Date: Wed, 15 Mar 2000 09:37:57 -0800 (PST) From: FreeBSD Security Officer <security-officer@freebsd.org> Subject: FreeBSD Security Advisory: FreeBSD-SA-00:10.orville-write Message-ID: <20000315173757.8949337BEBE@hub.freebsd.org>
next in thread | raw e-mail | index | archive | help
-----BEGIN PGP SIGNED MESSAGE-----
=============================================================================
FreeBSD-SA-00:10 Security Advisory
FreeBSD, Inc.
Topic: orville-write port contains local root compromise.
Category: ports
Module: orville-write
Announced: 2000-03-15
Affects: Ports collection before the correction date.
Corrected: 2000-03-09
FreeBSD only: Yes
I. Background
Orville-write is a replacement for the write(1) command, which
provides improved control over message delivery and other features.
II. Problem Description
One of the commands installed by the port is incorrectly installed
with setuid root permissions. The 'huh' command should not have any
special privileges since it is intended to be run by the local user to
view his saved messages.
The orville-write port is not installed by default, nor is it "part of
FreeBSD" as such: it is part of the FreeBSD ports collection, which
contains over 3100 third-party applications in a ready-to-install
format. The FreeBSD 4.0-RELEASE ports collection is not vulnerable to
this problem.
FreeBSD makes no claim about the security of these third-party
applications, although an effort is underway to provide a security audit of
the most security-critical ports.
III. Impact
A local user can exploit a buffer overflow in the 'huh' utility to
obtain root privileges.
If you have not chosen to install the orville-write port/package, then
your system is not vulnerable.
IV. Workaround
Remove the orville-write port if you have installed it.
V. Solution
Remove the setuid bit from the huh utility, by executing the following
command as root:
chmod u-s /usr/local/bin/huh
It is not necessary to reinstall the orville-write port, although this
can be done in one of the following ways if desired:
1) Upgrade your entire ports collection and rebuild the orville-write port.
2) Reinstall a new package dated after the correction date, obtained from:
ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/i386/packages-3-stable/misc/orville-write-2.41a.tgz
ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/i386/packages-4-current/misc/orville-write-2.41a.tgz
ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/alpha/packages-4-current/misc/orville-write-2.41a.tgz
Note: it may be several days before the updated packages are available.
3) download a new port skeleton for the orville-write port from:
http://www.freebsd.org/ports/
and use it to rebuild the port.
4) Use the portcheckout utility to automate option (3) above. The
portcheckout port is available in /usr/ports/devel/portcheckout or the
package can be obtained from:
ftp://ftp.freebsd.org/pub/FreeBSD/ports/packages/devel/portcheckout-1.0.tgz
-----BEGIN PGP SIGNATURE-----
Version: 2.6.2
iQCVAwUBOM/KWlUuHi5z0oilAQHk3AP+PEWNZ95ou8Oyf0nFzgAvjRCc4T060cJf
8qncBFmbWKvl/VHGJnj+u5HPE2LciZb/SdQxH0Ibuvm45hjt7umRrNcHQABmhtYV
9kG2k2cG+w9QtPnWQUtk7UDAQ2nmbyvQBsUJI+wrILoTHaKU1nLBivzzQbZPX9Nr
YTNtkrInpV0=
=c84W
-----END PGP SIGNATURE-----
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-security-notifications" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000315173757.8949337BEBE>