Date: Fri, 25 Sep 2009 21:10:02 GMT From: Olivier Cochard-Labbe <olivier@cochard.me> To: freebsd-bugs@FreeBSD.org Subject: kern/139143: [regression] PATA hard drive not detected with 8.0-RC1 Message-ID: <200909252110.n8PLA2ob006050@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/139143; it has been noted by GNATS.
From: Olivier Cochard-Labbe <olivier@cochard.me>
To: freebsd-gnats-submit@FreeBSD.org
Cc:
Subject: kern/139143: [regression] PATA hard drive not detected with 8.0-RC1
Date: Fri, 25 Sep 2009 20:53:11 GMT
>Number: 139143
>Category: kern
>Synopsis: [regression] PATA hard drive not detected with 8.0-RC1
>Confidential: no
>Severity: serious
>Priority: low
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Fri Sep 25 21:00:12 UTC 2009
>Closed-Date:
>Last-Modified:
>Originator: Olivier Cochard-Labbe
>Release: 8.0 RC1
>Organization:
FreeNAS/BSDRP
>Environment:
>Description:
Hi,
I meet a regression since 8.0 Beta1 to 8.0 RC1.
They can't detect my PATA (UDMA?100) hard drive (which works great under FreeBSD 7.2).
During bootup, I've got lot's of theses error messages:
ad0: FAILURE - READ_DMA48 timed out LBA=586072366
ad0: TIMEOUT - READ_DMA retrying (1 retries left) LBA=0
ad0: FAILURE - READ_DMA48 timed out LBA=586072351
ad0: TIMEOUT - READ_DMA retrying (0 retries left) LBA=0
ad0: FAILURE - READ_DMA48 timed out LBA=586072351
(...)
ad0: FAILURE - READ_DMA48 status=51 <READY,DSC,ERROR> error=10<NID_NOT_FOUND> LBA=596072367
ad0: FAILURE - READ_DMA48 timed out LBA=586072366
ad0: TIMEOUT - READ_DMA retrying (1 retries left) LBA=128
ad0: TIMEOUT - READ_DMA retrying (0 retries left) LBA=128
ad0: FAILURE - READ_DMA48 timed out LBA=586072351
(...)
This scan step takes a long times (about 5 minutes), then it continue to boot, but without detecting the hard drive.
My system use an Asus K8N4-E Delux motherboard (nVidia nForce CK804 UDMA133 controller).
You can found on the attached file, the dmesge and pcinfo -lv from my working FreeBSD 7.2.
Thanks,
>How-To-Repeat:
Booting the system with FreeBSD 8.0 RC1 memstick release.
>Fix:
Patch attached with submission follows:
[olivier@dev64]~>dmesg
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE-p2 #0: Wed Jun 24 00:14:35 UTC 2009
root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3000+ (2010.31-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x20fc2 Stepping = 2
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
AMD Features2=0x1<LAHF>
usable memory = 2134417408 (2035 MB)
avail memory = 2058027008 (1962 MB)
ACPI APIC Table: <Nvidia AWRDACPI>
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <Nvidia AWRDACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7fef0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xd3003000-0xd3003fff irq 21 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 10 ports with 10 removable, self powered
atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <nVidia nForce CK804 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xd800-0xd80f mem 0xd3002000-0xd3002fff irq 22 at device 7.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
atapci2: <nVidia nForce CK804 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc400-0xc40f mem 0xd3001000-0xd3001fff irq 23 at device 8.0 on pci0
atapci2: [ITHREAD]
ata4: <ATA channel 0> on atapci2
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
ata5: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci5: <ACPI PCI bus> on pcib1
nfe0: <NVIDIA nForce4 CK804 MCP9 Networking Adapter> port 0xb000-0xb007 mem 0xd3000000-0xd3000fff irq 21 at device 10.0 on pci0
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1111 Gigabit PHY> PHY 15 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
nfe0: Ethernet address: 00:13:d4:d6:3a:7b
nfe0: [FILTER]
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci2: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci1: <ACPI PCI bus> on pcib5
vgapci0: <VGA-compatible display> mem 0xd0000000-0xd0ffffff,0xc0000000-0xcfffffff,0xd1000000-0xd1ffffff irq 18 at device 0.0 on pci1
acpi_tz0: <Thermal Zone> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
powernow0: <Cool`n'Quiet K8> on cpu0
orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub1: <BTC USB Keyboard, class 9/0, rev 1.10/0.03, addr 2> on uhub0
uhub1: 2 ports with 1 removable, bus powered
ukbd0: <BTC USB Keyboard, class 0/0, rev 1.10/0.03, addr 3> on uhub1
kbd2 at ukbd0
uhid0: <BTC USB Keyboard, class 0/0, rev 1.10/0.03, addr 3> on uhub1
ums0: <vendor 0x04b3 USB Optical Mouse, class 0/0, rev 2.00/2.00, addr 4> on uhub1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 2010312369 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 286168MB <SAMSUNG HD300LD WK100-12> at ata0-master UDMA100
ad8: 953869MB <SAMSUNG HD103UJ 1AA01113> at ata4-master SATA150
GEOM: ad0: the secondary GPT table is corrupt or invalid.
GEOM: ad0: using the primary only -- recovery suggested.
GEOM_LABEL: Label for provider ad0p1 is ufsid/477f45096d16161b.
GEOM_LABEL: Label for provider ad0p1 is ufs/Disque1.
GEOM_LABEL: Label for provider ad0s1a is ufsid/4a675b954a5764b7.
GEOM_LABEL: Label for provider ad8p1 is ufsid/499c8ec590cbe4cd.
GEOM_LABEL: Label for provider ad8p1 is ufs/1TB3.
Trying to mount root from ufs:/dev/ad0s1a
GEOM_LABEL: Label ufs/Disque1 removed.
GEOM_LABEL: Label ufsid/477f45096d16161b removed.
GEOM_LABEL: Label ufsid/4a675b954a5764b7 removed.
GEOM_LABEL: Label for provider ad0s1a is ufsid/4a675b954a5764b7.
GEOM_LABEL: Label ufsid/4a675b954a5764b7 removed.
GEOM_LABEL: Label ufsid/499c8ec590cbe4cd removed.
WARNING: /mnt was not properly dismounted
kqemu version 0x00010400
kqemu: KQEMU installed, max_locked_mem=1042196kB.
[olivier@dev64]~>pciconf -lv
none0@pci0:0:0:0: class=0x058000 card=0x815a1043 chip=0x005e10de rev=0xa3 hdr=0x00
vendor = 'Nvidia Corp'
device = 'nForce4 Memory Controller'
class = memory
isab0@pci0:0:1:0: class=0x060100 card=0x815a1043 chip=0x005010de rev=0xa3 hdr=0x00
vendor = 'Nvidia Corp'
device = 'nForce4 PCI to ISA Bridge'
class = bridge
subclass = PCI-ISA
none1@pci0:0:1:1: class=0x0c0500 card=0x815a1043 chip=0x005210de rev=0xa2 hdr=0x00
vendor = 'Nvidia Corp'
device = 'nForce4 SMBus'
class = serial bus
subclass = SMBus
ohci0@pci0:0:2:0: class=0x0c0310 card=0x815a1043 chip=0x005a10de rev=0xa2 hdr=0x00
vendor = 'Nvidia Corp'
device = 'nForce4 USB Controller'
class = serial bus
subclass = USB
atapci0@pci0:0:6:0: class=0x01018a card=0x815a1043 chip=0x005310de rev=0xf2 hdr=0x00
vendor = 'Nvidia Corp'
device = 'NVidia nForce 4 SLI IDE Controller'
class = mass storage
subclass = ATA
atapci1@pci0:0:7:0: class=0x010185 card=0x815a1043 chip=0x005410de rev=0xf3 hdr=0x00
vendor = 'Nvidia Corp'
device = 'NVidia nForce 4 SLI IDE Controller'
class = mass storage
subclass = ATA
atapci2@pci0:0:8:0: class=0x010185 card=0x815a1043 chip=0x005510de rev=0xf3 hdr=0x00
vendor = 'Nvidia Corp'
device = 'NVidia nForce 4 SLI IDE Controller'
class = mass storage
subclass = ATA
pcib1@pci0:0:9:0: class=0x060401 card=0x00000000 chip=0x005c10de rev=0xa2 hdr=0x01
vendor = 'Nvidia Corp'
device = 'nForce4 PCI Bridge'
class = bridge
subclass = PCI-PCI
nfe0@pci0:0:10:0: class=0x068000 card=0x81411043 chip=0x005710de rev=0xa3 hdr=0x00
vendor = 'Nvidia Corp'
device = 'nForce4 Ultra NVidia Network Bus Enumerator'
class = bridge
pcib2@pci0:0:11:0: class=0x060400 card=0x00000000 chip=0x005d10de rev=0xa3 hdr=0x01
vendor = 'Nvidia Corp'
device = 'nForce4 PCIe Bridge'
class = bridge
subclass = PCI-PCI
pcib3@pci0:0:12:0: class=0x060400 card=0x00000000 chip=0x005d10de rev=0xa3 hdr=0x01
vendor = 'Nvidia Corp'
device = 'nForce4 PCIe Bridge'
class = bridge
subclass = PCI-PCI
pcib4@pci0:0:13:0: class=0x060400 card=0x00000000 chip=0x005d10de rev=0xa3 hdr=0x01
vendor = 'Nvidia Corp'
device = 'nForce4 PCIe Bridge'
class = bridge
subclass = PCI-PCI
pcib5@pci0:0:14:0: class=0x060400 card=0x00000000 chip=0x005d10de rev=0xa3 hdr=0x01
vendor = 'Nvidia Corp'
device = 'nForce4 PCIe Bridge'
class = bridge
subclass = PCI-PCI
hostb0@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = '(K8) Athlon 64/Opteron HyperTransport Technology Configuration'
class = bridge
subclass = HOST-PCI
hostb1@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = '(K8) Athlon 64/Opteron Address Map'
class = bridge
subclass = HOST-PCI
hostb2@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = '(K8) Athlon 64/Opteron DRAM Controller'
class = bridge
subclass = HOST-PCI
hostb3@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = '(K8) Athlon 64/Opteron Miscellaneous Control'
class = bridge
subclass = HOST-PCI
vgapci0@pci0:1:0:0: class=0x030000 card=0x00000000 chip=0x01d310de rev=0xa1 hdr=0x00
vendor = 'Nvidia Corp'
device = 'GeForce 7300 SE'
class = display
subclass = VGA
>Release-Note:
>Audit-Trail:
>Unformatted:
_______________________________________________
freebsd-bugs@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-bugs
To unsubscribe, send any mail to "freebsd-bugs-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200909252110.n8PLA2ob006050>