Date: Wed, 7 Dec 2005 11:49:50 -0800 (PST) From: bsd@rio.com To: freebsd-questions@freebsd.org Subject: PowerEdge 2850 AMD64 panics Message-ID: <2036.66.178.172.201.1133984990@66.178.172.201>
next in thread | raw e-mail | index | archive | help
This is my first post to the FreeBSD mailing list, and unfortunatley its
because I've been having a vexing problem with one of my servers.
The machine in question is a Dell PowerEdge 2850 w/2 3Ghz EMT64 Xeons,
2gbs of ram, a Perc 4e/Di w/6 300GB drives.
This machines primary function is as a mail server running Exim.
Below is a DMESG from this machine.
This machine is running the AMD64 port of freebsd, and what is happening
is often when the volume of incoming mail gets pretty high, the machine
will panic and reboot. I have tried to capture a dump but it always fails
dumping before it completes, usually before its dumped more then 24MB. The
few times that I have seen the console when its happened the panic was
something to do with UFS. I have upgraded the bios and firmwares on
everything, and that increased the stability of the machine. I also turned
off soft updates on all the file systems, which also further increased
stability, however there is still a problem. Any
pointers/hints/tips/solutions would be greatly appreciated. Also, if more
information is needed let me know and I would be happy to provide it.
Thanks in advance for any help you may be able to give.
Stacy Anable
Rio Communications
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE-p7 #0: Thu Oct 6 11:13:54 PDT 2005
vince@mail.rio.com:/usr/obj/usr/src/sys/MAIL
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.00GHz (2992.71-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0xf43 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x641d<SSE3,RSVD2>,MON,DS_CPL,CNTX-ID,CX16,<b14>>
AMD Features=0x20100800<SYSCALL,NX,LM>
Hyperthreading: 2 logical CPUs
real memory = 2147221504 (2047 MB)
avail memory = 2064646144 (1969 MB)
ACPI APIC Table: <DELL PE BKC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ioapic0: Changing APIC ID to 8
ioapic1: Changing APIC ID to 9
ioapic1: WARNING: intbase 32 != expected base 24
ioapic2: Changing APIC ID to 10
ioapic2: WARNING: intbase 64 != expected base 56
ioapic3: Changing APIC ID to 11
ioapic3: WARNING: intbase 96 != expected base 88
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 32-55 on motherboard
ioapic2 <Version 2.0> irqs 64-87 on motherboard
ioapic3 <Version 2.0> irqs 96-119 on motherboard
acpi0: <DELL PE BKC> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0:
<ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
amr0: <LSILogic MegaRAID 1.51> mem
0xdfec0000-0xdfefffff,0xd80f0000-0xd80fffff irq 46 at device 14.0 on pci2
amr0: <LSILogic PERC 4e/Di> Firmware 521S, BIOS H430, 256MB RAM
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pci6: <ACPI PCI bus> on pcib6
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
0xecc0-0xecff mem 0xdfbe0000-0xdfbfffff irq 64 at device 7.0 on pci6 em0:
Ethernet address: 00:14:22:10:4f:c2
em0: Speed:N/A Duplex:N/A
pcib7: <ACPI PCI-PCI bridge> at device 0.2 on pci5
pci7: <ACPI PCI bus> on pcib7
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
0xdcc0-0xdcff mem 0xdf9e0000-0xdf9fffff irq 65 at device 8.0 on pci7 em1:
Ethernet address:
em1: Speed:N/A Duplex:N/A
pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 0.0 on pci8
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 0.2 on pci8
pci10: <ACPI PCI bus> on pcib10
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci11: <ACPI PCI bus> on pcib11
pci11: <unknown> at device 5.0 (no driver attached)
pci11: <unknown> at device 5.1 (no driver attached)
pci11: <unknown> at device 5.2 (no driver attached)
atapci0: <SiI 0680 UDMA133 controller> port
0xcc70-0xcc7f,0xccd0-0xccd3,0xccd8-0xccdf,0xcce4-0xcce7,0xccf0-0xccf7 irq
23 at device 6.0 on pci11
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
pci11: <display, VGA> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port
0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
orm0: <ISA Option ROMs> at iomem 0xec000-0xeffff,0xc0000-0xcafff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: CDRW <TSSTcorpCD-RW/DVD-ROM TSL462C/DE01> at ata0-master PIO4
ata2-master: FAILURE - SETFEATURES SET TRANSFER MODE
status=41<READY,ERROR> error=4<ABORTED>
ata2-slave: FAILURE - SETFEATURES SET TRANSFER MODE status=41<READY,ERROR>
error=4<ABORTED>
acd1: CDROM <VIRTUALCDROM DRIVE/> at ata2-slave BIOSPIO
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 1430400MB (2929459200 sectors) RAID 5 (optimal)
ses0 at amr0 bus 0 target 6 lun 0
ses0: <PE/PV 1x6 SCSI BP 1.0> Fixed Processor SCSI-2 device
ses0: SAF-TE Compliant Device
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Mounting root from ufs:/dev/amrd0s1a
em0: Link is up 1000 Mbps Full Duplex
em1: Link is up 1000 Mbps Full Duplex
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2036.66.178.172.201.1133984990>