espresso.q9media.com [65.39.129.122]) by mx1.FreeBSD.org (Postfix) with ESMTP id 75D3543ED8 for ; Sun, 19 Jan 2003 07:27:48 -0800 (PST) (envelope-from mike@espresso.q9media.com) Received: by espresso.q9media.com (Postfix, from userid 1002) id 802A29C54; Sun, 19 Jan 2003 10:16:22 -0500 (EST) Date: Sun, 19 Jan 2003 10:16:22 -0500 From: Mike Barcroft To: current@freebsd.org Subject: Re: alpha tinderbox failure Message-ID: <20030119101622.G58850@espresso.q9media.com> References: <200301191205.h0JC5GCj023942@beast.freebsd.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <200301191205.h0JC5GCj023942@beast.freebsd.org>; from des@FreeBSD.org on Sun, Jan 19, 2003 at 04:05:16AM -0800 Organization: The FreeBSD Project Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Dag-Erling Smorgrav writes: > -------------------------------------------------------------- > >>> Kernel build for LINT started on Sun Jan 19 03:36:18 PST 2003 > -------------------------------------------------------------- > ===> vinum > "Makefile", line 4437: warning: duplicate script for target "geom_bsd.o" ignored > /h/des/src/sys/dev/lmc/if_lmc.c:32:2: warning: #warning "The lmc driver is broken and is not compiled with LINT" > /h/des/src/sys/dev/pdq/pdq.c: In function `pdq_initialize': > /h/des/src/sys/dev/pdq/pdq.c:1606: warning: cast discards qualifiers from pointer target type > /h/des/src/sys/pci/meteor.c:149:2: warning: #warning "The meteor driver is broken and is not compiled with LINT" > /h/des/src/sys/pci/simos.c:30:2: warning: #warning "The simos driver is broken and is not compiled with LINT" > cc1: warnings being treated as errors > /h/des/src/sys/dev/advansys/adv_isa.c: In function `adv_isa_probe': > /h/des/src/sys/dev/advansys/adv_isa.c:232: warning: overflow in implicit constant conversion > *** Error code 1 Fixed. Peter fixed the same problem elsewhere, but must have missed this one. Best regards, Mike Barcroft To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message From owner-freebsd-current Sun Jan 19 7:39: 4 2003 Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DF1EA37B401 for ; Sun, 19 Jan 2003 07:39:02 -0800 (PST) Received: from gypsy.vrac.iastate.edu (gypsy.vrac.iastate.edu [129.186.232.122]) by mx1.FreeBSD.org (Postfix) with ESMTP id 330A243F43 for ; Sun, 19 Jan 2003 07:39:02 -0800 (PST) (envelope-from patrick@137.org) Received: from 137.org (plan114-105.icsincorporated.com [65.171.114.105]) by gypsy.vrac.iastate.edu (Postfix) with ESMTP id AFE2E18; Sun, 19 Jan 2003 09:38:56 -0600 (CST) Message-ID: <3E2AC68F.90604@137.org> Date: Sun, 19 Jan 2003 09:38:55 -0600 From: Patrick Hartling User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.1) Gecko/20021215 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Sheldon Hearn Cc: current@FreeBSD.org Subject: Re: OpenOffice swriter working on -CURRENT References: <20030119152621.GF38400@starjuice.net> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Based on your definition of "works," I would say that mine does not. :( I just updated my -current system about 12 hours ago. -Patrick Sheldon Hearn wrote: > Hi folks, > > Could someone with an up-to-date -CURRENT (as of anything since > Wednesday last week) and OpenOffice let me know whether OpenOffice's > swriter works? > > For me, works just implies that it starts up on a blank document before > core dumping, and then accepts at least one character of input. > > Thanks, > Sheldon. > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-current" in the body of the message -- Patrick L. Hartling | Research Assistant, VRAC patrick@137.org | 2274 Howe Hall Room 2624 PGP: http://www.137.org/patrick/pgp.txt | T: +1.515.294.4916 http://www.137.org/patrick/ | http://www.vrac.iastate.edu/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message From owner-freebsd-current Sun Jan 19 7:49:48 2003 Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6372037B401; Sun, 19 Jan 2003 07:49:47 -0800 (PST) Received: from cheer.mahoroba.org (flets19-241.kamome.or.jp [218.45.19.241]) by mx1.FreeBSD.org (Postfix) with ESMTP id DEE4F43EB2; Sun, 19 Jan 2003 07:49:37 -0800 (PST) (envelope-from ume@mahoroba.org) Received: from lyrics.mahoroba.org (IDENT:7HNKcwLLU7gWBav5zpi7zTnouSbC5FBjeuMKVCnTOcOvlFw/kZZclYduEEeKf6+t@lyrics.mahoroba.org [IPv6:3ffe:501:185b:8010:280:88ff:fe03:4841]) (user=ume mech=CRAM-MD5 bits=0) by cheer.mahoroba.org (8.12.7/8.12.7) with ESMTP/inet6 id h0JFnQRv086986 (version=TLSv1/SSLv3 cipher=EDH-RSA-DES-CBC3-SHA bits=168 verify=NO); Mon, 20 Jan 2003 00:49:26 +0900 (JST) (envelope-from ume@mahoroba.org) Date: Mon, 20 Jan 2003 00:49:26 +0900 Message-ID: From: Hajimu UMEMOTO To: current@FreeBSD.org, emulation@FreeBSD.org Subject: [CFR] IPv6 support for Linux sym User-Agent: Wanderlust/2.11.0 (Wonderwall) SEMI/1.14.4 (Hosorogi) FLIM/1.14.4 (=?ISO-8859-4?Q?Kashiharajing=FE-mae?=) APEL/10.4 Emacs/21.2 (i386--freebsd) MULE/5.0 (=?ISO-2022-JP?B?GyRCOC1MWhsoQg==?=) X-Operating-System: FreeBSD 5.0-CURRENT MIME-Version: 1.0 (generated by SEMI 1.14.4 - "Hosorogi") Content-Type: text/plain; charset=US-ASCII X-Virus-Scanned: by AMaViS-perl11-milter (http://amavis.org/) X-Spam-Status: No, hits=0.3 required=5.0 tests=SPAM_PHRASE_00_01,USER_AGENT version=2.43 Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I wrote an IPv6 support for Linux sym. I've tested it with RHL8's ftp(1) and ports/www/linux-phoenix, and it seems nicely running with both an IPv4 and an IPv6. You can obtain my patch from: http://www.imasy.or.jp/~ume/FreeBSD/linux-ipv6.diff Please review it. Sincerely, -- Hajimu UMEMOTO @ Internet Mutual Aid Society Yokohama, Japan ume@mahoroba.org ume@bisd.hitachi.co.jp ume@{,jp.}FreeBSD.org http://www.imasy.org/~ume/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message From owner-freebsd-current Sun Jan 19 7:55:31 2003 Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5DB6937B401 for ; Sun, 19 Jan 2003 07:55:30 -0800 (PST) Received: from globalit.internetx.de (globalit.internetx.de [62.116.147.2]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0F20543F18 for ; Sun, 19 Jan 2003 07:55:29 -0800 (PST) (envelope-from H@Schmalzbauer.de) Received: from hscpr (ppp-62-245-163-224.mnet-online.de [62.245.163.224]) (authenticated bits=0) by globalit.internetx.de (8.12.2/8.12.2) with ESMTP id h0JFtJlB030252 for ; Sun, 19 Jan 2003 16:55:19 +0100 From: "Harald Schmalzbauer" To: Subject: How to use atacontrol rebuild Date: Sun, 19 Jan 2003 16:55:22 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106 Importance: Normal Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello all, I have a Dawicontrol DC100 ATA-RAIDController (HPT370). I built a RAID1 mirror, installed FreeBSD 5.0 RC3, everithing is working fine. But I wanted to test this RAID1, so I unplugged the power from one dirve (2 IBM ICxxxx, 80GB). After reconnecting the power a "atacontrol attach" didn't help. I rebooted and rebuilt the array with the BIOS. Then I made a "atacontrol detach 3", the drive vansihed but when I used "atacontrol attach" I got "no drives" (the disk was physically untouched!). Also "reinit" didn't help. Same with "rebuild". I don't get any error but nothing happens! Any hint appreciated! -Harry To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message From owner-freebsd-current Sun Jan 19 9:51:38 2003 Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 3F27337B406 for ; Sun, 19 Jan 2003 09:51:33 -0800 (PST) Received: from magic.adaptec.com (magic.adaptec.com [208.236.45.80]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4690443FBD for ; Sun, 19 Jan 2003 09:51:24 -0800 (PST) (envelope-from scottl@btc.adaptec.com) Received: from redfish.adaptec.com (redfish.adaptec.com [162.62.50.11]) by magic.adaptec.com (8.11.6+Sun/8.11.6) with ESMTP id h0JHpMv03119 for ; Sun, 19 Jan 2003 09:51:22 -0800 (PST) Received: from btc.btc.adaptec.com (btc.btc.adaptec.com [10.100.0.52]) by redfish.adaptec.com (8.8.8+Sun/8.8.8) with ESMTP id JAA23153 for ; Sun, 19 Jan 2003 09:51:19 -0800 (PST) Received: from hollin.btc.adaptec.com (hollin [10.100.253.56]) by btc.btc.adaptec.com (8.8.8+Sun/8.8.8) with ESMTP id KAA20287 for ; Sun, 19 Jan 2003 10:51:17 -0700 (MST) Received: from hollin.btc.adaptec.com (localhost [127.0.0.1]) by hollin.btc.adaptec.com (8.12.6/8.12.6) with ESMTP id h0JHmQUH003741 for ; Sun, 19 Jan 2003 10:48:26 -0700 (MST) (envelope-from scottl@hollin.btc.adaptec.com) Received: (from scottl@localhost) by hollin.btc.adaptec.com (8.12.6/8.12.6/Submit) id h0JHmQL3003740 for current@freebsd.org; Sun, 19 Jan 2003 10:48:26 -0700 (MST) Date: Sun, 19 Jan 2003 10:48:26 -0700 From: Scott Long To: current@freebsd.org Subject: FreeBSD 5.0 Available Message-ID: <20030119174825.GD3656@hollin.btc.adaptec.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4i Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 It is my privilege and pleasure to announce the availability of FreeBSD 5.0-RELEASE. The culmination of nearly three years of work, this release starts FreeBSD on the path of advanced multiprocessor and application thread support and introduces support for the sparc64 and ia64 platforms. Among the long list of new and improved features: - UFS2, the second generation UFS filesystem, shatters the current 1TB filesystem barrier. - Background filesystem checking (bgfsck) and filesystem snapshots eliminate the need for downtime to do filesystem repair and backup tasks. - Experimental support for Mandatory Access Controls (MAC) provide an extensible and flexible means for administrators to define system security policies. - Fine-grained locking in the kernel paves the road for much higher efficiency of multi-processor systems. - Support for Bluetooth, ACPI, CardBus, IEEE 1394, and experimental hardware crypto acceleration keeps FreeBSD at the forefront of new technology. - The GCC 3.2.1 compiler provides the latest installment of the ever-improving GNU Compiler Collection. - GEOM, the extensible and flexible storage framework, and DEVFS, the device virtual filesystem, simplify storage and device management while opening the door for new enterprise storage technologies. - Support for the sparc64 and ia64 platforms expands FreeBSD's support of advanced 64-bit computing platforms. Although FreeBSD 5.0 contains a number of new and exciting features, it may not be suitable for all users. More conservative users may prefer to continue using FreeBSD 4.X. Information on the various trade-offs involved, as well as some notes on future plans for both FreeBSD 4.X and 5.X, can be found in the Early Adopter's Guide, available here: http://www.FreeBSD.org/releases/5.0R/early-adopter.html For a complete list of new features and known problems, please see the release notes and errata list, available here: http://www.FreeBSD.org/releases/5.0R/relnotes.html http://www.FreeBSD.org/releases/5.0R/errata.html For more information about FreeBSD release engineering activities, please see: http://www.FreeBSD.org/releng/ Availability - ------------ FreeBSD 5.0-RELEASE supports the i386, pc98, alpha, sparc64, and ia64 architectures and can be installed directly over the net using the boot floppies or copied to a local NFS/FTP server. Distributions for all architectures are available now. Please continue to support the FreeBSD Project by purchasing media from one of our supporting vendors. The following companies will be offering FreeBSD 5.0 based products: FreeBSD Mall, Inc. http://www.freebsdmall.com/ Daemonnews, Inc. http://www.bsdmall.com/freebsd1.html If you can't afford FreeBSD on media, are impatient, or just want to use it for evangelism purposes, then by all means download the ISO images. We can't promise that all the mirror sites will carry the larger ISO images, but they will at least be available from: ftp://ftp.FreeBSD.org/pub/FreeBSD/ ftp://ftp12.FreeBSD.org/pub/FreeBSD/ ftp://ftp.tw.FreeBSD.org/pub/FreeBSD/ ftp://ftp{2,3,4,5}.jp.freebsd.org/pub/FreeBSD/ ftp://ftp.cz.FreeBSD.org/pub/FreeBSD/ ftp://ftp7.de.FreeBSD.org/pub/FreeBSD/ ftp://ftp.lt.FreeBSD.org/pub/FreeBSD/ ftp://ftp2.za.FreeBSD.org/pub/FreeBSD/ ftp://ftp.se.FreeBSD.org/pub/FreeBSD/ ftp://ftp{1,2,4}.ru.FreeBSD.org/pub/FreeBSD/ FreeBSD is also available via anonymous FTP from mirror sites in the following countries: Argentina, Australia, Brazil, Bulgaria, Canada, China, Czech Republic, Denmark, Estonia, Finland, France, Germany, Hong Kong, Hungary, Iceland, Ireland, Japan, Korea, Lithuania, Mitchistan, the Netherlands, New Zealand, Poland, Portugal, Romania, Russia, Saudi Arabia, South Africa, Slovak Republic, Slovenia, Spain, Sweden, Taiwan, Thailand, Ukraine, and the United Kingdom. Before trying the central FTP site, please check your regional mirror(s) first by going to: ftp://ftp..FreeBSD.org/pub/FreeBSD Any additional mirror sites will be labeled ftp2, ftp3 and so on. More information about FreeBSD mirror sites can be found at: http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/mirrors-ftp.ht ml For instructions on installing FreeBSD, please see Chapter 2 of The FreeBSD Handbook. It provides a complete installation walk-through for users new to FreeBSD, and can be found online at: http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/install.html Acknowledgments - --------------- Many companies donated equipment, network access, or man-hours to finance the release engineering activities for FreeBSD 5.0 including The FreeBSD Mall, Compaq, Yahoo!, Sentex Communications, and NTT/Verio. The release engineering team for 5.0-RELEASE includes: Scott Long Release Engineering and Building Bruce A. Mah Release Engineering, Documentation Robert Watson Release Engineering, Security John Baldwin Release Engineering Murray Stokely Release Engineering Marcel Moolenaar IA64 Release Building Takahashi Yoshihiro PC98 Release Building Kris Kennaway Package Building Jacques A. Vidrine Security Officer -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (FreeBSD) iD8DBQE+KuGgHTr20QF8Xr8RAv9pAKDDxmMut+gXfcTHyD+Xo/ZIge1nTACeMTya EYft/KuEpuSFUyhCEQAaxh8= =3rQi -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message From owner-freebsd-current Sun Jan 19 11:28:44 2003 Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 58BDD37B414 for ; Sun, 19 Jan 2003 11:28:43 -0800 (PST) Received: from meitner.wh.uni-dortmund.de (meitner.wh.Uni-Dortmund.DE [129.217.129.133]) by mx1.FreeBSD.org (Postfix) with ESMTP id DCF9243E4A for ; Sun, 19 Jan 2003 11:28:41 -0800 (PST) (envelope-from michaelnottebrock@gmx.net) Received: from lofi.dyndns.org ([10.3.12.105]) by meitner.wh.uni-dortmund.de (8.10.2/8.10.2/SuSE Linux 8.10.0-0.3) with ESMTP id h0JIaRc16818 for ; Sun, 19 Jan 2003 19:36:28 +0100 X-Authentication-Warning: meitner.wh.uni-dortmund.de: Host [10.3.12.105] claimed to be lofi.dyndns.org Received: from gmx.net (kiste.my.domain [192.168.8.4]) (authenticated bits=0) by lofi.dyndns.org (8.12.6/8.12.6) with ESMTP id h0JJSQbG041104 (version=TLSv1/SSLv3 cipher=RC4-MD5 bits=128 verify=NO) for ; Sun, 19 Jan 2003 20:28:28 +0100 (CET) (envelope-from michaelnottebrock@gmx.net) Message-ID: <3E2AFC59.40707@gmx.net> Date: Sun, 19 Jan 2003 20:28:25 +0100 From: Michael Nottebrock User-Agent: Mozilla/5.0 (X11; U; Linux i386; en-US; rv:1.0.1) Gecko/20020823 Netscape/7.0 X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-current@freebsd.org Subject: 4.7-amd cannot mount exports from 5.0-RELEASE X-Enigmail-Version: 0.63.3.0 X-Enigmail-Supports: pgp-inline, pgp-mime Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit X-Virus-Scanned: by amavisd-new Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have upgraded a box from 4.7-p1 to 5.0-RELEASE. It exports all its filesystems ( /, /usr, /var ) via NFS. A 4.7-STABLE client used to mount in those exports on demand with amd, with the default amd-map and /net and /host. Since the upgrade to 5.0-RELEASE on the server, amd cannot mount the exports anymore. It hangs and after a while throws an error similar to amd[345]: mountd rpc failed: RPC: Timed out in the syslog. Let me stress that the configurations of both the server and client have not changed at all and are almost factory defaults - yet it just ceased working. The most peculiar thing is that the 4.7-STABLE client also mounts in /usr/ports/distfiles from the server statically - and that still works. .. (not subscribed to list - please CC me) - -- Regards, Michael Nottebrock -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (FreeBSD) Comment: Using GnuPG with Netscape - http://enigmail.mozdev.org iD8DBQE+KvxZXhc68WspdLARAm/ZAJ99pJMyz/PjM6bx5Uuc7nLFhHg5yQCbBg3a IaiXOMjN0iBiuCOQElnnxM4= =FYbe -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message From owner-freebsd-current Sun Jan 19 12: 0:39 2003 Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0AD6837B427; Sun, 19 Jan 2003 12:00:37 -0800 (PST) Received: from salmon.maths.tcd.ie (salmon.maths.tcd.ie [134.226.81.11]) by mx1.FreeBSD.org (Postfix) with SMTP id CDFFD43F83; Sun, 19 Jan 2003 12:00:15 -0800 (PST) (envelope-from dwmalone@maths.tcd.ie) Received: from walton.maths.tcd.ie by salmon.maths.tcd.ie with SMTP id ; 19 Jan 2003 19:59:59 +0000 (GMT) Date: Sun, 19 Jan 2003 19:59:57 +0000 From: David Malone To: Hajimu UMEMOTO Cc: current@FreeBSD.org, emulation@FreeBSD.org Subject: Re: [CFR] IPv6 support for Linux sym Message-ID: <20030119195957.GA54865@walton.maths.tcd.ie> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.3.25i Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, Jan 20, 2003 at 12:49:26AM +0900, Hajimu UMEMOTO wrote: > I wrote an IPv6 support for Linux sym. I've tested it with RHL8's > ftp(1) and ports/www/linux-phoenix, and it seems nicely running with > both an IPv4 and an IPv6. > You can obtain my patch from: > > http://www.imasy.or.jp/~ume/FreeBSD/linux-ipv6.diff I have a patch which is quite similar to this, but also reduces the use of the stackgap in the Linux networking code and breaks out things like socket, bind and listen into an implimentation and a syscall wrapper (extending Ian's work in this area). I took these patches far enough to get the linux version of telnet to speak IPv6. I was going to commit the patch, but there were two things holding me back: 1) I hadn't figured out the best way to deal with syscalls which copyout a sockaddr - I suspect we need a per-sysvec sockaddr copyout function to do this cleanly, but I'm open to suggestion. 2) The patches wouldn't compile on the alpha 'cos of some ifdefs in the linux emulation code. I just hadn't got around to resolving this. Maybe we could see if we could combine these patches? My patch is available at: http://www.maths.tcd.ie/~dwmalone/linux-socket David. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message From owner-freebsd-current Sun Jan 19 12: 8: 6 2003 Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9437B37B401 for ; Sun, 19 Jan 2003 12:08:05 -0800 (PST) Received: from smtp-send.myrealbox.com (smtp-send.myrealbox.com [192.108.102.143]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2F2A243F18 for ; Sun, 19 Jan 2003 12:08:05 -0800 (PST) (envelope-from wa1ter@hotmail.com) Received: from hotmail.com wa1ter@smtp-send.myrealbox.com [67.114.254.206] by smtp-send.myrealbox.com with NetMail SMTP Agent $Revision: 3.22 $ on Novell NetWare via secured & encrypted transport (TLS); Sun, 19 Jan 2003 13:08:06 -0700 Message-ID: <3E2B05EF.8030808@hotmail.com> Date: Sun, 19 Jan 2003 12:09:19 -0800 From: walt Organization: none User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.3a) Gecko/20030111 X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-current@freebsd.org Subject: Re: OpenOffice swriter working on -CURRENT References: In-Reply-To: Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Sheldon Hearn wrote: > Hi folks, > > Could someone with an up-to-date -CURRENT (as of anything since > Wednesday last week) and OpenOffice let me know whether OpenOffice's > swriter works? Mine definitely works okay, but I recompiled mine on Jan 14 just after Martin applied some patches. You may get better results if you rebuild OpenOffice. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message From owner-freebsd-current Sun Jan 19 14:34:47 2003 Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9719B37B401 for ; Sun, 19 Jan 2003 14:34:45 -0800 (PST) Received: from beast.freebsd.org (beast.freebsd.org [216.136.204.28]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5151143ED8 for ; Sun, 19 Jan 2003 14:34:45 -0800 (PST) (envelope-from des@FreeBSD.org) Received: from beast.freebsd.org (localhost [127.0.0.1]) by beast.freebsd.org (8.12.6/8.12.6) with ESMTP id h0JMYiJM015784 for ; Sun, 19 Jan 2003 14:34:44 -0800 (PST) (envelope-from des@beast.freebsd.org) Received: (from des@localhost) by beast.freebsd.org (8.12.6/8.12.6/Submit) id h0JMYi53015782 for current@freebsd.org; Sun, 19 Jan 2003 14:34:44 -0800 (PST) Date: Sun, 19 Jan 2003 14:34:44 -0800 (PST) From: Dag-Erling Smorgrav Message-Id: <200301192234.h0JMYi53015782@beast.freebsd.org> To: current@freebsd.org Subject: alpha tinderbox failure Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG -------------------------------------------------------------- >>> Rebuilding the temporary build tree -------------------------------------------------------------- >>> stage 1: bootstrap tools -------------------------------------------------------------- >>> stage 2: cleaning up the object tree -------------------------------------------------------------- >>> stage 2: rebuilding the object tree -------------------------------------------------------------- >>> stage 2: build tools -------------------------------------------------------------- >>> stage 3: cross tools -------------------------------------------------------------- >>> stage 4: populating /home/des/tinderbox/alpha/obj/h/des/src/alpha/usr/include -------------------------------------------------------------- >>> stage 4: building libraries -------------------------------------------------------------- >>> stage 4: make dependencies -------------------------------------------------------------- >>> stage 4: building everything.. -------------------------------------------------------------- ===> libexec/getty /h/des/src/libexec/getty/main.c: In function `main': /h/des/src/libexec/getty/main.c:335: syntax error before '!' token *** Error code 1 Stop in /h/des/src/libexec/getty. *** Error code 1 Stop in /h/des/src/libexec. *** Error code 1 Stop in /h/des/src. *** Error code 1 Stop in /h/des/src. *** Error code 1 Stop in /h/des/src. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message From owner-freebsd-current Sun Jan 19 14:42:45 2003 Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E175B37B401 for ; Sun, 19 Jan 2003 14:42:44 -0800 (PST) Received: from mail.evip.pl (mail.evip.com.pl [212.244.157.179]) by mx1.FreeBSD.org (Postfix) with ESMTP id D600B43E4A for ; Sun, 19 Jan 2003 14:42:43 -0800 (PST) (envelope-from w@evip.pl) Received: from w by mail.evip.pl with local (Exim 4.10) id 18aO9n-000OQx-00 for current@freebsd.org; Sun, 19 Jan 2003 23:43:11 +0100 Date: Sun, 19 Jan 2003 23:43:11 +0100 From: Wiktor Niesiobedzki To: current@freebsd.org Subject: Dummynet messages Message-ID: <20030119224311.GB89748@mail.evip.pl> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4i Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, sys/netinet/ip_dummynet.c: 975: if (q->avg >= fs->max_th) { /* average queue >= max threshold */ (...) 984: } else { 985: q->count = -1; 986: printf("- drop"); 987: return 1 ; 989: } is quite meaningless. Shouldn't be it at least DEB(printf("- drop")? Or better "drop - max_th exceeded"? Just a small proposition, I was quite confused, when I saw this message. Best regards, Wiktor Niesiobedzki To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message From owner-freebsd-current Sun Jan 19 15:31: 8 2003 Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DA5CE37B401 for ; Sun, 19 Jan 2003 15:31:06 -0800 (PST) Received: from hotmail.com (oe15.law9.hotmail.com [64.4.8.119]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8354D43E4A for ; Sun, 19 Jan 2003 15:31:06 -0800 (PST) (envelope-from haughtlists@hotmail.com) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sun, 19 Jan 2003 15:31:06 -0800 X-Originating-IP: [24.62.168.216] From: "Matt Haught" To: Subject: new wi0 slowness Date: Sun, 19 Jan 2003 18:31:01 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1106 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106 Message-ID: X-OriginalArrivalTime: 19 Jan 2003 23:31:06.0501 (UTC) FILETIME=[D6C58B50:01C2C012] Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have noticed the following with the new wi0. I have the 802.11 connection between my laptop running XP and my current box running as a hostap. I also have a IPSec tunnel between the current box and the laptop, but I don't think this could be causing the problems. While transferring files from samba on the current box to the laptop I got the following results: With the old wi0: average 5120.3Kb/s peak 7326.5Kb/s With top -S 85% interrupt cpu - 58% swi1: net 21.8% irq10: wi0 With the new wi0: average 877.0Kb/s peak 902.4Kb/s With top -S 11.6% interrupt cpu - 9% swi1: net 0.88% irq10: wi0 I am also getting hundreds of: "wi0: tx failed, retry limit exceeded" with the new driver under heavy load. In addition it get many random disconnects which I would not notice, except AIM gets logged out. I don't think it has anything to do with the ipsec tunnel as the SAD entries are still there and it only happen with the new wi kernel. I have tried FAST_IPSEC and it does work with the new wi0 driver where it would temporarily lock up the machine with the old one, but I'm not using it since I thought it may be causing a problem and its ends up that it did not make a difference. I am going to try it later without IPSec just to be sure. Under the new driver my card which sold as a D-link DWL-520 2.4GHz Wireless PCI card is shown as a: dmesg .... wi0: mem 0xe6000000-0xe6000fff irq 10 at device 15.0 on pci0 wi0: 802.11 address: 00:05:5d:fa:0e:b0 wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI) wi0: Intersil Firmware: Primary (1.0.7), Station (1.3.6) wi0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps .... I can change the media through ifconfig to DS/11Mbps or whatever, but it does not seem to change anything other then ifconfig will show "media: IEEE 802.11 Wireless Ethernet DS/11Mbps (DS/2Mbps )" rather then autoselect. The same slowness is still there. wicontrol shows it as having a TX rate (actual speed) of 2 no matter what. I can set the (selection) to anything such as 11, and again no change in the throughput or anything. I have also changed things with the old driver, and nothing changed with the throughput, and it also shows the (actual speed) as 2 but I get higher throughput. It seems to kinda have a mind of its own. Well if you need anymore info, just drop me a message. I enabled debugging for wi0 as a earlier post showed, but I had no idea what I was looking at :). --Matt To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message From owner-freebsd-current Sun Jan 19 15:52:34 2003 Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6FCB137B401 for ; Sun, 19 Jan 2003 15:52:31 -0800 (PST) Received: from mta5.snfc21.pbi.net (mta5.snfc21.pbi.net [206.13.28.241]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1DBC543E4A for ; Sun, 19 Jan 2003 15:52:31 -0800 (PST) (envelope-from mbsd@pacbell.net) Received: from atlas ([64.165.199.132]) by mta5.snfc21.pbi.net (iPlanet Messaging Server 5.1 HotFix 1.6 (built Oct 18 2002)) with ESMTP id <0H8Z00LPSJNH16@mta5.snfc21.pbi.net> for current@freebsd.org; Sun, 19 Jan 2003 15:52:30 -0800 (PST) Date: Sun, 19 Jan 2003 15:52:29 -0800 (PST) From: =?ISO-8859-1?Q?Mikko_Ty=F6l=E4j=E4rvi?= Subject: if_sis.c 1.61 breaks support for SiS630 chipset X-X-Sender: mikko@atlas.home To: current@freebsd.org Message-id: <20030119154822.O70415-100000@atlas.home> MIME-version: 1.0 Content-type: TEXT/PLAIN; charset=US-ASCII Content-transfer-encoding: 7BIT Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, Version 1.61 of if_sis.c breaks support for SiS630, or at least the one on my laptop. This has been noted before, in I just though I'd add some more details. The device probe fails with: sis0: MII without any PHY! pciconf reports the chip as: sis0@pci0:1:1: class=0x020000 card=0x020114ff chip=0x09001039 rev=0x82 hdr=0x00 vendor = 'Silicon Integrated Systems (SiS)' device = 'SiS900 Fast Ethernet/Home Networking Ctrlr' class = network subclass = ethernet Things start to go bad when sis_mii_readreg() ends up in the ack failure case (around line 622): /* * Now try reading data bits. If the ack failed, we still * need to clock through 16 cycles to keep the PHY(s) in sync. */ if (ack) { for(i = 0; i < 16; i++) { SIO_CLR(SIS_MII_CLK); DELAY(1); SIO_SET(SIS_MII_CLK); DELAY(1); } goto fail; } Conditionally reverting part of sis_miibus_readreg() to r1.60 is sufficient to make things work again: --- if_sis.c.1.62 Sun Jan 19 14:35:57 2003 +++ if_sis.c Sun Jan 19 15:14:54 2003 @@ -735,6 +735,39 @@ sc->sis_rev < SIS_REV_635 && phy != 0) return(0); +#if 1 + /* + * Hack: The new code below does not work with my sis630S. + * Revive working code from r1.60 + */ + + if (sc->sis_type == SIS_TYPE_900 && sc->sis_rev <= SIS_REV_630S) { + int i, val = 0; + + CSR_WRITE_4(sc, SIS_PHYCTL, + (phy << 11) | (reg << 6) | SIS_PHYOP_READ); + SIS_SETBIT(sc, SIS_PHYCTL, SIS_PHYCTL_ACCESS); + + for (i = 0; i < SIS_TIMEOUT; i++) { + if (!(CSR_READ_4(sc, SIS_PHYCTL) & SIS_PHYCTL_ACCESS)) + break; + } + + if (i == SIS_TIMEOUT) { + printf("sis%d: PHY failed to come ready\n", + sc->sis_unit); + return(0); + } + + val = (CSR_READ_4(sc, SIS_PHYCTL) >> 16) & 0xFFFF; + + if (val == 0xFFFF) + return(0); + + return(val); + } +#endif + bzero((char *)&frame, sizeof(frame)); frame.mii_phyaddr = phy; If anyone has theories for a more correct patch, I'll be happy to try them out. $.02, /Mikko To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message From owner-freebsd-current Sun Jan 19 16:51:37 2003 Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6C20D37B401 for ; Sun, 19 Jan 2003 16:51:34 -0800 (PST) Received: from alpha.yumyumyum.org (dsl092-171-091.wdc1.dsl.speakeasy.net [66.92.171.91]) by mx1.FreeBSD.org (Postfix) with ESMTP id AF81F43F1E for ; Sun, 19 Jan 2003 16:51:27 -0800 (PST) (envelope-from culverk@yumyumyum.org) Received: from alpha.yumyumyum.org (localhost [127.0.0.1]) by alpha.yumyumyum.org (8.12.6/8.12.6) with ESMTP id h0K0otXM011078 for ; Sun, 19 Jan 2003 19:50:55 -0500 (EST) (envelope-from culverk@yumyumyum.org) Received: from localhost (culverk@localhost) by alpha.yumyumyum.org (8.12.6/8.12.6/Submit) with ESMTP id h0K0otK6011075 for ; Sun, 19 Jan 2003 19:50:55 -0500 (EST) (envelope-from culverk@yumyumyum.org) X-Authentication-Warning: alpha.yumyumyum.org: culverk owned process doing -bs Date: Sun, 19 Jan 2003 19:50:55 -0500 (EST) From: Kenneth Culver To: freebsd-current@freebsd.org Subject: FreeBSD panic with umass Message-ID: <20030119194440.E11051-100000@alpha.yumyumyum.org> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-Spam-Status: No, hits=-0.5 required=5.0 tests=X_AUTH_WARNING,AWL version=2.31 Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I just tried to use a Genesys Logic USB Compact Flash card reader, and the following messages come up, followed by a panic: Jan 19 19:41:30 kenshin kernel: umass0: Genesys Logic USB Storage Device, rev 1. 10/1.13, addr 2 Jan 19 19:41:30 kenshin kernel: umass0: Get Max Lun not supported (STALLED) Jan 19 19:41:30 kenshin kernel: umass0: BBB reset failed, IOERROR Jan 19 19:41:30 kenshin kernel: umass0: BBB bulk-in clear stall failed, IOERROR Jan 19 19:41:30 kenshin kernel: umass0: BBB bulk-out clear stall failed, IOERROR Jan 19 19:41:30 kenshin kernel: umass0: BBB reset failed, IOERROR Jan 19 19:41:30 kenshin kernel: umass0: BBB bulk-in clear stall failed, IOERROR Jan 19 19:41:30 kenshin kernel: umass0: BBB bulk-out clear stall failed, IOERROR Jan 19 19:41:30 kenshin kernel: umass0: BBB reset failed, IOERROR Jan 19 19:41:30 kenshin kernel: umass0: BBB bulk-in clear stall failed, IOERROR Jan 19 19:41:30 kenshin kernel: umass0: BBB bulk-out clear stall failed, IOERROR Jan 19 19:41:30 kenshin kernel: umass0: BBB reset failed, IOERROR Jan 19 19:41:30 kenshin kernel: umass0: BBB bulk-in clear stall failed, IOERROR Jan 19 19:41:30 kenshin kernel: umass0: BBB bulk-out clear stall failed, IOERROR Jan 19 19:41:30 kenshin kernel: umass0: BBB reset failed, IOERROR Jan 19 19:41:30 kenshin kernel: umass0: BBB bulk-in clear stall failed, IOERROR Jan 19 19:41:30 kenshin kernel: umass0: BBB bulk-out clear stall failed, IOERROR Jan 19 19:41:30 kenshin kernel: umass0: BBB reset failed, IOERROR Jan 19 19:41:30 kenshin kernel: umass0: BBB bulk-in clear stall failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB bulk-out clear stall failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB reset failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB bulk-in clear stall failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB bulk-out clear stall failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB reset failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB bulk-in clear stall failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB bulk-out clear stall failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB reset failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB bulk-in clear stall failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB bulk-out clear stall failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB reset failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB bulk-in clear stall failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB bulk-out clear stall failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB reset failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB bulk-in clear stall failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB bulk-out clear stall failed, IOERROR Jan 19 19:41:31 kenshin kernel: (da0:umass-sim0:0:0:0): got CAM status 0x4 Jan 19 19:41:31 kenshin kernel: (da0:umass-sim0:0:0:0): fatal error, failed to a ttach to device Jan 19 19:41:31 kenshin kernel: (da0:umass-sim0:0:0:0): lost device Jan 19 19:41:31 kenshin kernel: umass0: BBB reset failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB bulk-in clear stall failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB bulk-out clear stall failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB reset failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB bulk-in clear stall failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB bulk-out clear stall failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB reset failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB bulk-in clear stall failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB bulk-out clear stall failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB reset failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB bulk-in clear stall failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB bulk-out clear stall failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB reset failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB bulk-in clear stall failed, IOERROR Jan 19 19:41:31 kenshin kernel: umass0: BBB bulk-out clear stall failed, IOERROR Jan 19 19:41:31 kenshin kernel: (da0:umass-sim0:0:0:0): removing device entry Jan 19 19:41:31 kenshin kernel: Opened disk da0 -> 5 After this, FreeBSD panics. I havn't had time to get a full backtrace, but I'll send that once I get it. In the mean-time, is there any fix for the error I'm getting? Ken To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message From owner-freebsd-current Sun Jan 19 17: 5:42 2003 Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CA42537B401 for ; Sun, 19 Jan 2003 17:05:40 -0800 (PST) Received: from spork.pantherdragon.org (spork.pantherdragon.org [206.29.168.146]) by mx1.FreeBSD.org (Postfix) with ESMTP id 380CB43EB2 for ; Sun, 19 Jan 2003 17:05:40 -0800 (PST) (envelope-from dmp@pantherdragon.org) Received: from sparx.techno.pagans (12-224-208-117.client.attbi.com [12.224.208.117]) by spork.pantherdragon.org (Postfix) with ESMTP id B02571005F; Sun, 19 Jan 2003 17:05:39 -0800 (PST) Received: from pantherdragon.org (speck.techno.pagans [172.21.42.2]) by sparx.techno.pagans (Postfix) with ESMTP id 21B53AA8F; Sun, 19 Jan 2003 17:05:38 -0800 (PST) Message-ID: <3E2B4B61.2090603@pantherdragon.org> Date: Sun, 19 Jan 2003 17:05:37 -0800 From: Darren Pilgrim User-Agent: Mozilla/5.0 (Windows; U; Win98; en-US; rv:1.1) Gecko/20020826 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Dag-Erling Smorgrav Cc: Kevin Oberman , freebsd-current@freebsd.org Subject: Re: How to build -current and install to empty slice? References: <20030117231450.A441C5D04@ptavv.es.net> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Dag-Erling Smorgrav wrote:> "Kevin Oberman" writes: > >>The first question is a bit tougher. > > > Not at all. Just prepare the slice so that it contains at least an > 'a' partition (so you can boot from it), mount the fresh partitions in > the correct places in relation to eachother (e.g. ad0s2a on /mnt, > ad0s2d on /mnt/var, ad0s2e on /mnt/usr), then install 5.0 on the > appropriate partitions. There are a number of ways to do the latter: > > - if you have successfully built a 5.0 world, do an installworld with > DESTDIR set to the root of the empty partitions (/mnt in our > example). Then go into the 'etc' directory in your 5.0 source tree > and do 'make distribution', again with DESTDIR set to the root of > the appropriate partitions. You will also need to build and > install a kernel, and install the first- and second-stage loaders > (using disklabel -B); the 4.x loaders should work fine, but you can > force disklabel to use the 5.0 loaders: > > # disklabel -B -b /mnt/boot/boot1 -s /mnt/boot/boot2 ad0s2 [For reference, I moved the base mountpoint to /5.] How do tell make to use /5/usr/obj instead of /usr/obj? Will MAKEOBJDIRPREFIX=/5/usr/obj do this? I have more questons: Can I force make to ignore /etc/make.conf and /etc/defaults/make.conf and read another set of config files? Would it be safe to use /5/usr/src/etc/defaults/make.conf? Will DESTDIR=/5 cause the new build tools to install under /5 as well, or do I need to set something else to avoid having my 4.7p3 build tools clobbered? So far I have this set of commands: # cd /5/usr/src && MAKEOBJDIRPREFIX=/5/usr/obj DESTDIR=/5 make buildworld # MAKEOBJDIRPREFIX=/5/usr/obj DESTDIR=/5 make kernel # MAKEOBJDIRPREFIX=/5/usr/obj DESTDIR=/5 make installworld # cd /5/usr/src/etc && DESTDIR=/5 make distribution # cd /5/usr/src/release/sysinstall && make clean && make all install # install -o root -g wheel -m 0555 /5/usr/src/etc/MAKEDEV /5/dev/MAKEDEV # cd /5/dev && ./MAKEDEV all ad4 ad4s2h ad4s3h ad4s4h ums1 vn1 vty16 # disklabel -B -b /mnt/boot/boot1 -s /mnt/boot/boot2 /dev/ad4s3 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message From owner-freebsd-current Sun Jan 19 17:25:16 2003 Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6166237B401 for ; Sun, 19 Jan 2003 17:25:12 -0800 (PST) Received: from pinyon.org (quine.pinyon.org [65.101.5.249]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6B1F243ED8 for ; Sun, 19 Jan 2003 17:25:11 -0800 (PST) (envelope-from rcarter@pinyon.org) Received: from quine.pinyon.org (localhost [127.0.0.1]) by pinyon.org (Postfix) with ESMTP id ED890319 for ; Sun, 19 Jan 2003 18:25:10 -0700 (MST) X-Mailer: exmh version 2.5 07/13/2001 with nmh-1.0.4 To: freebsd-current@freebsd.org Subject: Re: STABLE->CURRENT rl fails In-Reply-To: Message from "Russell L. Carter" of "Sat, 18 Jan 2003 11:29:40 MST." <20030118182940.D9B87147@pinyon.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Sun, 19 Jan 2003 18:25:10 -0700 From: "Russell L. Carter" Message-Id: <20030120012510.ED890319@pinyon.org> Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Ok-dokey, over to linux it goes. Rats. Russell : : : Perhaps there's a nice search string that will cough up what : to do, if there's hope? This laptop is perfectly stable with : STABLE. (But no sound or acpi...) : : Thanks, : Russell : : : : : Trial upgrade from a laptop running stable just fine for the last : : six months to current (GENERIC) is still failing with the same symptoms: : : : : On board rl0 comes up just fine, but a transfer hangs : : after about 150KB or so. After a minute or two, the laptop reboots. : : : : That's at 100BaseTX, plus the various mediaopts. At 10BaseT, : : it takes longer during a file transfer to trigger the problem, but : : it gets there after a megabyte or so. : : : : I've attached a dmesg, interesting "lock order reversal" item in it. : : : : I'm willing to dedicate a week or so to get this thing up because it's : : one of those ACPI only laptops. : : : : Tell me what to do to get better info... : : : : Thank you, : : Russell : : : : : : Copyright (c) 1992-2003 The FreeBSD Project. : : Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 : : The Regents of the University of California. All rights reserved. : : FreeBSD 5.0-CURRENT #0: Fri Jan 17 08:55:47 MST 2003 : : root@chomsky.hq.pinyon.org:/usr/obj/usr/src-current/src/sys/GENERIC : : Preloaded elf kernel "/boot/kernel/kernel" at 0xc06c3000. : : Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06c30a8. : : Timecounter "i8254" frequency 1193182 Hz : : Timecounter "TSC" frequency 1991920132 Hz : : CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz (1991.92-MHz 686-class CPU) : : Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 : : Features=0x3febf9ff : : real memory = 520093696 (496 MB) : : avail memory = 497917952 (474 MB) : : Initializing GEOMetry subsystem : : Pentium Pro MTRR support enabled : : npx0: on motherboard : : npx0: INT 16 interface : : acpi0: on motherboard : : ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15 : : ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31 : : Using $PIR table, 7 entries at 0xc00fdf50 : : Timecounter "ACPI-fast" frequency 3579545 Hz : : acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 : : acpi_cpu0: on acpi0 : : acpi_tz0: on acpi0 : : pcib0: port 0xcf8-0xcff on acpi0 : : pci0: on pcib0 : : agp0: mem 0xe8000000-0xe8ffffff at device 0.0 : : on pci0 : : pcib1: at device 1.0 on pci0 : : pci1: on pcib1 : : pci1: at device 0.0 (no driver attached) : : isab0: at device 2.0 on pci0 : : isa0: on isab0 : : ohci0: mem 0xe9000000-0xe9000fff irq 11 at device : : 2.2 on pci0 : : usb0: OHCI version 1.0, legacy support : : usb0: SMM does not respond, resetting : : usb0: on ohci0 : : usb0: USB revision 1.0 : : uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 : : uhub0: 2 ports with 2 removable, self powered : : ums0: Mitsumi Mitsumi Quick Scroll Mouse (USB), rev 1.00/1.05, addr 2, iclass : : 3/1 : : ums0: 3 buttons and Z dir. : : ohci1: mem 0xe9001000-0xe9001fff irq 10 at device : : 2.3 on pci0 : : usb1: OHCI version 1.0, legacy support : : usb1: on ohci1 : : usb1: USB revision 1.0 : : uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 : : uhub1: 2 ports with 2 removable, self powered : : atapci0: port 0x1000-0x100f at device 2.5 on pci0 : : ata0: at 0x1f0 irq 14 on atapci0 : : ata1: at 0x170 irq 15 on atapci0 : : pci0: at device 2.7 (no driver attached) : : rl0: port 0x1400-0x14ff mem 0x6004800-0x60048ff : : irq 11 at device 10.0 on pci0 : : rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode : : rl0: Ethernet address: 00:90:f5:12:59:3b : : miibus0: on rl0 : : rlphy0: on miibus0 : : rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto : : pci0: at device 11.0 (no driver attached) : : cbb0: mem 0x88000000-0x88000fff irq 5 at device : : 12.0 on pci0 : : cardbus0: on cbb0 : : pccard0: <16-bit PCCard bus> on cbb0 : : acpi_button0: on acpi0 : : acpi_button1: on acpi0 : : acpi_acad0: on acpi0 : : acpi_cmbat0: on acpi0 : : acpi_lid0: on acpi0 : : atkbdc0: port 0x64,0x60 irq 1 on acpi0 : : atkbd0: flags 0x1 irq 1 on atkbdc0 : : kbd0 at atkbd0 : : psm0: irq 12 on atkbdc0 : : psm0: model Generic PS/2 mouse, device ID 0 : : sio0 port 0x3f8-0x3ff irq 4 on acpi0 : : sio0: type 16550A : : acpi_ec0: port 0x66,0x62 on acpi0 : : orm0: