From owner-freebsd-stable Tue Apr 13 18:52:39 1999 Delivered-To: freebsd-stable@freebsd.org Received: from warped.cswnet.com (warped.cswnet.com [209.136.201.6]) by hub.freebsd.org (Postfix) with SMTP id 89038152A7 for ; Tue, 13 Apr 1999 18:52:35 -0700 (PDT) (envelope-from lambert@warped.cswnet.com) Received: from gronk.csw.net ( [209.136.201.13] ) by warped.cswnet.com (Hethmon Brothers Smtpd) ; Tue, 13 Apr 1999 19:51:04 -0600 Message-Id: <199904131951.0418241.6@warped.cswnet.com> From: lambert@warped.cswnet.com Date: Tue, 13 Apr 1999 15:11:58 -0500 To: freebsd-stable@freebsd.org Subject: Problems compiling the kernel on SCSI -STABLE X-Mailer: MR/2 Internet Cruiser Edition for OS/2 v1.60 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I have a system that won't compile the kernel or do other large compiles. It is using the same basic parts as a couple of other machines here which work properly. The parts list includes: Gigabyte GA-6BXDS rev 1.7 MotherBoard AIC-7895P on the mobo CH A - bus 0 targ 0 lun 0 - Seagate Barracuda ST34501W CH B - bus 0 targ 1 lun 0 - Seagate Barracuda ST39173LW bus 0 targ 2 lun 0 - Seagate Barracuda ST39173W 256MB ECC RAM (2*128MB sticks) 1 - 400Mhz PII 512K L2 Trident 9875 VGA Intel EtherExpress Pro 10/100+ 3.5" Floppy 1.44MB 104-key Keyboard Everything installs just fine. I can run RC5DES for days with no ill effects. To me that rules out CPU overtemp problems. When compiling the kernel with all parts installed, it will get partway through the compile and hard lock. The keyboard will not respond and a power-cycle is required. If I remove the EtherExpress card the compile completes. So I bought a new card thinking that this one had gone bad. No such luck. I have swapped out the memory. I've swapped the video. I can't swap out the disks but have removed all but the 4.5GB drive with the same results. The only wierd thing in my dmesg output seems to be a warning about using too many ports on the controller even when only one port is in use. So, I turn to you guys. What have I missed? dmesg with GENERIC kernel: Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.1-19990218-STABLE #0: Thu Feb 18 10:56:19 GMT 1999 root@usw3.freebsd.org:/usr/src/sys/compile/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Xeon/Celeron (398.94-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping=2 Features=0x183fbff> real memory = 268435456 (262144K bytes) avail memory = 257904640 (251860K bytes) Preloaded elf kernel "kernel" at 0xf0340000. Probing for devices on PCI bus 0: chip0: rev 0x03 on pci0.0.0 chip1: rev 0x03 on pci0.1.0 chip2: rev 0x02 on pci0.7.0 ide_pci0: rev 0x01 on pci0.7.1 chip3: rev 0x02 on pci0.7.3 fxp0: rev 0x05 int a irq 5 on pci0.9.0 fxp0: Ethernet address 00:90:27:0d:4a:5d ahc0: rev 0x04 int a irq 11 on pci0.12.0 ahc0: Illegal cable configuration!!. Only two connectors on the adapter may be used at a time! ahc0: aic7895 Wide Channel A, SCSI Id=7, 16/255 SCBs ahc1: rev 0x04 int b irq 11 on pci0.12.1 ahc1: Using left over BIOS settings ahc1: aic7895 Wide Channel B, SCSI Id=7, 16/255 SCBs Probing for devices on PCI bus 1: vga0: rev 0xf3 int a irq 11 on pci1.0.0 Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> ed0 not found at 0x280 fe0 not found at 0x300 atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 not found sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 not found at 0x1f0 wdc1 not found at 0x170 wt0 not found at 0x300 mcd0 not found at 0x300 matcdc0 not found at 0x230 scd0 not found at 0x230 ppc0 at 0x378 irq 7 on isa ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode nlpt0: on ppbus 0 nlpt0: Interrupt-driven port ppi0: on ppbus 0 plip0: on ppbus 0 ie0: unknown board_id: f000 ie0 not found at 0x300 ep0 not found at 0x300 ex0 not found le0 not found at 0x300 lnc0 not found at 0x280 ze0 not found at 0x300 zp0 not found at 0x300 cs0 not found at 0x300 adv0 not found at 0x330 bt0 not found at 0x134 aha0 not found at 0x134 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface Waiting 15 seconds for SCSI devices to settle changing root device to da0s1a da0 at ahc0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 20.0MB/s transfers (10.0MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 4339MB (8887200 512 byte sectors: 255H 63S/T 553C) da1 at ahc1 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-2 device da1: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled da1: 8683MB (17783240 512 byte sectors: 64H 32S/T 8683C) da2 at ahc1 bus 0 target 2 lun 0 da2: Fixed Direct Access SCSI-2 device da2: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled da2: 8683MB (17783240 512 byte sectors: 64H 32S/T 8683C) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message